Question about 2002 Toyota Tacoma

Open Question

How to install front bumper, grill&lower valance

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: Trouble removing 1999 Solara Grille

sorry to tell you that but you must take the bumper off and its pretty easy there are retainers up top remove them remove the bottom of the bumper ones and they may have bolts now for the last part its 100 mm at the fender edge and bumper just slide off and then you can take and change the grille

Posted on Jan 27, 2009

Ad
  • 1 Answer

SOURCE: front grill on toyota solara

That is correct - it worked for me - now the questions is - How do I remove the old logo ?

Posted on Apr 25, 2009

  • 1810 Answers

SOURCE: How to install a bumper valance?

go on youtube there are many great vids

Posted on Dec 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of radiator on a 2007 ford edge


Removal & Installation
  1. Drain the cooling system.
  2. Remove the cooling fan motor and shroud, as outlined in this section.
  3. Remove the front bumper cover, as follows:
    • Raise and safely support the vehicle..
    • Remove the 2 bolts from the top of the radiator grille.
    • Remove the 4 scrivets from the top of the radiator grille.
    • Remove the 3 lower pin-type retainers.
    • Remove the 6 fender splash shield screws (3 each side).
    • Remove the 4 lower screws (2 each side).
    • Disconnect the side marker lamp electrical connectors, if equipped.
    • Disconnect the fog lamp electrical connectors, if equipped.
    • Remove the front bumper cover.
    • Pull the corner of the bumper cover from the bracket.
  4. Disconnect the upper radiator hose and lower degas bottle hose from the radiator.
  5. Disconnect the lower radiator hose from the radiator.
  6. Lift and remove the tabs from the radiator support and position the radiator towards the engine.
  7. Remove the 2 A/C condenser bolts from the radiator and separate the condenser from the radiator. To install, tighten to 10 Nm (89 inch lbs.).
  8. Remove the radiator.
To install:
  1. Installation is the reverse of the removal procedure, noting the following:
    • Tighten the A/C condenser-to-radiator bolts to 10 Nm (89 inch lbs.)
    • Fill and bleed the cooling system.

Jul 27, 2014 | 2007 Ford Edge SEL

1 Answer

2007 chrysler t&c. have no control of heat or air cond. bought ambient temp sensor need to know location for install


This sensor is located behind the front bumper cover, if yhou open the hood and remove the screws holding the top of the bumper cover down you should be able to reach down and get to the bolt. It mounts to the drivers side of the lower radiator support. If you have the right tools you may be able to get to it from the lower part of the bumper cover through the lower grill section.

Apr 30, 2013 | 2007 Chrysler Town & Country LX New Cars

1 Answer

2011 Dodge Caravan. Ran into a metal wheelchair ramp rain. Drove back - dislodged - the black trim insert near the bottom of the plastic bumper cover. That black plastic thing has to be just put back on...


Hello Bruce...here are the steps to follow per All Data.

Release hood latch and open hood.
Remove the headlamp assemblies.
Hoist vehicle and support with safety stands.
Remove the five push pin fasteners attaching bottom of fascia/air dam to radiator closure panel.
Remove front wheels.
Remove front wheelhouse splash shields fasteners as necessary to gain access to bolts attaching front fascia to fender.
Remove the two bolts and two nuts attaching fascia to the front fenders (Fig. 1) and (Fig. 2).
Disconnect fog lamp wire connectors, if necessary.
Lower vehicle.
Remove two bolts attaching the upper grille support to the headlamp mounting panel at each side of the grille.
Remove bumper fascia from vehicle.
INSTALLATION

Position front bumper fascia on vehicle (Fig. 1) and (Fig. 2).
Install the two bolts attaching fascia to headlamp mounting panel at each side of grille.
Hoist vehicle and support with safety stands.
Install the two bolts and two nuts attaching fascia to the front fenders. The fascia should be flush to fender.
Install front wheelhouse splash shields fasteners.
Install front wheels.
Connect fog lamp wire connectors, if necessary.
Install the five push pin fasteners attaching bottom of fascia to radiator closure panel.
Lower the vehicle.
Install the headlamp assemblies.

The "push pin fasteners" are the pain you are having i believe. They push in, but to get them out you need squeeze them on the back & pull at the same time. If you happen to break a few, you can buy them in various sizes at the auto parts store. I hope this information is helpful, an owners manual will not have any info like this in it.



