SOURCE: Transmiision for 1994 Chevrolet s10 blazer
if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.
SOURCE: how to change front main oil seal on 2001 chevy 8.1
you will need a puller to remove the front crank pulley/ balancer. then its a matter of prying the seal out.
SOURCE: how to replace rear main seal on 1994 chevy 5.7
i have no product knowledge here of this vehicle but 2 part asbestos type seals went out with the ark so i would imagine this is a rubber seal and easy to change ,after the gearbox has been removed ---- the hard part
SOURCE: I was told I have
Well sometimes.... the front crankshaft seal is usually called a crank seal, or the front timing cover seal but the rear crank seal is (usually) called the Rear Main crank seal. In order to replace the rear seal , the transmission will need to be removed. If its the front, then the harmonic balancer will be removed. $380 sounds cheap. As you will need a oil seal, oil pan gasket, oil, filter, labor and tax. Maybe even a lower engine mount.
Testimonial: "Thank you sooo much!! This mechanic has been in business for 45 years and has been the president of an antique car club for many years..."
52 views
Usually answered in minutes!
×