Question about 2001 Honda Odyssey

1 Answer

Some times not engaged to dryshaft when TC on

09-1 c shaft speed sensor failure
26-1 3rd pressure switch failure
40-1 tc clutch system failure

Posted by on

  • David Melrose May 11, 2010

    I have a factory service manual and can fax you the troubleshooting procedures for each problem. But those codes don't match exactly the codes in my book. What I have is P0720 (9) Output shaft (countershaft) speed sensor. P0845 (26) 3rd clutch transmission pressure switch. P0740 (40) lock up control system. Post a fax number and I'll send.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Check the level and color of the transmission fluid. Sounds like a fluid pressure issue. If the fluid is red thats good but if the fluid is low and/or dark brown and smells burnt. That isn't good. You can try having the system flushed but don't get your hopes up because of the year of the minivan you might need a transmission.

Posted on Apr 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error codes 40 and 41 mean on my 1999 mitsubishi eclispe mean


11 Oxygen sensor fault.
12 Airflow sensor fault.
13 Intake air temp sensor fault.
14 Throttle position sensor (TPS) fault.
15 Idle speed control (ISC) motor position sensor fault.
21 Coolant temp sensor fault.
22 Crankshaft position (CKP) sesnor fault.
23 Camshaft position (CMP) sensor fault.
24 Vehicle speed sensor (VSS) fault.
25 Barometric (BARO) pressure sensor fault.
31 Knock sensor fault.
32 MAP sensor faulty.
36 Ignition timing adjustment signal fault.
39 Oxygen (O2) sensor fault.
41 Injector(s) fault
42 Fuel pump fault.
43 EGR fault.
44 Ignition coil (cylinders #1 & #4) fault.
52 Ignition coil (cylinders #2 & #5) fault.
53 Ignition coil (cylinders #3 & #6) fault.
55 Idle air control (IAC) valve position sensor fault.
59 Rear Oxygen (O2) sesnor fault.
61 Transaxle control module torque reduction signal fault.
62 Variable Induction control (VIC) valve position sensor fault.
71 Traction control (TC) vacuum valve solenoid fault.
72 Traction Control (TC) vent valve solenoid fault.

