Question about 2001 Honda Accord
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Further clarification on the O2 sensor location: It is in the exhaust pipe, under the center of the car, on top of the pipe, just aft of the oil filter.
Posted on Jul 14, 2008
you should have it checked at a dealer ...that means that your supplemental restraint system is not active that is your airbags....!!!!!!
Posted on Mar 11, 2009
it has a problem with the second gear drum it cracks and does not fully engauge the n shifts to 3rd ..many honda owners also learn the 8 bucks a quart is the only fluid to pour in a honda..but remember 3 qaurts per drain and fill the tranny holds 7q ....it will take a case to do a drain flush...a high pressure flush will ruin a automatic tranny with alot of miles or metal deposits floating around inside..DRAIN AND FILL 3 QUARTS AT A TIME NO GASKET NEEDED ITS BUILT AND DESIGNED LIKE A MANUAL TRANNY
Posted on May 07, 2009
it should be located in the rear valve couver pushed into a rubber gromet with a hose running from it to the intake tube going to air box if not there then in the front valve couver same deal with a gromet and a hose running to the intake tube going to the air box. thats were 90 percent of ur pcv valves are located on most car trucks and suv's. im not real fimilyer with the 3.0 honda moter but i hope this helps
Posted on Aug 01, 2009
the blower motor is located behind and under the glove box. its held to the blower housing by three screws. remove the three screws and the motor will slide down and towards you. to test the motor. apply power to the yelllow/black wire and ground to the blue/red wire. the motor should run. if not you prob have a faulty power resistor.
Posted on Mar 17, 2010
Tips for a great answer:
Oct 18, 2016 | 2001 Honda Accord 3.0 EX
Aug 25, 2012 | 1997 Honda Accord
Apr 20, 2012 | 2009 Honda Accord EX
Oct 19, 2011 | 1997 Honda Accord
Nov 12, 2010 | 1998 Honda Accord
May 18, 2010 | 1991 Honda Accord
Mar 07, 2010 | 1998 Honda Accord
Jul 15, 2009 | 1991 Honda Accord
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: