Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 17, 2013

How to replace reversing camera on my ix 35 hyundai

My reversing camera has water in it and needs replacing and i would like instructions on how to replace it.

2 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 14, 2012

SOURCE: Need instructions for replacing my window washer pump on my '06 hyundai sonata, please?

You'll need to remove the two retainers from the front portion of the right front fender liner. Then pull the front portion away from the bumper cover and fender to expose the washer pump. To remove the pump, simply unplug it and pull out of the washer bottle.

If you have less than 60,000 miles on the car, I'd recommend taking it to the dealer for warranty service

Ad

randymanfive

  • 501 Answers
  • Posted on May 08, 2015

SOURCE: How do I check the ATF level in my hyundai ix 35

Some of the newer cars have a closed system. You can't check it. It is maintenance-free!! Not sure of the year you have.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Hyundai IX 35 Jeep can shift gears & rev the engine but car won't move. Please help with possible cause.

If you can shift gears than you have a manual transmission. If you shift into any gear and the transmission acts as if it is in neutral. More than likely the car needs a new clutch. If there is anything else please write back.
0helpful
1answer

My Hyundai ix 35 is squealing through the speakers all the time

Hi there,

are you sure it's the speakers?

Get out when the car's on and make sure it's not coming from the engine.

it could be a dodgy belt.

good luck & have a great day! :)
0helpful
2answers

How do i replace a water pump on a 2002 hyundai accent gs dohc 16v?

THE WATER PUMP IS NORMALLY LOCATED AT THE FRONT OF THE ENGINE, DRIVEN BY A PULLEY.
0helpful
1answer

How do I check the ATF level in my hyundai ix 35

Some of the newer cars have a closed system. You can't check it. It is maintenance-free!! Not sure of the year you have.
0helpful
2answers

Set clock ix35

DOES THE DISPLAY LIGHT ON? NO....CHANGE THE CLOCK FUSE.
1helpful
1answer

Need the wiring diagram for BMW 2008 X6 35 IX

I need the pic of BMW X6 35 2008 turbo vaccum
1helpful
1answer

Instructions on how to replace drivers side

Open hood, reach behind headlight. If necessary remove battery and coolant overflow tank.
Then reach in behind headlight. There will be a plastic ring on back of headlight. Turn counter clockwise and pull back and slide back out of the way. Then grab the headlight bulb, turn counter-clockwise and pull back to remove. Then unclip the wire harness from the bulb itself and reverse procedure to replace.
2helpful
2answers

I need instructions on replacing the timing belt

1. Remove the Alternator Belt.
2. Remove the Water Pump Pulley
3. Remove the Air Conditioner Belt and Power Steering Belt.
4. Remove the Crankshaft Pulley.
5. Remove the timing belt cover
6. Remove the timing belt tensioner pulley.
7. Remove the Timing Belt.
8. (If Replacing) Remove Idler Pulley.
Installation is reverse of removal. Keep a close eye on the timing marks on the cam sprockets to make sure you don't knock anything out of whack.

I would strongly recommend replacing the water pump while you are replacing the timing belt. (The water pump usually comes in the timing belt kit.) Otherwise you are going to have to do this all over again when your water pump goes out. Good Luck.
Not finding what you are looking for?

95 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...