Sep 26, 2014 | 1999 Mitsubishi Eclipse

1 Answer

Engine code 894


DTC P0894 Transmission Component Slipping
DTC P0894Circuit Description with 4L80-E / 4L85-E Automatic Transmission The powertrain control module monitors the engine speed and the transmission output shaft speed. The PCM calculates turbine shaft speed and torque converter clutch (TCC) slip speed by using inputs from the automatic transmission input shaft speed sensor, automatic transmission output shaft speed sensor, and other transmission components. The forward clutch housing is used as the AT ISS rotor. Whenever the TCC is engaged, engine speed and turbine speed will closely match, indicating low TCC slip speed. In D3, with the TCC engaged, calculated transmission component slip can only occur in the torque converter. In D4 OVERDRIVE, with the TCC engaged, transmission component slip can occur in the TCC or the fourth clutch assembly. If the PCM detects an excessive TCC slip speed in D4 OVERDRIVE, when the TCC should be engaged, then DTC P0894 sets. DTC P0894 is a type C DTC. For California emissions vehicles, DTC P0894 is a type B DTC.DTC Descriptor This diagnostic procedure supports the following DTC: DTC No MAF sensor DTC P0101, P0102 or P0103. No MAP sensor DTC P0106, P0107 or P0108. No TP sensor DTC P0120 or P0220. No VSS DTC P0502 or P0503. No ISS DTC P0716 or P0717. No TCC Stuck Off DTC P0741. No TCC Stuck On DTC P0742. No 1-2 SS valve DTC P0751, P0752 or P0753. No 2-3 SS valve DTC P0756, P0757 or P0758. No TFP manual valve position switch DTC P1810. No TCC PWM solenoid valve DTC P2761. The throttle angle is 10-100 percent. Engine speed is 1,250-5,000 RPM. The TFT is Vehicle speed is TFP manual valve position switch indicates D4. The TCC is commanded ON for 0.04 second or greater. TCC is locked ON for greater than 0.1 second. Commanded The PCM detects slip in the torque converter clutch and/or the fourth gear clutch pack with the TCC in an apply or locked mode. DTC P0894 sets during the second consecutive trip when one of the following conditions occur: The TCC slip speed is 100-550 for 10 seconds for three occurrences.The TCC slip speed is 100-550 for 10 seconds, the PCM commands maximum line pressure. The TCC slip speed is 100-550 for 12.5 seconds, the PCM commands the TCC Off for 2 seconds. The TCC slip speed is 100-550 for 15 sec For California emission equipped vehicles, the PCM illuminates the malfunction indicator lamp during the second consecutive trip in which the Conditions for Setting the DTC are met. For Federal emission equipped vehicles, the MIL is not illuminated. The PCM commands maximum line pressure. The PCM inhibits the TCC engagement. The PCM freezes transmission adaptive functions. The PCM records the operating conditions when the Conditions for Setting the DTC are met. The PCM stores this information as Freeze Frame, California only, and Failure Records, California and Federal. The PCM stores the DTC P0894 in PCM history during the second consecutive trip, California, or the first trip, Federal, in which the Conditions for Setting the DTC are met. For California emissions, the PCM turns OFF the MIL during the third consecutive trip in which the diagnostic test runs and passes. A scan tool can clear the MIL/DTC. For California emissions, the PCM clears the DTC from PCM history if the vehicle completes 40 warm-up cycles without an emission related diagnostic fault occurring. For Federal emissions, the PCM clears the DTC from PCM history if the vehicle completes 40 warm-up cycles without a non-emission related diagnostic fault occurring. The PCM cancels the DTC default actions when the fault no longer exists and the ignition switch is OFF long enough in order to power down the PCM. A TFP manual valve position switch malfunction can set DTC P0894. A mechanical failure of the shift solenoids or TCC PWM solenoid valve can set DTC P0894. Internal transmission failures can result in a DTC P0894. Sticking or contaminated shift valves may cause intermittent slipping in D4. DTC P0894 defaults to an elevated line pressure condition which may result in partial TCC apply. This may produce an idle surge that could stall the engine. The numbers below refer to the step numbers on the diagnostic table. 3. This step tests the indicated range signal to the actual selected range. A faulty TFP manual valve position switch can set a DTC P0894. 4. This step tests for excessive TCC slip speed while in a commanded TCC lock-up state and in fourth gear; and confirms that the fault is present. 5. This step tests for excessive TCC slip speed while in a commanded TCC lock-up state and in third gear. 6. This step tests for a sticking TCC shift valve. 7. This step tests for proper transmission line pressure.

Apr 18, 2014 | 2005 GMC Sierra 2500HD 4WD

2 Answers

Torque converter clutch solenoid on a 1999 Saturn SL2. Which and where is it located?


This won't be a fun job. Notice this guy stated he took him about 5 hours and I think he is pretty knowledgeable. So if you are a novice auto mechanic you might want to hire this done for you.

Oct 16, 2013 | 1998 Jeep Wrangler

2 Answers

Trac light is comin on what does this mean


The car is OK. If you have the traction control (TC) warning pop up it means there is a fault in the traction control system . The traction control on the car will now be disabled.

The most likley cause is a failed or faulty wheel sensor. These are the sensors which detect if a wheel is losing traction and the TC system will apply braking multiple times to slow the wheel speed to retain grip.

It is a good safety feature but you can still drive your car around without the TC system operating. There should be a TC switch on your model to turn the TC on and off manually. When switched off manually, a TC off message should pop up on the dash.

Dec 25, 2012 | 2000 Chevrolet Cavalier

1 Answer

For My 2001 Ford Taurus How Do I Get The Torque Coverter Clutch System Out Of Off Position


P1744 is tc performance. Need new tc or try changing speed sensor.

Feb 15, 2012 | 2001 Ford Taurus

1 Answer

Two cods on my 2005 scion tc , po717 and po793 what is the solution to these cods.


P0717 SCION - Turbine Speed Sensor Circuit No Signal.
P0793 SCION - Intermediate Shaft Speed Sensor A.

Jan 14, 2011 | 2005 Scion tC

1 Answer

What does it mean when ur tc light is on in a chevy cobalt 05


tc stands for traction control and usually means that something in the system is not in order, say like a wheel speed sensor. However, if the abs light goes on at the same time, it's usually a wheel speed sensor somewhere.

This could be a module or a wire to the wheel speed sensor on the tc side.

Get an ABS Brakescan Tool, like an Actron OBD-II ABS Brakescan tool to help to diagnose what is wrong.

They cost like $100 plus shipping on Amazon.com.

Nov 19, 2010 | 2003 Chevrolet Cobalt

1 Answer

Smoking Vehicle After servicing.


Ther first code ECM-6805 TURBOCHARGER (TC) CONTROL VALVE DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION If engine speed (RPM) is above 3500 rpm and the engine is operating at a high load, and if the boost pressure (from the boost pressure sensor) is higher than a designated value, which at maximum boost pressure is approximately 20kPa (2.9psi) above normal boost pressure, this is interpreted as a fault and diagnostic trouble code (DTC) ECM-6805 is stored. Condition reduced boost pressure Possible source * hoses between turbocharger (TC) and turbocharger (TC) control valve respectively turbocharger (TC) control valve and pressure servo are loose or are blocked/damaged * faulty turbocharger (TC) control valve * faulty boost pressure control (BPC) valve pressure servo * sticking boost pressure control (BPC) valve Condition * none ECM-6805 TURBOCHARGER (TC) CONTROL VALVE PRESSURE TOO HIGH - PERMANENT/INTERMITTENT FAULT Checking the hoses and turbocharger (TC) control valve Check that the hoses between the intake manifold, pressure regulator and turbocharger (TC) control valve are not trapped, blocked or damaged. Check the turbocharger (TC) control valve by activating it. Check the alignment of the boost pressure control (BPC) valve pressure servo and the boost pressure control (BPC) valve and that they are functioning correctly and not sticking according to See: Component Tests and General Diagnostics\Boost Pressure Regulator, Checking/Adjusting Verification Hint: After carrying out the repair, check that the fault has been remedied. * Ignition off. * Reinstall connectors, components etc. * Disconnect the VCT 2000 from the data link connector (DLC). * Test drive the car and check that high boost pressure is obtained. * Connect the VCT 2000 to the data link connector (DLC). NOTE: Do not switch off the ignition before the VCT 2000 has been connected and the boost pressure has been tested with the smart tool. Read the boost pressure fault status When the boost pressure has been tested the display should show that the diagnostic is complete. the second code Symptoms You will likely not notice any serious drivability problems, although there may be symptoms. Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Then start with the cheapest, easiest repair procedures: Inspect for the following conditions: An incorrectly routed harness--Inspect the harness of the MAF sensor in order to verify that it is not routed too close to the following components: - The secondary ignition wires or coils - Any solenoids - Any relays - Any motors A low minimum air rate through the sensor bore may cause this DTC to set at idle or during deceleration. Inspect for any vacuum leaks downstream of the MAF sensor. A wide open throttle (WOT) acceleration from a stop should cause the MAF sensor g/s display on the scan tool to increase rapidly. This increase should be from 6-12 g/s at idle to 230 g/s or more at the time of the 1-2 shift. If the increase is not observed, inspect for a restriction in the induction system or the exhaust system. The barometric pressure (BARO) that is used in order to calculate the predicted MAF value is initially based on the MAP sensor at key ON. When the engine is running the MAP sensor value is continually updated near WOT. A skewed MAP sensor will cause the calculated MAF value to be inaccurate. The value shown for the MAP sensor display varies with the altitude. With the ignition ON and the engine OFF, 103 kPa is the approximate value near sea level. This value will decrease by approximately 3 kPa for every 305 meters (1,000 feet) of altitude. A high resistance on the ground circuit of the MAP sensor can cause this DTC to set. Any loss of vacuum to the MAP sensor can cause this DTC to set. the third code O2 sensor failure may not be displayed appropriatly

Jun 08, 2009 | 1997 Volkswagen Jetta

1 Answer

Transmission problem


Sounds like your transmission light is going out. When the TC light comes on thats your first warning that something is wrong. This happened to us on our 2001 Odyssey in 2007 and Honda replaced the transmission under the 7 year 100000 mile warranty.

Jan 30, 2009 | 2001 Honda Odyssey

Not finding what you are looking for?
2001 Honda Odyssey Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...