Question about Kia Rio
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1996 BUICK REGAL DINGING NOISE
the dinging is from having the turn signal on to long it s a warning I know that sounds strange, mine did the same thing happen to me i made a turn but the turn signal didnt shut off couple mins. later i hear ding ding ding looked at dash turn signal was on shut it off it quit dinging. hope this helps
Posted on Dec 08, 2008
I had the same problem in my 98 and 96 Sables. Ford dealer says it is a problem with a sensor, located behind the left rear quarter panel. It doesn't recognize when the doors are closed, therefore it leaves the dome light, etc. on--sometimes briefly, but possibly until the battery goes dead. Worse when the weather is damp. Their solution was to throw it on the diagnostic computer BUT ONLY WHILE THE PROBLEM IS ACTIVELY HAPPENING, then replace the sensor--they quoted me a minimum of $300. I leave the cover off the dome light, and pull the bulb when necessary.
Posted on Apr 08, 2009
this is a common issue with these. The door for some reason goes out of alignment and you will have to either adjust the striker or the door track or take it somewhere and have them do it.Its better to have someone else do it so they have to fix it right if they want paid..
Posted on Jun 19, 2009
Tips for a great answer:
Mar 19, 2012 | 1997 Ford Windstar
Jul 16, 2017 | Hyundai Elantra Cars & Trucks
Sep 01, 2010 | Hyundai Elantra Cars & Trucks
Apr 03, 2010 | 1998 Ford Windstar
Feb 10, 2018 | 1998 Ford Windstar
Jan 31, 2009 | 2005 Chevrolet Trailblazer Ext
Jan 02, 2009 | 2003 GMC Sierra
Dec 08, 2008 | 1996 Buick Regal Olympic Gold
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: