Question about 2007 Honda Odyssey

Open Question

Routing for 2007 honda odyssey serpentine belt 3.5l

Need diagram and hint to get enough tension off pully need one more inch cant even get old belt back on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: serpentine belt

08f9562.jpg



This is a picture i drew in paint , for the 2001 honda passport belt wrap with a 3.2Liter V6, picture worth a thousand words.

Posted on Dec 27, 2008

Ad
ZJLimited
  • 17970 Answers

SOURCE: I need a belt routing diagram for a 1993 Honda

1990-95 4-Cylinder Accord and 1992-95 Prelude

be22676.gif


On all engines except VTEC, the belt adjuster arm must be locked in place using one of the lower cover mounting bolts

120efa3.gif


The balancer shaft must be held in position during timing belt installation

0370564.gif


Timing belt and components used on the Accord V-6

I hope help you with this. Good luck (remember rated this help).




Posted on Aug 25, 2009

ZJLimited
  • 17970 Answers

SOURCE: i need serpentine belt diagram for honda pilot

2005 HONDA PILOT - V6 3.5L 3471cc GAS FI N J35A6

Belt Routing Diagram Multiple Accesorie
b3b4861.jpg


More details: DAYCO Catalog

I hope help you (remember rated this help) Good luck.

Posted on Sep 25, 2009

  • 1 Answer

SOURCE: I need the serpentine belt routing diagram for a

where is the diagram !!!!

Posted on Nov 12, 2009

  • 97 Answers

SOURCE: the timing belt diagram for a honda odyssey 96.

I find that Advance is very helpful on these ?

Posted on Dec 31, 2009

Testimonial: "thanks. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing serpentine belt on odyssey


I wouldn't disconect the batry just make sure the key is out of the vehicle so it can't be started by accident when you are working on it. Hint: Draw a diagram of the belt routing prior to removeing the belt.

Jun 28, 2012 | 2007 Honda Odyssey

1 Answer

How to change serpentine belt on 2006 buick lacrosse


Start by drawing a diagram of the belt routing. Serpentine belts normaly have 1 spring loaded tensioner (1 pully will have a nut or 3/8 or 1/2 inch drive hole) That will be the tensioner. get spanner or ratchet to fit & lever the tensioner away from the belt. Remove belt. fit new belt to most pullys except the easiest to get to, lever the tenioner back & fit the belt to the last pully, Check the belt is on all pullys properly & your done

Jun 28, 2012 | Cars & Trucks

2 Answers

Needs new serpentine belt -1992 chevy chyenne truck


http://www.doocu.com/pdf/read/23494 that has all the belt routings, just find your motor, and get the diagram number,, scroll to the bottom of the page, and it has all the diagrams

Jul 19, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

I need to replace the serpentine belt on my car. How do I do that?


These instructions will help you . and also the picture below will help you more.
1
Locate the belt-routing diagram, printed on the fan shroud or possibly applied to the underside of the hood. This diagram shows you how to properly route the new belt, as well as identifying the location of the various pulleys, including the serpentine belt tensioner.
2
Move the belt tensioner off the Sable's belt using the serpentine belt tool. The tool connects to the side of the tensioner's arm and essentially acts as a handle for use in moving the tensioner. You can purchase a serpentine belt tool at most auto-part retailers.
3
Slip the belt away from the tensioner with your free hand and release the pressure on the tensioner with the tool. Pull the belt off the rest of the pulleys by hand and then remove it from the engine well.
4
Grab the old belt and new belt with one hand and put your foot through the other end of the belts. Stretch them both to their full length and check to ensure their both the same size. The old belt may have up to one-inch of extra length due to normal stretching that occurs during the belt's service life.
5
Wind the new belt, rib side to the pulley, around the crankshaft pulley. Consult the routing diagram and route the belt to the next pulley on the diagram. Continue to route and then check the diagram until you have the belt wound around every pulley except the belt tensioner pulley.
6
Double check to make sure the belt routes exactly as shown on the diagram and then move the tensioner aside once more so you can route the belt over the tensioner pulley as shown in the diagram. Move the tensioner back into place slowly and remove the tool.

Good luck

tgv1501_23.jpg




Jan 03, 2011 | 1996 Mercury Sable

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

Need to replace Serpentine belt and p/s belt on my 2002 honda odyssey is this complicated?


the procedure is as follows:-- You have to do it from underneath the vehicle. Take off the rivets to the two plastic covers, and then you will be able to see the tensioner for the belt. Use a 3/4 inch wrench on the tensioner (don't put it on the bolt that holds the tensioner on), and pull it toward the vehicle. The belt will loosen, and you can take it off. As a car owner, you know how important the belt tensioner is for your 2002 Honda Odyssey. However, internal parts wear and damage will loosen or seize the tensioner wheel, causing the belt to slip and make noise. Eventually, the belt may break, shut down the engine and lead you into a serious traffic accident. Before that happens, replace the tensioner on your Honda model and save yourself a lot of problems:---- Remove the Drive Belt:-- 1)Look for the drive belt routing diagram on your vehicle's engine compartment. This is a black and white label, about 4 by 6 inches, usually attached to the radiator shroud or near the strut towers inside the engine compartment. This diagram will be your guide when reinstalling the drive belt. If cannot find one, make a simple sketch on a piece of paper. 2) Insert a belt-tension release tool, or similar tool, into the auto-tensioner arm. 3)Rotate the auto-tensioner arm counterclockwise and slip the belt off the tensioner pulley. 4) Release the auto-tensioner but do not let it snap back in place. 5) Remove the drive belt from the engine compartment. Replace the Belt Tensioner 1) Unscrew the two auto-tensioner mounting bolts using a ratchet, ratchet extension and socket. Note the location of each bolt because they are of different size. 2) Remove the old auto-tensioner from the engine compartment. 3) Set the new auto-tensioner in place and start the two mounting bolts by hand. Make sure you install the bolts in their original place. 4) Start tightening the bolts until they hit the stop using the ratchet, ratchet extension and socket. 5) Torque the two bolts using a torque wrench. Torque the small bolt to 16-foot pounds [22 Nm] and the large bolt to 47-foot pounds [64 Nm]. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 01, 2010 | 2002 Honda Odyssey

1 Answer

How do i change the belt


Your belt is a serpentine belt so to replace it you will take a ratchet (usually a half inch drive) and remove the tension on the belt by placing the ratchet into the belt tensior pully. Once tension is removed you slip the belt off and install the new one the same as took the old one off. Pay attention to the routing but if you forget the diagram is on the front of the car by the radiator.

Feb 16, 2010 | 1997 Chevrolet Cavalier

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

1 Answer

Serpentine belt replacement


yes you will need to look for the pully that acts as a tensioner it should be identified on your rad support or underside of your hood where you will have a diagram that shows your routing of the s belt it will show you witch pulley the belt goes around and so on it should also identify the tensioner you need to use a big prybar or thwere may be a spot on thhe tensioner to fit a half inch rachet or a johnson bar relieve the tension and remove the old belt and pay close attention as to how the belt comes off and make sure you put it back the same way. hope this helps..

May 29, 2008 | 1998 BMW M3

Not finding what you are looking for?
2007 Honda Odyssey Logo

Related Topics:

1,252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...