Question about 1995 Chevrolet K1500

Open Question

Seat problem no easy entry reclimer

No easy entry on seat for ext cab

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: BROKEN HANDLE TO RECLINE SEATS ON 1999 S-10 EXTENDED CAB PICKUP

Ebay sells a replacement handle that looks exactly like factory handle but just screws on, it is a very common thing to break, as mine did.

Posted on Dec 11, 2008

Ad
  • 1118 Answers

SOURCE: Have 99 extended cab silverado

is it that the plug on each is different? or are the wires color coded different on each?

Posted on Feb 03, 2009

  • 22 Answers

SOURCE: how does the back seat fold up in a 98 chevy pick up ext cab?

There is a little loop of material hanging under the seat on both sides, pull this towards the front of the truck and the seat will unlatch to fold up.

Posted on Apr 02, 2009

countrysi248
  • 443 Answers

SOURCE: Need to replace driver light grey leather power seat - where to go.

I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguyss.gif IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.

Posted on Apr 20, 2009

  • 40 Answers

SOURCE: bucket seats with driver 1 and 2 memory and also seat warmer oh and the seat warmer does not work ever since.

Hi I'm not to clued up on 2004 silverado 1500 LT crew cab, obviously you'll check the fuse box & even replace the fuse wouldn't hurt giving it a try. Also try checking the electric motor for the seat. No cables lose or broken? Nothing jamming the seat? Is there any sound at all coming from the area where all the electrics are under the seat? Can you hear a motor straining?Just a few thoughts. Good luck

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 LINCOLN ZEPHYR DRIVERS ELECTRIC SEAT WILL NOT MOVE BACK WHEN KEY IS TURNED OFF


Principles of Operation
The driver seat module (DSM) is on the controller area network (CAN) communication network. To support several vehicle subsystems, the module permits intermodule and diagnostic tool communications.
The DSM controls the memory driver seat and the passenger memory power exterior mirror. This passenger memory power exterior mirror feature allows the driver to program personalized mirror positions. Once the driver stores a mirror position, the driver can recall the setting by pressing the corresponding memory switch or by using a programmed remote keyless entry (RKE) transmitter. For additional information, refer to Section 501-10 .

How to Diagnose Controller Area Network CAN

Driver Seat Module - Memory Seat
The power driver seat, power outside rear view mirrors and power adjustable pedals are controlled by the driver seat module (DSM) only when the vehicle is equipped with the programmable/recall memory option. The DSM is located on the driver seat track.
This system allows automatic positioning of the driver seat to 2 programmable positions.
  • A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat switch assembly. The driver must then depress the memory SET switch which activates the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2.
  • If no memory switch input is received within the 5-second time limit, the operation is aborted and the memory seat position switch (set switch) LED is turned OFF. This also occurs if one of the following inputs is received during the 5-second programming limit:
    • Driver seat control switch
    • Memory seat position switch (set switch)
    • Power adjustable pedal switch
A programmed seat position can only be recalled when the transmission selector is in PARK or NEUTRAL with the ignition switch in the RUN position. A position may be programmed at any time.

Easy Entry/Easy Exit
The driver power seat easy entry/easy exit feature can be enabled/disabled. Refer to Section 418-01 or the owner's literature.

This may need to be done with a scan tool

Apr 24, 2017 | Lincoln Cars & Trucks

1 Answer

94 ranger ext cab, seat question


no they change the plug and wiring. if you want to put them on you need to swap your plug over to the other one/s look on line for the wiring code for both types and make the plug up from the wiring code.

Jan 22, 2014 | Cars & Trucks

1 Answer

Remove rear seat 1993 chevy 1500


I just took out my rear seat from my 1993 Cheyenne ext cab. Fold the back seat in the up position. There are 2 square stubs sticking out from each side that the hinge plates of the seat slip over. Take out the 5/8 bolt and washer securing the hinge plate to the stub--slide the seat assembly toward the rear of the cab--and lift up and out.
Once you have the right solution--it is a 5 minute job !!!

Feb 23, 2013 | Cars & Trucks

1 Answer

My 2006 Hyundai Sonata GLS driver side power seat will go reclime back but will not come back up. It's hard to drive with the seat like that. Is there a recall on it? The sunviser keep falling down as...


Recalls are something you ask a service manager
at a dealership. Recalls ,unless the Govt gets involved,
are dealer only issues & seldom anything coming
your way when the warrantee runs out

Both issues will have to be checked out & repaired
as necessary at your expense

Jun 23, 2011 | 2006 Hyundai Sonata

1 Answer

Does my rear seat fold down in my 2006 ford f-150 ext. cab


Seat bottoms fold up.

You can remove the rear seat back, if that is what you are looking for. Just post a comment back.

Jul 01, 2010 | 2006 Ford F-150

1 Answer

2001 Lincoln LS Easy Entry power seat function


may need dealer to reclaibrate using his tool.

