Question about 1989 Toyota 4Runner
Color code for wire diagram on computer on a 1989 toyota 4runner
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: audio wiring problem
Constant 12V+ Blue/Yellow
Switched 12V+ Gray
Ground Brown (or your own wire to a metal grounding point)
Antenna Trigger Black/Red
Front Speakers 4" Dash
Left Front (+) Pink
Left Front (-) Purple
Right Front (+) Green
Right Front (-) Blue
Rear Speakers 5 1/4" Rear Deck
Left Rear (+) Black
Left Rear (-) Yellow
Right Rear (+) Red
Right Rear (-) White
I a '83 camry, there are 2 seperate plugs that go into a factory radio.
One for Power/and front speakers, and the other for rear speakers.
Sounds as if you are missing part of the harness for the rear speakers (or it is shoved in the back of the dash unused by the previous install). If there is not an un-cut plug in the dash - your only course of action would be to run your own set of speaker wire to the rear.
See this picture... these are the plugs that should go into your factory radio....
Metra kit 71-1938 will go from your factory wiring directly into your factory radio.
Thanks for using FixYa - a FixYa rating is appreciated for my effort in answering this Freebie question.
Posted on Feb 25, 2009
SOURCE: belt diagram 950toyota 4runner
Go to the autozone website at autozone.com and register your vehicle. It is free and will give you access to an online repair manual. The belt routing for your vehicle can be found there. Hope this helped and best wishes.
Posted on Aug 05, 2009
simple really 12mm wrench an socket and 14 mm wrench an socket. lossen alt bracket 14mm then tesioner 12mm slide back drop belt and reverse. unless condensioner belt in way then dro 12 mm bolts on shiled then back off 12mm bolts on condensioner pulley remove belt follow previous instructions
Posted on Nov 25, 2009
Tips for a great answer:
Jun 05, 2015 | 2003 Toyota 4Runner
Feb 11, 2015 | 2001 Toyota 4Runner
Jan 26, 2014 | Toyota Cars & Trucks
Sep 26, 2011 | 1986 Toyota Pickup 4WD
Aug 20, 2011 | 1994 Toyota 4Runner
Feb 18, 2010 | 1990 Toyota 4Runner
Nov 24, 2009 | 1989 Toyota 4Runner
Oct 12, 2009 | 1989 Toyota 4Runner
May 02, 2009 | 1989 Toyota 4Runner
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: