Question about 2011 Chevrolet Silverado 1500

Open Question

One side of rear bumper is slightly pushed in from someone tapping into it. Can it be loosened and adjusted?

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to adjust clutch on 2003 gmc sonoma

clutch cable under drivers side, have someone push on the clutch while you are underneath and you should be able to see it move slightly. either tighten or loosen the bolt to your desired clutch play

Nov 30, 2016 | GMC Sonoma Cars & Trucks

1 Answer

A guy rear-ended my 1989 Chev Silverado and knocked the rear bumper down a little bit. Can the bumper be easily adjusted back to its original position?

Well usually a factory installed bumper has no adjusting slots. Some aftermarket bumpers do so they can fit different models.
I guess you could try it if the brackets are not bent.

Jul 02, 2012 | 1989 Chevrolet Silverado 2500

1 Answer

Which way do I work the brake spoon to loosen the left rear drum brake?

Which ever way is hard to turn that's the way, get a flash light and look in there, there will be a tap that needs to be push away from adjuster, with a small screw driver, while holding tap now turn adjuster to loosen brakes

Jun 26, 2010 | 1982 Ford F 250

2 Answers

Need to know if there is adjustments on the rear bumper on my 1996 ford pickup. Bumper is angled up way to much.

there are 4 bolts, just loosen them slightly, and adjust bumper, then re tighten, you dont want them LOOSE, just snug, so you can move it in small increments. make sure tail gate does not contact bumper when open.

Oct 22, 2009 | 1996 Ford F150 Regular Cab

1 Answer

How can I repair my sagging rear bumper on my 2005

go to a friend or a bodyshop. get a bumper adjuster. it has a 3 to 4 foot handle on it, with a hook on the other end. you can easly bend a bumper where you want it...

Aug 05, 2009 | 2005 Mazda Tribute

1 Answer

How do you replace rear bumper cover on 2009 Honda Civic

Should look for the bumper shocks and remove which ever is easiest, remove bumper then remove cover , replace cover and reinstall bumper, watch out for wires and clips might hold cover to side plastic.

May 24, 2017 | 2009 Honda Civic

1 Answer

1991 xj6 4L Vanden Plas body parts

yes they are interchangible except the front spoiler is different, but everything else is the same. (the front lower spoiler on the 93 has built in fog lamps)
Pretty easy repair and I could only hope his car is the same color....


Oct 13, 2008 | 1991 Jaguar XJ6

2 Answers

Removing rear bumper on Audi A4 1997 to fit tow bar

Did you get the solution to this, I have the same problem

Jul 07, 2008 | 1997 Audi A4

Not finding what you are looking for?
2011 Chevrolet Silverado 1500 Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides