Question about 2002 Ford SVT Focus

4 Answers

Ford focus st170 clutch master cylinder

How do i changer my clutch master cylinder

Posted by on

  • EVERYTHINGJO Mar 07, 2009

    I HAVE A 2000 FORD FOCUS WITCH A CLUTCH PROBLEM IT WILL NOT GO IN GEAR WHEN I ENGAGUE THE PETTEL TO FLOOR COULD THIS BE THE CLUTCH MASTER CYL OR ANY OTHER IDEAS LOOKIN FOR HELP THANKYOU.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

To replace the clutch master, you must remove the under hood fuse box and air filter housing assm, then remove the hydraulic line that goes into the inlet port of the clutch master, then inside the car, remove the hush panel/knee bolster panel from under the steering column, and loosen the boilts that retain the brake pedal to the firewall, then remove the two 10mm bolts that secure the clutch master to the brake pedal assm. Reverse procedure ti install, then fill the brake master cylinder with clean fluid, loosen the bleeder screw at the top of the trans, and bleed the clutch as you would the regular brake system, but never pump the pedal, tighten screw, with foot off of clutch pedal open screw and press pedal to floor, then tighten screw before you release pedal, then release pedal loosen screw, etc. until no more air comes out, it may take quite a few times to fully bleed the system.

Posted on Feb 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Also, make sure that when you are taking off the switches on the pedal assembly, the stop light switch (Colored grey) goes counter clockwise to remove and clockwise to put on, while all other are clockwise to remove and counter-clockwise to put in. If you don't folllow that, the actuating rod may get stuck inside and the stop lights will always be on. Happened to me and had to buy a new switch.
I found a very detailed guide as well here
Good luck to all who do this, nothing you can break other than that stoplight switch if you are careful.

Posted on May 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

MY 2000 FORD FOCUS CLUTCH STOPED WORKING HOW DO I CHECK CLUTCH MASTER

Posted on Mar 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

How easy is it to remove and instal a complete clutch kit on a ford focus 1800 petrol t reg 1999 any help wud be gratefull thanx

Posted on Feb 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the break safety switch located in a 2009 Ford Fusion


Jeanette, break switch is above brake pedal arm, safety neutral switch is on transmission, clutch pedal safety switch above clutch pedal arm. Links below have pics.
to show your appreciation press the helpful button and follow me on fixya for more tips and info.

06 ford fusion brake light switch replace

How To Test and Replace the Neutral Safety Swtich Inhibitor Switch P0705

Clutch switch behind clutch pedal Ford Focus Forum Ford Focus ST Forum...

Replace master cylinder clutch Ford Focus Forum Ford Focus ST Forum Ford...

Feb 15, 2016 | 2009 Ford Fusion

1 Answer

Location of the clutch container on a ford focus


clutch master cylinder located on fire wall by brake master cylinder

Jul 11, 2015 | Ford Cars & Trucks

1 Answer

Have a 2002 ford focus clutch goes down all the way down


Need a clutch master slave cylinder,complete assy

A clutch assy won't last near 10 years either

Feb 01, 2013 | 2002 Ford Focus

1 Answer

Refitting clutch master cylinder ford focus, having difficulty aligning lugs on pedal side


disconnected pipes and clip, engaged two bolts through pedal box to master cylinder, carefully tighten bolts and draw lugs into line. tighten bolts equally, or potentially could damage mastercylinder.

Tom Pothecary

Oct 11, 2009 | 2001 Ford Focus

1 Answer

I am having problems compressing my rear caliper pistons on a 2003 ford focus 2.0 st170 how do i go about doing this?


Simple!

Use a large C-clamp and a piece of wood. Slowly tighten the c-clamp and it will compress the piston. Just remember, do this slowly so yopu don't have you master cylinder overflow.

Mar 21, 2009 | 2003 Ford Focus

1 Answer

How do I bleed the clutch master cylinder


Same as You Bleed Any other System Being carefull not to get air IN and IT sometimes TAKES FOREVER ________ STICK WITH IT ------ Took Me 2 hours One time

Jan 17, 2009 | 2001 Ford Focus

1 Answer

New clutch installed on my 2005 Ford Focus 4 weeks ago. Today difficulty getting into 3rd gear then all the gears affected and eventually stuck in reverse gear only. Pick up truck took car back to the...


Sounds like air has gotten into the hydraulic clutch system, or it is low on fluid from a failed master or slave hydraulic clutch cylinder or connecting line between the master and slave cylinders.

Aug 27, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2002 Ford SVT Focus Logo

4,623 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...