Question about 2000 Daewoo Lanos

Open Question

Tappet setting daewoo tacuma 2004

Noisy tappets no loss of power

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: Daewoo Tacuma 2ltr petrol 2002

chance are you have a pinched wire in the door jam and when you shut the door its grounding out...

Posted on Apr 29, 2010

czaa
  • 4514 Answers

SOURCE: just bought this 2nd had and drove it home and

probly need new head or valvegasket-pop hood and inspec motor to trace oil leak always chec out auto before purchase-20 min is worthwhile

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I SET NOISY TAPETS FOR TAYOTA CONQUEST


First of all, make sure it has tappets. In our country, Toyota Conquests have overhead camshafts, which means they don't have tappets. The camshafts drive the valves down with cam followers - these are metal caps on the valves that run directly against the cams. These caps are either self-adjusted hydraulically, or set by inserting shims inside the caps.

Feb 11, 2015 | Toyota Celica Cars & Trucks

1 Answer

How do i set the TAPPETS on a Nissan TD27 2005


tappets cannot be tight and noisy at the same time . Check the rocker and rocker shaft for wear in the shaft and rocker bushes.

Mar 21, 2014 | Cars & Trucks

1 Answer

Kia carens problems


Tappets......... perhaps is what your friend said. The tappets are part of the engine inlet and exhaust valve set up. Most tappets are self adjusting in modern motors, (Hydraulic).
The old fashioned tappets are manually adjusted during regular car servicing. This happens at set intervals, for instance every 20,000 miles.
Inlet valves allow air and fuel into the engine and exhaust valves let the burnt fuel and air out.
Tappets are fitted between the inlet and exhaust valves, they ensure that the valves open on time and more importantly close properly. If the tappet happened to be badly adjusted and did not let the valve close properly then damage to the valve and cylinder head can happen by burning.
If you have a significant power loss I would be surprised to find that the just tappets/valves were to blame.

Jan 26, 2014 | Cars & Trucks

1 Answer

What is tappet settings


Hydraulic tappets are tappets that contain a small hydraulic piston, pressurised by the engine's lubricating oil supply.[5] Although the piston does not move appreciably or frequently, it acts as a hydraulic spring that automatically adjusts the tappet clearance according to the oil pressure. This makes the valve actuation self-adjusting and there is no need to adjust the rockers. Hydraulic tappets depend on a supply of clean oil at the appropriate pressure. When starting a cold engine, with low oil pressure, hydraulic tappets are often noisy for a few seconds, until they position themselves correctly.


Parts For Porsche Panamera

Jun 15, 2012 | Cars & Trucks

1 Answer

I need the tappet setting code for a 1995 ford econovan.tappets are noisy.


There's NO code for noisy lifters. Depending on miles and previous maintenance (oil changes, etc) your lofters are probably worn. They need to be replaced and you might have an oil pressure test done to make sure there's is adequate oil pressure.

Mar 19, 2011 | Ford Econoline Cars & Trucks

1 Answer

What are the tappet settings 92 wa ford festiva?


The tappets on this car are hydraulic and do not require setting, however, if they are noisy try cleaning the hydraulic adjusters with penetrating oil or kerosene so see if that will free them. If that does not work, they will have to be replaced.

Mar 13, 2011 | Ford Festiva Cars & Trucks

1 Answer

An intermitant noisy tappet ????????????? Tappets seem unadjustable.


you have hydraulic tappets,they are not adjustable,use engine flush every 20k oil change,(leave in system for 30 mins with engine running) then before you drain, blip the gas upto 3500 revs several times to clear the oilways of sludge.

May 12, 2010 | Ford Festiva Cars & Trucks

1 Answer

Noisey tappets


Don't bother. They are hydraulic and rely on oil pressure to obtain a zero clearance when everything is OK. Your oil system may be sludgy or you may be using the incorrect viscosity oil.

Oct 03, 2009 | 2000 Suzuki Grand Vitara

1 Answer

Knocking from engine and brake failure due to eac failure


form engine knocking is due to the TAPPETS lose....
u have to tight the tappet...tappet work is very ard work if any tappet is very tight and other is lose ur engine power is low and after some distance ur engine is seased...

Aug 21, 2009 | 2004 Ford Fusion

2 Answers

Oil leak/tacuma auto 2001


put it up in the air and have a good look around ,most likely is a connection ??

Jul 30, 2009 | 2001 Daewoo Lanos

Not finding what you are looking for?
2000 Daewoo Lanos Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...