Question about Cars & Trucks

Open Question

Need a wiring diagram for ransomes 213d highway

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Both park lights and tail lights are staying on. Headlights go on and off as should. All is working as should just park and tail lights will not shut off. 2000 Ford escort zx2

If it is a CANbus system it isn't the light switch, or any other switch, that performs the switching functions. The switches merely send a signal to a nearby black box where the request is digitised and coded and sent along the digital highway where another black box will receive and comply.

I suggest you check whether your car uses this system by looking at a wiring diagram. If it does there is not only some of the usual supply circuit and possible wiring problems to investigate but also software glitches and defective black boxes.

Jun 13, 2016 | Ford Cars & Trucks

1 Answer

Vacuum diagram for 98 dodge ram 1500 5.9 liter

The vacuum diagram is under the hood on the federal emission system sticker. We do not have it.

Oct 26, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

Runnigg/dash lights fuse blowing

Sounds like you have a short. You will need to get yourself a tester light specifically for shorts. Inatall that in place of the fuse and activate your dash/running lights and see if the tester light up if it does then a short is present. At that point you need a wiring diagram of said circuit and try and locate where the short is. If your not expierienced at this i advise seeing a reputable garage.

Feb 02, 2012 | Cars & Trucks

1 Answer

I need a fuse diagram for a 92' Oldsmobile 88 royale.. My park brake sensor keeps beeping, and the brake isn't even down.. Also, the park brake light is also on.. PLEASE HELP.. It BEEPS going up...

I don't think a fuse diagram is what you need.
If you get under the dash and look up at the parking brake pedal assembly you might see a switch with one wire. Its a simple piece of metal that is a ground and it gets pushed off its contact by a nub on the brake mechanism. That switch may have come loose and is cust a constant ground or a plastic pin on the back of the switch which keeps it from turning could have broke off and it moved out of posistion.

Aug 25, 2011 | 1992 Oldsmobile 88

2 Answers

I have a 2008 Aveo with 42,000 miles on it and going down the highway it will just stall. I pull over carefully and let it sit a moment then it will start fine. It may not do it again from an hour to maybe...

Hello: You have a wiring problem either in the fuse box under the drivers side dash or the fuse box under the hood, also where the wiring going to the engine control module.

Jan 17, 2011 | 2008 Chevrolet Aveo

1 Answer

Ignetion coil

Coil should be inside the cap on that one...Install instructions usually come with the new one (not difficult) Make sure you make yourself a wiring diagram for the plug wires before you begin and mark the wires so you can replace them correctly. When screwing coil to cap, make sure that the screws don't come through to the inside of the cap or it won't work. Before changing the coil, check spark at the plug wires. If it appears strong, likely you are changing the wrong part. Make sure the wires cap and rotor are in good condition as well.

Apr 10, 2009 | 1989 Oldsmobile Delta 88

1 Answer

Need link to 1998 isuzu rodeo relay/fuse diagram
HEre are two different links hope they work for you

Feb 21, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides