Question about 2006 Pontiac Grand Prix

Open Question

How to aim or adjust headlights on a 2006 Pontiac grand am

How do I adjuast and aim the headlights

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2006 Pontiac G6-GTP How do I adjust the headlights.

to raise you headlights there is a small brass allen screw located above each headlight under the hood. to raise your headlights turn clockwise until they reach the desired level.

Posted on Oct 23, 2008

proJekttaLon
  • 91 Answers

SOURCE: 2004 grand am headlight problem

Here's a link I found to a thread on GAOwnersClub.com. Hope This helps. Let me know if I can be of any more assistance.

Posted on Nov 29, 2008

  • 36 Answers

SOURCE: headlights need adjusting

The headlights will have small rods or adjusting screws located near the headlight mounting points. Will probably need a torx socket or screwdriver to adjust. Torx is a 6 point type screw.

Posted on Mar 11, 2009

  • 1 Answer

SOURCE: 2006 Pontiac Grand Prix all lights work but not the headlights

its your relay

Posted on Sep 02, 2009

  • 26 Answers

SOURCE: my dim headlights will go off while driving down

Change them

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Pontiac Montana sv6. How do I aim headlights?


PARK THE CAR IN A GARAGE. DRAW A LINE FACING THE CAR. OPEN THE HOOD, TURN THE LIGHTS 'ON', THERE ARE ADJUSTING SCREWS AROUND THE LIGHT HOUSING TO RAISE OR EVEN AIM THEM HORIZONTALLY.

May 15, 2015 | Pontiac Cars & Trucks

1 Answer

How do i adjust the headlights on 2006 pontiac torrent


Open hood on top of headlight housing look for small diameter hole. Couple of inches deep there is an adjustment screw. U can only adjust them up and down. U will find a u and d in front of that hole.1/4 inch hex head I believe.

Feb 15, 2015 | 2006 Pontiac Torrent

2 Answers

2008 Jeep Grand Cherokee has a headlight aiming problem - the low beams are aimed too high. I cannot find the vertical aiming adjustment screws to fix the problem. Can anyone tell me how to adjust the low...


Hi, i have no idea if this will help you or not, but, on the 1997 grand cherokee, if you look at the headlight itself, look to the outer edge, over the top ontop of the headlight there is a white allen key hole, not sure on the size, this, basically is the up and down adjuster for the headlight, sorry if it doesn't help but i've just had to adjust mine, and thats where it is, the one towards the radiator is the in and out, it pushes or pulls the headlight offcentre

Nov 26, 2009 | 2005 Jeep Grand Cherokee

2 Answers

How to adjust headlights-2002 Grand Prix


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 26, 2009 | 2002 Pontiac Grand Prix

2 Answers

I need to know the hight ,,when adjusting the


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 11, 2009 | 2001 Pontiac Grand Prix

1 Answer

Adjust a headlight 2005 grand prix


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 07, 2009 | 2005 Pontiac Grand Prix

1 Answer

Adjusting projector headlights for 2001 grand prix


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Mar 12, 2009 | 2001 Pontiac Grand Prix

1 Answer

2004 grand am headlight problem


Here's a link I found to a thread on GAOwnersClub.com. Hope This helps. Let me know if I can be of any more assistance.

Nov 29, 2008 | 2004 Pontiac Grand Am

Not finding what you are looking for?
2006 Pontiac Grand Prix Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...