Question about Cadillac Escalade EXT

Open Question

2002 cadillac escalade ext EBTCM part

The auto repair department said I need an Electronic Brake Traction Control Module for my auto. How much is this part and where can you locate this part?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

STEVIE_N_24
  • 147 Answers

SOURCE: engine light came on then security light also

Recommend to have codes pulled via scan tool. Lights can come on for many different things. Possible bad ignition switch assembly can cause both check engine light and security light to come on.

Posted on Mar 29, 2009

  • 113 Answers

SOURCE: 2001 cadillac catera ebtcm removal how to

You need to remove the upper rad hose and the battery.
Then, use a torx to remove the 6 screws (hard to get at) which will remove the EBTCM from the brake modulator. You also must disconnect the two electrical connectors (the big one has a slide tab).
There are places you can send the module to and rebuild with warranty. I took a module from a 99' and installed it in my wife's 01'. Now the speedo, odometer, cruise and power steering work perfect and no TCM / ABS light.

Posted on Aug 18, 2009

  • 113 Answers

SOURCE: Dealer diagnosed the problem as the EBTCM and Oxygen sensor

You can get the module rebuilt for about $150.
Check online, there are places in the US which gaurantee it as well. Send the old module and you get it back real quick.

If the module is dead, you lose speedo, TC/ABS, cruise and the variable power steering assist.

Posted on Oct 06, 2009

  • 113 Answers

SOURCE: Where do i find the etcbm Electronic Traction

mounted on the ABS brake pump, facing the battery, right below the rad hose.

Posted on Aug 10, 2010

  • 1608 Answers

SOURCE: Had brake hose and electronic

I am not sure why the brake control module was replaced but it is located in the engine compartment on the right front fender.You will have to jack the vehicle up to get to it.Just follow the brake lines.The module has to be programmed after replacement.Also the brake pedal position sensor has to be calibrated.This has to be done at the dealership.The first thing you should do is get the codes and let me know what the code is.I can get back to you and let you know what the next step you should take.Just because the light is on does not mean you have to replace the electronic control module.That is why it is important to get the codes first.Hope this helps.Good luck.

Posted on Nov 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to restore 1st gear lockout from abs/trac. module acting up w/o replacing the very poorly designed unit that has been proven to cause worse braking/traction than an experienced driver can perform.


hi. does this sound familiar.

Anti Lock Brake System (ABS) problem. Has trouble code C1243.

1. Pin test power and ground to the Electronic Brake Traction Control Module (EBTCM).

2. Stress test the power and ground by using a high beam headlight or blower motor to put a load on the system.

3. If power and ground are OK, remove the EBTCM and hot wire the pump motor. If it runs OK and is quite, replace the EBTCM. If the motor is noisy replace both the Motor and the EBTCM.

2000 Cadillac Eldorado, ETC 4.6L, V8, VIN 9, USA *
Brake Pressure Modulator Valve (BPMV) - BRAKE PRESSURE MODULATOR VALVE WAS NEEDED

Jun 11, 2014 | 1999 Cadillac Eldorado

1 Answer

What is traction control on cadillac ecalade


traction control control wheel spin it should be on unless you get stuck then you can turn it off and it will give power to the wheel that needs it.

Jun 08, 2014 | 2002 Cadillac Escalade Ext

1 Answer

Speedo not working cad catera


probably need 2 replace the EBTCM, electronic brake traction control module, it will also make your ABS and TC lights come on,

Nov 08, 2011 | 1999 Cadillac Catera

1 Answer

What does it mean when 1999 Ford Explorer ABS warning light on dashboard comes on?


That means that the EBTCM has detected a problem within the system.The message indicates that a malfunction exists in the stability enhancement feature.

EBTCM (Electronic Brake and Traction Control Module) is an electronic control module that controls and operates the Anti-Lock brake system, Traction Control System and Stability system. If this module detects a problem, it "asks" the cluster to inform you by displaying a warning message.


You should have your car scanned for trouble codes with a scan tool, the Tech2 scan tool is preferred because other scan tools may not communicate with the EBTCM modules.

Hope helps (remember to rate this answer).

Jun 02, 2011 | 1999 Ford Explorer

2 Answers

What does ebcm/ebtcm mean


An Electronic Brake Control Module, or EBCM, monitors the rotation speed of each wheel. The EBCM decreases the braking force to a wheel when it detects that the wheel is rotating more slowly than the other wheels. Additional details for GM vehicles in this link: absfixer.com/how_do_i_remove.

EBTCM is the Electronic Brake Traction Control Module device.

Good luck.

May 10, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

I have a 2003 cadillac escalade ext and the check brake system light came on. The ABS and traction light are also on. What could be the problem?


The most likely problem is a wheel motion sensor. If your check brake light is on, you have a problem that needs immediate attention. Refer to your owners manual to see if your Escalade is still safe to drive.

Feb 28, 2011 | 2003 Cadillac Escalade Ext

1 Answer

C1243 - BPMV Pump Motor Stalled1999 cadillac deville


BPMV = Brake Pressure Modulator Valve.

Part of the anti-lock brakes and traction control system.
The BPMV is located at the left hand front corner of the engine compartment, attached to the EBTCM (electronic brake control module).

CAUTION: For safety reasons, the brake pressure modulator valve assembly must not be repaired, the complete unit must be replaced. With the exception of the EBTCM ,no screws on the brake pressure modulator valve assembly may be loosened. If screws are loosened, it will not be possible to get the brake circuits leak-tight and personal injury may result.

Sep 24, 2009 | 1999 Cadillac DeVille

2 Answers

Dealer diagnosed the problem as the EBTCM and Oxygen sensor


Electronic Brake control Module controls odo, speedo, if not working also the TCS, ABS, check engine lights come on and power steering is affected. New $2000, I got mine used for $170 or you can re build at modulemasters.com

Jun 24, 2009 | 2001 Cadillac Catera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...