Question about Hyundai Cars & Trucks

Open Question

Location of pcv valve on Hyundai xg 350 - Hyundai Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chrischronic
  • 235 Answers

SOURCE: 2002 LINCOLN LS V6 3.0 PCV VALVE LOCATION

it is down under the intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few.

Posted on Feb 19, 2009

  • 1 Answer

SOURCE: 2003 FORD EXPEDITION PCV VALVE LOCATION

show me a picture. everyone else says it's on the passenger side. nothing white on driver side of my 03 expedition.

Posted on Mar 07, 2009

honeymokey
  • 3113 Answers

SOURCE: PCV Valve Location

Its in the upper intake manifold on passanger side. Inside the manifold. Be sure to put o-ring on pcv or check engine light will come on.

Posted on May 25, 2009

dnewcombe1
  • 1564 Answers

SOURCE: pcv valve location on jaguar

This is just a suggestion, but, many newer vehicles don not utilize a pcv valve anymore.

Posted on Aug 28, 2009

mitchbtu
  • 121 Answers

SOURCE: Where is pcv valve located on 2005 taurus

It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard and and turn flasher hyundai XG 350 l not working


Locate position of turn signal flash unit in your owners manual. Usually near the fuse box. Replace flasher unit - parts store like AutoZone can help you find location of flasher and replacement unit.

Jun 15, 2015 | Hyundai XG350 Cars & Trucks

1 Answer

Camshaft sesor location hyudia xg 350


no year, azera? why not name car?????
?
always on the the end of the cam.
but on a Toyota, XG 350, not a clue..... read blue box above,. ugh !
i will not do posts , no year, and get funky no country.. for most.
dig,dig ,bam
XG350 name was used as of 2002 to reflect the new 3.5 L version of the Sigma V6.
ok the 3.5L
i looked online and 9 engines, shows CMP but not 3.5L

autozoned
"On the 3.5L engine, the sensor is located at the front of the engine near the camshaft gear."
this engine has VVT with 2 sensors and 2 vvt solenoids
finding the real CMP is hard. sure.
part 39318 CMP
it exactly here, so you can find any part ad Hyundai. just look


http://www.jimellishyundaiparts.com/images/parts/Hyundai/fullsize/HMA3L0PA0520-21104.jpg

clear huh?
this is best covered with a REAL FSM
and if PCM is throwing codes, do not assume this part is bad
they rarely go bad... instead post the code. DTC.

what if the chain was loose. the sensor will read wrong,
just one lil, example.

Jan 23, 2014 | Toyota Tacoma Cars & Trucks

1 Answer

Where is the pcv valve located on a 2003 hyundai sonata


I have a 2003 Hyundai Sonata GLS 2.7L V6 , I'm having a problem locating the pcv valve. I was told it was on the valve cover near the fire wall. Is it located near the throttle body? i have to take off the intake to change the plugs so I'm sure I will find it then. Just thought I would ask someone that has pervious experience. Thanks for anyone's input.

Apr 08, 2012 | Hyundai Cars & Trucks

1 Answer

Locate the starter


The starter motor will engage the gear in the transmission bell housing to rotate the engine, so it will be mounted on the side of the transmission. The illustration shows the XG-300 and XG-350.


10_1_2011_2_37_23_am.jpg

Sep 30, 2011 | 2004 Hyundai Elantra

1 Answer

Yes i took my hyundai xg 350 L to a hyundai dealer to get my timing belt changed and a transmission flush amd new spark plugs and wires and spent over twelve hundred dollars and my car is running worse...


Having once owned a trans repair business,I wouldn't
flush a trans,as you may get fine sediment in the valve
body and solenoids

I suspect they installed your timing belt incorrectly
or some othe issue

You should have a new water pump also
No one does a timing belt and not the water pump

Mar 21, 2011 | Hyundai XG350 Cars & Trucks

2 Answers

Where is the speed sensor for a 2004 hyundai xg 350, and how do i replace it


That sensor is located on the transmission near the RH axel. 10mm bolt secures it. It's a 'Hall" sensor. When replacing, remember to reinstall the horse-shoe clip which retains the gear to it.

Sep 11, 2010 | 2004 Hyundai XG350

1 Answer

Need to locate spark plugs on 2004 hyudai xg 350 6 cyl 3.5


once you remove the engine cover, on each valve cover you will see coil packs. remove these coil packs and right underneath are the spark plugs. replace with either ngk or nippondenso. happy holidays

Dec 30, 2009 | 2002 Hyundai XG350

1 Answer

PCV Valve location


It should sit in your valve cover. On the passenger side (if I remember correctly). It should be right on your valve cover with a line that attaches to the top of it.

May 05, 2009 | 2008 Hyundai Veracruz

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...