Question about 1992 Chevrolet S-10 Blazer

1 Answer

Replace side marker bulb

I have a 1992 chevy S10 Blazer. And want to replace the side marker bulb in it. Can you send me instruction on how to do this?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same vehicle and just went through this. The best way to get to those side marker bulbs is to loosen or remove the front grille. There are several screws to remove this grille. I removed the top screws (hood opened you'll see them) and simply loosened the lower and center section screws. This enables you to pull the grille out far enough from the main headlight area, where you can then access the side marker bulb outlet.

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can i replace the fuel pump in my chevy 2000 S10 blazer with one from 1985 S10 blazer?


no, they are different pressure. it has to come from one with central fuel injection, like maybe 94 and up. also, the sending units even then

Jun 09, 2014 | Chevrolet S 10 Cars & Trucks

1 Answer

Both bulbs on my 2002 S10 Blazer licence plate was burned out I replased them with new bulbs and they will not come on and I have checked the fuses what could be the problem?


you need to check for power and for ground at the lightbulb socket to determine which is not contributing to power the bulb(s). If the marker lights work at the rear then suspect a broken/melted light bulb socket, broken wire, or broken/rusted ground connection. Again, check at the light bulb socket for ground on one side (black wire) and 12V (brown wire) on the other. The light socket should have terminals that actually touch the light bulb; sometimes the sockets will melt not allowing a good connection. a cheap harbor freight multimeter (VOM) will help. Right and left side use separate fuses

Jan 13, 2012 | 2002 Chevrolet Blazer

1 Answer

1991 chevy s10 blazer ecm


did yo see the retaining bolt left side under steering wheel
cant send you a pic if it not there,try the right side kick panel.

Nov 12, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

Where is the fuel pump fuse on a chevy s10 blazer?


Its in side the gas tank On the top of it You have to drop the tank to replace it Make sure it;s the pump first because its not easy to do And you probley will need other parts in addition to the pump to repair this TANK STRAPS FUEL LINES AND THE TANK IT SELF MAY NEED REPAIRS DO TO HOLES RUSTED IN THE TOP OF IT

Oct 29, 2010 | 1992 Chevrolet S-10 Blazer

1 Answer

Installing a blower motor in a 98 Chevy Blazer


96 chevy S10 p/u truck 4cyl 2.2 liter
shift solenoid electrical problem

Oct 01, 2009 | 1998 Chevrolet Blazer

1 Answer

Side marker bulb


i found on the three previous s 10's that i owned it can either be reached from the under neith side or i think it is easier to pull the grill

Jan 25, 2009 | 1992 Chevrolet S-10

1 Answer

I have a blown bulb in my side marker on a 1992


go ahead and change it. Just go to the part store, tell them that your side marker bulb is blown and they will sell you a new on. Then get your screw driver and go to town.

tepfy

Jan 25, 2009 | 1992 Chevrolet S-10 Blazer

4 Answers

1998 Chevy S10 pickup backup lights don't work


Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Sep 06, 2008 | 1991 Chevrolet S-10 Blazer

2 Answers

1991 Chevy Blazer S10 window motor installation


http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.

Aug 08, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1992 Chevrolet S-10 Blazer Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...