Question about 1987 Suzuki Samurai

Open Question

All bubs and fuses are good but dont have any fire in the back lights

I replace a used signal light switch, a new flasher. is their a big fuse that work the lights? my headlights works

Posted by on

  • billy boleware Jan 17, 2013

    my lights want work on my 1987 samuria. i replace the signal light switch,the flasher,fuses and bubs. i dont have any fire in the wires in back. my headlight work.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: How do I remove and replace headlight switch 95 Suzuki Sidekick?

steering wheel off ,airbag removed first to get to retaining nut.best advice unless you have a mechanics toolkit to hand is to entrust it to agent ,as they will know quickest way to do it.

Posted on Dec 25, 2008

  • 4 Answers

SOURCE: headlight problem

You probably need a new combination switch, located in the steering column, integrated into the control lever for lights. Remove airbag (if you have one) and then pull off steering wheel to access switches. We bought ours at you-pull junkyard, but I believe AutoZone also carries them for far less than dealer price.

Posted on Dec 28, 2008

  • 4 Answers

SOURCE: Headlights went dead on my 2006 Suzuki Forenza

as far as I can tell from all the posts (and i have the headlamp problem w/ my '05) is that there is a well known problem with that, and was also recalled for defective wiring...

Posted on Apr 16, 2009

  • 1 Answer

SOURCE: SIGNAL LIHGTS SCOOTER 50CC QINGQI

i want to but a 50 cc scooter from qunigqi what mods do i have to get the most speed out of it

Posted on Jun 18, 2009

  • 86 Answers

SOURCE: Suzuki Baleno '95 Tail Lights

i think you should take it into the dealer ship you might just have a short in the switch or wiring try and see if there are any relays and replace those first that just might be the problem and it will save you a lot of money then just taking it into the shop and them charging a ton of money for a such little work

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My saturn signal light work sometime than go off if it the flasher please tell me there it is in my car


IF TURN SIGNAL LIGHT DONT WORK SOME TIMES.CHECK FOR BLOWED OR LOOSE FUSE.CHECK TURN SIGNAL BULBS AND CHECK BULB SOCKETS FOR CORROSION.CHECK TURN SIGNAL FOR BAD GROUND.USE JUMPER WIRE BETWEEN GROUND SIDE OF THE TURN SIGNAL BULBS AND A GOOD CHASIS GROUND.IF ALL IS GOOD TURN SIGNAL SWITCH IS BAD OR FLASHERS GOING BAD.TURN SIGNAL FLASHER LOCATED ON CENTER CONSOLE SIDE PANEL GRASP THE FLASHER UNIT AND DETACH IT FROM THE FUSE BOX.IF YOU HAVE EARLY MODEL VECHICLE FLASHER UNIT LOCATED AT THE FRONT OF THE FUSE BLOCK.

Aug 23, 2011 | Saturn LS Cars & Trucks

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

3 Answers

No brake lights 3rd brake light works just put all new bulbs in.checked all fuses even under the hood,does this vehicle have a flasher fuses because those dont work either. both turn signal and rear lamps...


car should have an emergency flasher. If it isn't working, it could affect the brake lights. might be the same unit as the turn flasher but different relay inside. Is your fuse panel behind the glovebox? manual says flasher is in the fusebox. It's worth a try replacing this flasher unit. Looks like this:

ab6de9f.jpg

Sep 04, 2010 | 2000 GMC Jimmy

3 Answers

The blinkers and flashers are not working on my 2001 Grand Cherokee. Can you tell me where to locate the relay or switch to replace? Its not the fuse, we checked that first. thank you


when you get in your car and use the car turn signals and it does not work from the inside or out side and your hazard light dont work to then you need to replace the fuse located inside the front hood in a black box or inside the car located under the stering wheel next to the gas and brake pedle on the side. Remove it and check the fuses and flasher relay. The flasher relay in a black square looking fuse that has 3,4, or 5 prongs. That is your problem of why the hazord lights and blinkers are not working, you can go to a part store to find the flasher relay for 9 to 15 dollars max. Napa has more of a selection. PS.... when you find the flasher and its burn out it is no good ; make sure the volts match!!!! If you buy a flasher and it burns out instinly after replaced then wireing is short and go with less volts you hace to ballance things of your car was worked on before, things where changed. Check you lights in front and back brights and dim, brakes and reverse lights. replace bulbs if needed could correct the problem if flasher still doesnt let blinkers or hazord work. If bulbs where replaced and still no blinkers or hazord lights then you need a new or used (another) switch nob. You can go to a local junk yard and take off what you need off the same car you have and pay for it then replace it on your car. Or you can go to amazon ebay or such to find. If you are a WOMEN or OLDLADY or some one not good at removing parts then this is not your job. Find someone who can help, or pay something that could be so easyily done. I hope this solves your question.

Mar 31, 2010 | 2001 Jeep Cherokee

1 Answer

My brake, hazard and turn lights dont work, i


well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

Nov 13, 2009 | 2002 Chevrolet Astro

1 Answer

Dash lights-turn signal and rear lights


Access your fuse box and check the fuse labled- rear tail lgts,turn sgns, that fuse is blown, replace the fuse with the same value fuse, while your under there, on the fuse box or next to it you'll find 2 round plug in components, about the size of a Marshmellow, one of these is your flasher unit and the other is for your turn signals, replace both of these, even though one may work, it's just good sense to replace both, that shoud fix your rear lighting problem. good luck.....

Jul 11, 2009 | 1994 Ford Crown Victoria

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

1 Answer

1995 F150 the turn signals do not work, but


Look in the fuse panel and the turn signal flasher is the big round most likely yellow or silver in the corner of fuse panel. The emergency flasher is in the back side of fuse panel right directly behind the turn signal flasher.
Remove the emergency flasher and install it in place of the turn signal flasher and see if this corrects the problem and if so get a new flasher. If this does not correct it problem will most likely be the multi-function switch.

Mar 13, 2009 | 1984 Ford F 150

2 Answers

Turn signals dont work 97 Geo Metro


we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...