Question about 2007 Hummer H3X

Open Question

How to change #1 spark plug h3 alpha 2008 - 2007 Hummer H3X

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

iambanshee74
  • 3489 Answers

SOURCE: H3 Alpha. Vibration

the balance on ANY H1 can be critical. i am a HUMMER H1 tech. for them to say its normal is a lie. they can be balanced with the proper machine and technician. alignment will not cause vibration and it is also critical that the specs on the alignment (toe specifically) form a diamond pattern. that is to say the fronts should be adjusted in 1/16th of an inch and the rear 1/16th out. that will add life to your tires as well as good handling. H1 s are the best. anything further email me at iambanshee74@yahoo.com

Posted on Nov 02, 2009

  • 2309 Answers

SOURCE: How often do i need to change my oil in my 2008 h3 hummer

follow the owners manual, usually 3 to 5 thousand miles, oil does not go bad but it absorbs contaminants, and can only do so much, also check any filters

Posted on May 05, 2010

  • 1403 Answers

SOURCE: I am searching for a

try web resourceful.com for a complete auto manuals online

Posted on Aug 15, 2010

alicantecoli
  • 22156 Answers

SOURCE: Need to know how to

pull one lead off at a time ,and change one plug at a time then you cannot go wrong

Posted on Dec 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The lights to my seat warmer light up but the seats don't get warm.


Most seat warmers have very small wires hat run in a grid. When voltage passes thru them they create heat. Like a Toaster

Very possible the wire broke.

Jan 13, 2016 | 2008 Hummer H3 Alpha

1 Answer

Why will my 2008 hummer H3 door locks with key but will not unlock with key. the key will not turn to unlock


The lock assembly in the door is faulty. It gets tricky since Hummers are no longer in production. Changing the door lock cylinders will get you a different key than the ignition. Any GM dealer should be able to get you the parts.

Nov 19, 2015 | 2008 Hummer H3 Alpha

2 Answers

2008 Hummer H3 idiling then shutting off/ hard cold start


Check the coolant level please,my hummer wont start when the coolant is low in the engine

Mar 15, 2012 | 2008 Hummer H3

1 Answer

2007 h3 hummer rough or low idle runs fine on open road


My dealer finally found the problem on my 2008 H3. It was misfiring cylinder 1. The coil was bad so they replaced the plug and coil and its not back to normal. there was actually water (moisture) in the coil and spark plug. I have seen on other forums that this is a known problem. Also had the injectors flushed and it runs great now.

Dec 28, 2011 | Hummer H3 Cars & Trucks

1 Answer

Need to know how to change the spark plug wires and spark plugs on a 2006 H3 Hummer.


pull one lead off at a time ,and change one plug at a time then you cannot go wrong

Dec 07, 2010 | 2006 Hummer H3

1 Answer

Door jar error light will not go off even after opening and closing all the doors. It started when i opened the back hatch door Have an 08 H3 alpha


You need to locate the rear door hatch switch and free it up or replace it if that is not an option.Merry Christmas and good luck!

Dec 24, 2009 | 2008 Hummer H3

1 Answer

H3 Alpha. Vibration


the balance on ANY H1 can be critical. i am a HUMMER H1 tech. for them to say its normal is a lie. they can be balanced with the proper machine and technician. alignment will not cause vibration and it is also critical that the specs on the alignment (toe specifically) form a diamond pattern. that is to say the fronts should be adjusted in 1/16th of an inch and the rear 1/16th out. that will add life to your tires as well as good handling. H1 s are the best. anything further email me at iambanshee74@yahoo.com

Jun 23, 2008 | 2008 Hummer H3

Not finding what you are looking for?
2007 Hummer H3X Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...