Question about Cars & Trucks

Open Question

How do I reset yellow spanner symbol on insignia

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: spanner symbol on dash, and pinging when turning ign on

try; 1. Switch off the engine and turn off the key 2. Turn the key on second level just before cranking and press M button twice 3. Within 10 sec, turn key off 4. press and hold the M button 5. Swith on the key and keep holding M button 6. Wait until hear buzz sound 7. release the buttin

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Combo 17 CTDI. Why does spanner light come on now and again but after a rest will stay off?


This is a maintenance required symbol. Like oil change. Call a local parts store or garage, they should be able to tell you how to reset the light.

Dec 29, 2015 | Vauxhall Cars & Trucks

1 Answer

What does the spanner symbol on dash board


It means you're "due" for an oil change. Your vehicle has a manual reset mileage counter that a technician usually resets after doing an oil change. That doesn't mean s/he actually did reset your oil life.

Nov 01, 2015 | Ford Expedition Cars & Trucks

1 Answer

2011 terios . Yellow spanner light comes on. What does that mean


The yellow spanner light indicates a service is due

Jul 09, 2015 | 2010 Daihatsu Terios 1.5

1 Answer

My holden cruze has code 79


I done magior service but still code 79 on the display with spinner car sign really frustrd from this car...

Mar 25, 2012 | Holden Cruze Cars & Trucks

1 Answer

I have a spanner symbol on my 407. what does this mean??


You need to carry out the periodical car service due (e.g. engine oil & filter, air filter, fuel filter, cabin air filter). The "service" spanner symbol "reset" button is placed on the lower right corner of the dashboard. See picture below:

tdisline_303.jpg
Then you should reset the "service" spanner symbol by pressing on the "reset" button on dashboard, when ignition key is in OFF position. Hold the button pressed and turn ignition key in ON position. Hold the button pressed and see on the dashboard successive numbers will appear: "10", "9", "8", ... , "1", "0". Then release the button and switch OFF the ignition key. The "service" spanner symbol followed by "20000 km" (or "30000 km" depending of the engine type), will appear for few seconds after turning ignition key in ON position, and will dissapear after engine starting. The car service due was reseted.

Please do rate my response. Thanks!

Feb 21, 2011 | 2005 Peugeot 405

1 Answer

If the spanner symbol on a fiat ducato dash is illuminated and the vehicle was only serviced and Mot'd 3000 miles


are you trying to figure out why the "spanner symbol is illuminated" after the vehicle has been serviced? I would take it back to the place you had it serviced and tell them about it.

Jan 23, 2010 | 2006 Fiat 124

1 Answer

My service engine light just came on and i'm wondering what that might mean and what i need to do about it now.


service due light or engine management light??
service light should be a spanner symbol engine light should be amber -yellow colour and looks like a gearbox.
service light.check if your vehicle is due a service if so book it in with your main dealer for a service and they will reset the warning indicator ,or if you know someone local who maintains your car they can reset the service light by holding in the reset trip button whilst turning ignition to pre start position on the display it should count down from ten -0 then reset itself and the light should go out.
management light
this can only be looked at by a suzuki main dealer where they have the correct diagnostic equipment .
dont worry to much if the car feels and drives ok its probably picked up a small fault in the ecu and will be cleared with the diagnostic check .

Dec 22, 2009 | 2001 Suzuki Grand Vitara

1 Answer

Spanner symbol on dash, and pinging when turning ign on


try; 1. Switch off the engine and turn off the key 2. Turn the key on second level just before cranking and press M button twice 3. Within 10 sec, turn key off 4. press and hold the M button 5. Swith on the key and keep holding M button 6. Wait until hear buzz sound 7. release the buttin

Dec 06, 2008 | 2007 Dodge Sprinter

1 Answer

Holden barina 2003


it means its due for service. If u wanna get rid of it without servicing the vehicle then as you start the car simultaneously push the ODOMETER reset button on the dash and it will wipe it. This will however just delay the point your car needs servicing.

Jun 04, 2008 | 2003 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...