Question about 2004 Chrysler Sebring

1 Answer

Front turn signal

I can't figure out how to get to the front turn signal to change the bulb. any idea how i get to it

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

The light assembly has to come out. there are two bolts 10mm. heads on top but after you take the bolts out pull light forward the bottom plastic on your bumper will get in the way carefully!! push down the plastic this will not be fun because the tollerance is to close.but with the lense in your hand you will get right to it.

Posted on Jan 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My right turn signal is not working i changed the bulbs and checked the fuse why is it not still working

What is year--make--model?
Neither the front or rear right turn work? If that is correct, I'd check the turn signal switch and wiring circuit.

Mar 16, 2016 | Cars & Trucks

1 Answer

Turn signals not working properly

replace flasher, under your dash, its a round, metal cap shaped unit , try that, also, change your rear bulbs, sometimes the ones that work are the problem, check your fuses also !

Mar 25, 2013 | 1998 Dodge Durango

1 Answer

Front turn signal bulb change

There is a "trap door" underneath. Two bolts and it opens.

Jul 17, 2010 | 1999 Chevrolet Camaro

1 Answer

How do you change a front signal bulb on a 2004 accord

Front turn signal bulb replacement

1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.

Apr 12, 2010 | 2004 Honda Accord

1 Answer

How do you change turn signal bulb on an 88 comanche. cant figure out how to get too it.

which turn signal the front or back if its the back try looking fdor a apartment and stick your hand back towards your lights this should take you right to it, if front then try un screwing the big black nut on top of the signal this should open both the headlight and turn signal. :)

Mar 23, 2010 | 1988 Jeep Comanche

1 Answer

How do you change the front turn signal

Signal and Marker Lights - REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
(see Figures 1, 2, 3, 4 and 5)


Fig. 1: Remove the retaining bolts for the splash shield and ...


Fig. 2: ... remove the splash shield from the vehicle


Fig. 3: Twist the bulb socket to remove it from the lamp and ...


Fig. 4: ...lower the socket down to access the bulb


Fig. 5: Pull the bulb straight out to remove it from the socket
  1. Remove the inner wheel well splash shield.
  2. Grasp the bulb socket and rotate it counter-clockwise to remove it from the lamp.
  3. Remove the bulb from the socket.
  4. Installation is the reverse of removal.

Hope helped with this (remember rated and commented this help).

Mar 01, 2010 | 1996 Chevrolet Cavalier

1 Answer

Headlight drivers side turn signal out

Change it again.....most likely is just a bad bulb.

Sep 01, 2009 | 2005 Chevrolet Cobalt

2 Answers

98 Sebring JXI turn signals work right/left and

Change the flasher which is located up by fuse block under dash

Jul 29, 2009 | Chrysler Sebring Cars & Trucks

1 Answer

Front turn signal 1990 Buick Century

Hi Angela, what you need to do is look under the hood and basically locate the backside of the light that your wanting to change the bulb in. You'll see a wiring harness going to that area. Give the plug a twist and pull the old bulb out.

Jun 13, 2008 | 1990 Buick Century

Not finding what you are looking for?
2004 Chrysler Sebring Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides