Question about Chrysler Voyager

Open Question

Where can I find the headlamp collar for a 2000 Chrysler Voyager if I need to replace it?

Had an accident and had to replace the headlight assembly on the drivers side. I went and pulled a good headlight housing from a local junk yard but not a ONE of the vans out there had the "Collar". I need one, but have no idea what its called so I can locate the part

Posted by on

  • Felicia Brown Jan 18, 2013

    I need to purchase a "collar" for my drivers side. the assembly I pulled from a junk yard did not have it. Can't find the part at part stores or online. I know how to change the bulb.... I need the collar.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to replace 2005 driver's

see the attached
b32c2f4.jpgdf9f90a.jpg

Posted on Dec 15, 2008

bunnydawg
  • 5158 Answers

SOURCE: 2000 CHRYSLER CONCORDE HEADLIGHT BULB REPLACEMENT

thought i already answered this... must have been for someone else... you should be able to access the bulb from within the engine compartment... if it's on the side of the battery you may have to remove it. do not touch the bulb with your fingers as that shortens the life of it.

Robert

Posted on Jan 26, 2009

dennymulford
  • 1055 Answers

SOURCE: locating a 2002 chrysler voyager thermostat

trace out the top raidtor hose where it goes too the block and thats where the thermostat is,

Posted on Mar 05, 2009

  • 1129 Answers

SOURCE: 2006 Elantra; Does the entire headlight assembly

On these the bulb unscrews from the back

Posted on Jul 14, 2009

  • 1986 Answers

SOURCE: Replacing bulb (Headlight) in 2000 accent GL

once you pop the hood, there should be a cover behind the light housing that you twist to open the backing.. inside the housing will be a spring lever that secures the bulb down... unhook the spring and disconnect the harness connecting to the bulb...

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler Sebring 2008 headlight assembly removal


some times headlamp units have a plastic retaining clip on the underside of headlamp, does the headlight move from side to side? try to pull the headlight back from the top of unit then lift up the headlamp unit, if not it could be the headlamp adjusters holding unit in place.

Dec 06, 2013 | 2008 Chrysler Sebring

1 Answer

How do remove a headlight from the the assembly for a 1999 buick park avenue


Hello there,
For you to be able to take off the assembly of the headlight on your car, please follow the steps below:
Ensure that the headlight switch (on the driver side of the Regal's passenger cabin) is in the off position.
Release the hood latch and open the hood.
Approach the passenger-side headlamp assembly. (Although on your left, this is the right-side lens assembly when sitting inside the vehicle.)
Locate the two white retaining brackets on the top rear edge of the assembly.
Lift the tabs straight upward about an inch to an inch and a half.
Grab the assembly from the sides of the front edge (being careful of any broken lens pieces; although the lens is made of plastic, you can still get cut by jagged pieces).
Firmly pull the assembly outward, away from the front of the Regal. Wiggle the assembly slightly to unseat the headlamp assembly alignment guide pins from their anchors.
Pull the assembly out only far enough to access the wire harness connections of the low-beam headlight, the high-beam headlight and the integrated parking/directional light.
Twist the retaining collar of the low-beam lamp (the outside lamp, toward the fender) a quarter-turn counterclockwise to remove the light from the headlamp assembly while it is still attached to the wire harness. Be careful not to contact the halogen bulbs with your bare hands, or you can damage the bulbs.
Twist the retaining collar of the high-beam headlight (the inner headlight, closer to the grill) in the same manner as you did the low-beam lamp to remove the high-beam bulb and harness from the headlamp assembly.
Twist the socket of the last remaining integrated parking/directional bulb and wire harness assembly a quarter-turn counterclockwise to remove it from the headlight assembly.
Discard the assembly and replace it with the new headlamp assembly by following the steps above in reverse order. Make sure to align the tabs of the retaining collar and parking/directional lamp socket with the mating notches on the new headlamp assembly before turning them all clockwise a quarter-turn to lock them in place.
All the best Elect_Comp

Sep 13, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

I'm having a problem removing the headlight assembly from my 2004 chrysler crossfire, i've removed the 2 screws from the top and removed 1 from below through the wheel well, are there two screws...


Last I checked Chrysler had changed it's headlight mounting from external screws to just the two adjusting screws. Looking down from the top, you should be able to see two Torx head screws that are used to adjust the headlight assembly. The remove teh head light assembly you remove those and the assembly should come right out. Both of these screws or adjusters will be 6 to 8 inches long. I hope your not removing this to change the headlight it self. Chrysler has been using the insert bulbs for several generations and to replace the bulb you only have to unlock the collar on the back of the light assembly and pull and then replace the bulb.

May 14, 2011 | 2004 Chrysler Crossfire

1 Answer

Is there a headlight wiring loom for a chrysler voyager, or do I have to replace the entire headlight unit


Loom? The 1990 Models were mixed. Before that the whole head light was replaced. In the 2000 year models you need to locate the collar on the back of the head light, turn it counter clockwise and remove the bulb from the headlight assembly. Unplug bulb and replace then reverse the process to install. If you use the little machine that Walmart usually keep near the replacement bulbs in the Automotive section you can get verification of what type you have if your not sure. You will need to know the Year and model of your vehicle.

Oct 15, 2010 | Chrysler Voyager Cars & Trucks

1 Answer

How to change your headlamp in a 2008 gmc acadia


Open the hood and look in the area behind the headlight itself. You will see the wires running in to the light through a collar. Turn the collar counter clockwise and remove the assembly. Remove the bulb and plug in the new bulb and reverse the process to replace.

May 11, 2010 | 2008 GMC Acadia

1 Answer

How can I take my headlamp out for treplacement -


There are two star bit screws...they are long and run through the headlight assembly.Unscrew these two and pull them completely out from the top of the assembly. Once they are out you have to pull the headlight assembly out...there are pins that clip it in place...they are like the head of a spark plug...you just pull on the assembly and it pops out.

Installation is in reverse order.

Oct 12, 2009 | 1999 Chrysler Concorde

1 Answer

Replacing radiator fan motor on 2000 chrysler grand voyager


Disconnect the wires leading to both of the fans. Remove the cross-member that goes over the radiator. Remove the four bolts securing the fan assembly and lift it out.

Apr 13, 2009 | 2000 Chrysler Grand Voyager

1 Answer

Replace headlamp acura tl 2000 3.2


If you do not have a sealed beam assembly, then remove the four screws on top...when the headlight assembly comes out unclip the harness from the bulb assembly. Pull the bulb out and replace...don't touch the halogen bulb with your fingers...just the plastic base.

Mar 29, 2009 | 2000 Acura TL

1 Answer

Replacing headlamp on 2000 lhs how to


There are two bolts that hold the assembly in place to the radiator support. Pull these (they're long bolts) and the lamp forward. That's all there is to it. I own an Intrepid and these cars are very similar.

Dec 24, 2008 | 2000 Chrysler LHS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...