Question about 1997 Chevrolet K1500

1 Answer

I need to locate the wiring schematic for a 95 chevy K1500. Specifically for the 4X4 actuator on the front axle. I need a wiring diagram for the 4 wheel drive system

Posted by on

  • Anonymous Mar 12, 2014

    need a schematic for a front drive axle on a 2000 silverado

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Call Gm They can fax over a copy to you or oick one up /call the parts department its free

Posted on Jan 25, 2009

  • Marc Podeszek Jan 27, 2009

    Please rate my response. Thank you !

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change 4x4 actuators on a 1995 chevy k1500 truck. I've located 1 out of 2 actuators but the second one appears to be in the transfer case maybe? HELP


I had this problem in the middle of nowhere. On the passenger side of the front differential, there is a "thermal Actuator" that screws into the diff. This is what engages the front axle. I replaced mine and 4 wheel works again. Don't know about a second. Be sure to remove the wire connector before removal or your wiring connector.
Leonard Jones
El Mirage, Arizona

May 01, 2011 | 1995 Chevrolet K1500

1 Answer

I got a 96 chevy 4x4 and my front wheels aren't pulling. i replaced the acuator and still nothing. everything sounds like it is engaging but no turning of the front wheels. do 96 models have auto locking...


96 chevys have a ifs (independent front suspension) this give it more ground clearance but does not have lock out hubs, the cv axles go into the front differential an spin freely until you put it in 4wd, how this works is your transfercase spins the drive shaft that goes into the front differential an while you put it in 4wd it sends power to the actuator to lock the front differential. if your front end isnt pulling you either popped your 1 of your cv axles but if you did this you would know because it makes a very loud thunking noise while you're driving, my guess is you have a short thats not sending power to the actuator. check to see if the wiring harnesses are connected and check if the fuse that operates the 4wd in the cab of the truck is not blown. also actuators for these trucks are horrible they go out alot

Feb 11, 2011 | 1986 Chevrolet K1500

1 Answer

I have a 93 chevy z71. I can't get the auto locking hubs to lock. My transfer chase works. But when i try to shift it into 4hi or 4low the 4x4 fuse in the fuse box will blow


The actuator down on the front axle is probably stuck, or shorted internally. You can prove this by unplugging the actuator (it's down by the diff. on the front axle) then try a new fuse and see if it still blows, there is a short in the wiring, if not it is the actuator causing the short.

Jan 19, 2011 | 1993 Chevrolet K1500

1 Answer

4 wheel drive dont work you can hear it lock in but dont get anything out of tha front chevy 1995 z71 silverdo


Check your wire harness to your front axle actuator. The front actuator is electrical and common for the wire harness or the actuator it self will go bad and will need to be replaced. You can pick up a new actuator at Napa and GM has a new updated front axle actuator which is more reliable then the oil one that is used in your K1500. http://www.4x4posi-lok.com/PDFs/TSG_chevyK.pdf

Mar 04, 2010 | 1995 Chevrolet K1500

1 Answer

My 4x4 will not i engage on my 1995 chevy k1500


check the front actuator its behind the front diff

Jan 22, 2010 | 1995 Chevrolet K1500

1 Answer

Front diff does not engage on my 95 chevy k1500 4x4 .the actuator is new.what do i do?


first make sure the new actuator is gettin' power. Do this by placing your hand on it while someone engages the 4-wheel drive. Then try cleaning your vacuum actuator valve and vaccuum lines leading up to it for possible holes.

Sep 13, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1993 chevy 1500 4x4 pickup no power to front actuator


check all wire conections also replace the actuator on the front axle but check for power there first if you have power replace that switch as well .

Aug 19, 2009 | 1993 Chevrolet K1500

1 Answer

4wd not engaging


Is it a two wire actuator or a three wire actuator? The two wire ones are pretty unreliable. that is why Chevrolet converter them to the three wire. Check for power and ground on the two wire in 4wd. For the three is should have one ground wire, one wire that is hot in 4wd, and one wire that is hot in 2wd.

Jan 29, 2009 | 1995 Chevrolet K1500

2 Answers

My chevy k1500 4x4 problem


http://www.automotiveforums.com/t173603.html

It is called a thermostatic actuator; you can purchase one at most auto part stores or at the dealership. I have also seen a manual cable replacement kit that bypasses the thermostatic unit.

Nov 21, 2008 | 1992 Chevrolet C1500

Not finding what you are looking for?
1997 Chevrolet K1500 Logo

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...