12_2_2011_5_37_49_pm.jpg

Dec 02, 2011 | Cars & Trucks

1 Answer

Want to replace bumper and apron on 99 S10


· It's an easy one to do. You can chose a bumper that you can paint or choose a chrome one that I have in the picture then it saves you from painting. The bumper valance is a Street Scene brand that is painted to match the rest of the body. The valance comes in a black color out of the box which you may put on the truck without painting., there are other more aggressive looking ones out there however I select the one pictured.. Since I have a 4x4, I removed the front tow hooks so the valance can fit and connected new fog lights using the existing factory switch. _732.jpg

Feb 10, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

I am looking for a diagram of the bumper assembly for a 2004 Chrysler town & country.


Hope this helps, it it does please leave feedback and vote Thank You and Good Luck


  1. Release hood latch and open hood.
  2. Remove the headlamp assemblies.
  3. Hoist vehicle and support with safety stands.
  4. Remove the five push pin fasteners attaching bottom of fascia/air dam to radiator closure panel.
  5. Remove front wheels.
  6. Remove front wheelhouse splash shields fasteners as necessary to gain access to bolts attaching front fascia to fender.
Fig. 1 133387737
Fig. 2 133387738

  1. Remove the two bolts and two nuts attaching fascia to the front fenders (Fig. 1) and (Fig. 2).
  2. Disconnect fog lamp wire connectors, if necessary.
  3. Lower vehicle.
  4. Remove two bolts attaching the upper grille support to the headlamp mounting panel at each side of the grille.
  5. Remove bumper fascia from vehicle.
INSTALLATION


  1. Position front bumper fascia on vehicle (Fig. 1) and (Fig. 2).
  2. Install the two bolts attaching fascia to headlamp mounting panel at each side of grille.
  3. Hoist vehicle and support with safety stands.
  4. Install the two bolts and two nuts attaching fascia to the front fenders. The fascia should be flush to fender.
  5. Install front wheelhouse splash shields fasteners.
  6. Install front wheels.
  7. Connect fog lamp wire connectors, if necessary.
  8. Install the five push pin fasteners attaching bottom of fascia to radiator closure panel.
  9. Lower the vehicle.
  10. Install the headlamp assemblies.

Jan 02, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

Can you help me dis-assemble my front bumper honda odyssey 1999 ?


Front
  1. Note the radio security code, then disconnect the negative battery cable.
  2. Remove the bolt from the lower part of the bumper just in front of the wheel opening, and remove the self-tapping screw from the rear most portion of the bumper at the forward portion of the front wheel well.
  3. On V6 Odyssey models, perform the following:
    • Remove the grille.
    • Remove the pins and clips from the lower front of the bumper.
  4. On 4-cylinder Odyssey models, remove the bolts from the left and right side lower brackets for the bumper at the ends of the lower air intake.
  5. Pull the ends of the bumper outward.
  6. Have an assistant help guide the bumper up and away from the vehicle.
  7. Installation is the reverse of the removal procedure.

Mar 06, 2010 | Honda Odyssey Cars & Trucks

1 Answer

What is the part below the grill called?


For a 2002 Passat, it looks like its the bumper cover. Unless you mean below the bumper grill, then that's called the front spoiler / or lower valance. check this out- https://www.1stvwparts.com/partscat.html

Dec 14, 2009 | 2002 Volkswagen Passat

1 Answer

The bumper cover has cracked, due to a parking lot wheel stopper getting caught underneath. What is the most afforable way to replace the bumper cover?


What you need is called a LOWER FRONT VALANCE.

You can get one from a VW dealer or search the web to buy.

Easy to install. I got mine from ebay for $20.00

Sep 24, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

How do i change out the headlights. Remove the covers as well.


Depending on the year you have to remove the grille to gain access to the mounting bolts under the grille, as well as the lower air vents in the lower valence to gain access to those mounting bolts. Remove the screws from the fender well liner to the bumper and pull the front bumper off to gain access to the lower mounting bolts for the headlight assembly.

Dec 03, 2008 | Volkswagen Jetta Cars & Trucks

Not finding what you are looking for?
2002 Toyota Tacoma Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...