Principles of Operation
Driver Power Seat The driver power seat is controlled by the driver seat module (DSM). The DSM does not need to be configured, however the drive seat does need to be calibrated when the DSM is installed. The driver seat regulator control switch provides voltage to the DSM when activated. The neutral position of each driver seat regulator control switch position is a ground state through the seat regulator control switch contacts. A voltage input causes the DSM to power the appropriate motor until the input is removed. Ground is the normal state of the motor circuits through the DSM and is not switched to control the motors. The DSM internally switches the appropriate line from ground to power to adjust the motors.
As the seat is adjusted, the DSM constantly monitors the motor position sensors to record the current seat position. The DSM will remove power from the motor upon termination of the seat regulator control switch input or if the DSM does not see movement from the motor by monitoring the position sensor. The DSM must be calibrated to the seat track it is controlling. For additional information, refer to Seat Calibration. Once the DSM is calibrated to the seat track, it will only allow movement within the calibrated range.
Seat Calibration The DSM is calibrated using a scan tool. The calibration procedure automatically powers the driver power seat through its full range of motion and records the full stop positions by monitoring the motor position sensors. Once the full stop positions or range of the seat have been recorded, the DSM will only operate within the calibrated range. Any input attempting to drive the seat beyond the calibrated range will be ignored. This calibration is used for all seat control functions including manual switch control and memory recall positioning. During the seat calibration, the DSM may identify a function that is inoperative, such as a position sensor not changing. If the DSM identifies a concern that has a related diagnostic trouble code (DTC), the DSM will set the related DTC at the end of the validation procedure.
The calibration procedure powers the seat track adjustments to the end of their travel, which is determined by the DSM seeing a change of state in the motor position sensors. If there is a concern with the seat track or motor position sensor that limits the travel, the DSM will interpret the stopping point as the end of travel and store the position. The DSM is not able to determine if the seat has moved to its full travel position. It is only capable of monitoring and storing the amount of travel seen by the position sensor changing states.
For additional information on carrying out the power seat calibration procedure, refer to the scan tool operating manual.
Memory Seat Memory seat positioning can be recalled with the memory switches on the driver door panel or a programmed remote keyless entry transmitter. In either case, the DSM receives a memory recall 1 or 2 command from the driver door module (DDM) over the SCP communication network. The memory recall switches are a hardwired input to the DDM. The DDM also receives the remote keyless entry transmitter signals. Once a valid memory recall command is received from the DDM, the DSM moves the drivers seat to the position stored in memory by powering the appropriate motors and monitoring the motor position sensors until the position is reached.
Easy Exit/Easy Entry The easy exit function moves the seat backwards about two inches when the ignition key is removed from the ignition switch. The DSM receives a key out command over the SCP communication network and powers the driver seat rearward. This function will not operate if the seat is less than the travel distance to the end of the track, or the function has been deactivated at the message center driver personality settings. The DSM will also cancel this operation if a valid input command is received, such as the seat regulator control switch or memory recall request.
The DSM will record the current seat position before powering the seat for a easy exit function. This recorded position will be used to return the seat to this position on the easy entry operation. During easy entry operation, the seat is returned to the position previous to the easy exit operation. Easy entry operation will be cancelled if a valid input command is received by the DSM.
Passenger Power Seat The passenger power seat motors are hardwired to the passenger seat regulator control switch. The circuits are normally at ground through the seat regulator control switch. The individual circuit is switched to power when the specific adjustment position is selected.
Heated Seats The driver and passenger heated seats share a common battery and ignition feed. A separate shared ignition source supplies the heated seat switches. When the heated seat switch is pressed with the ignition switch in RUN, a momentary voltage signal is sent to the heated seat module. The heated seat module then supplies power to the heating element circuit. The cushion element and seat backrest element are wired in series and powered by the same output. The heated seat module also will ground the separate indicator circuit at the heated seat switch to indicate an ON state. The heated seat module will remain on until the heated seat switch is pressed and a momentary voltage signal is received, or until 10 minutes expire. If the ignition source is removed from the module, the heated seat module will enter an off state and will not return to ON until the switch is once again pressed with the ignition switch in RUN. The heated seat module is designed to heat the seat to 37.5°C (99.5°F) and maintain the temperature until time-out or switched off. This temperature is maintained by the heated seat module monitoring the temperature sensor located in the seat cushion element, and adjusting the current flow to the heating elements.
Inspection and Verification
  1. Verify the customer concern by operating the system.
  1. Visually inspect for obvious signs of mechanical or electrical damage.

    Visual Inspection Chart Mechanical Electrical
    • Front seat track motors.
    • Front seat track binding or obstructed.
    • Front seat backrest power recline.
    • Lumbar motor.
    • BJB Fuses 411 (15A), 421 (20A), 425 (40A), 428 (20A)
    • CJB Fuses 205 (5A), 216 (5A), 207 (5A)
    • Seat regulator control switch.
    • Memory set switch.
    • Lumbar seat control switch.

May 04, 2009 | 2001 Lincoln LS

1 Answer

How does the back seat fold up in a 98 chevy pick up ext cab?


There is a little loop of material hanging under the seat on both sides, pull this towards the front of the truck and the seat will unlatch to fold up.

Apr 02, 2009 | 1998 Chevrolet K1500

2 Answers

I want to know where i can find the door code for a ford 2004 f150


If you are refering to the Keyless entry code it may be on a white wallet card in the owners manual package. If your truck was bought used it may be with the previous owner.

Feb 20, 2009 | 2004 Ford F150

2 Answers

2008 Colorado Airbag Deactivation


usually you can insert your key in the slot thats near the airbag light in the dash and rotate it to turn it on and off

Feb 08, 2009 | 2008 Chevrolet Colorado 2WD

1 Answer

Easy entry/exit seats stopped working


get out of the can use the power seat button move the seat fully foreward and backwards three times that will reset the position calibration..

Feb 04, 2009 | 2006 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...