Question about 1995 Oldsmobile Cutlass Ciera
Nov 17, 2013
FRED THE REASON I SAID TURN THE LIGHTS ON THEN REPLUG IN , IS THAT YOU WILL SEE THE LIGHTS COME ON AND HEAR THE CHIME OF LEAVING THE LIGHTS ON WHEN YOU PLUG BACK IN. WHEN I LOOKED AT THE DIAGRAM IS WHEN I REALIZED THAT THAT 2ND WIRE SUPPLIED THE POWER TO THE FUSE BOX FUSES THAT IN TURN WOULD OPERATE EVERYTHING THAT WASNT WORKING. WHE YOU UNPLUG THAT PLUG, ITS ABOUT THE SIZE OF YOUR PALM, LOOK AT THE CONTACTS INSIDE AND MAKE SURE THEY ARE NOT CORODE. IF SO BUY SOME CLEANER AND APPLY. I HAD UNPLUGGED THIS PLUG ABOUT 6 MONTHS AGO WHEN REPLAVING THE BATTER AND HAD PUT THE GOOP STUFF IN THERE FOR THAT REASON. JUST THINK IF ALL THAT STUFF IS NOT WORKING AND YOUR FUSES ARE GOOD? YOU JUST AINT GETTING POWER TO THE FUSE BOX WHICH THEN THERE IS NO POWER TO EACH ITEM, HOPE THIS HELPS ANY QUESTIONS FEEL FREE, SINCE I SEE THIS IS AA BIG PROBLEM YET NO ONE ANSERED WITHA FIX
Nov 17, 2013
Posted on Nov 17, 2013
Check the Fusible Link box of the car.It is situated near to the car engine inside the hood or .bonet...and There is an another fusible link in the interior slightly down to the steering wheel...Check those things..
If the fuse is working Check relays.
Mainly if the car battery is 12v the fuse coming for park lights,mtere board light and liscence plate lights is 10AMP in lot of cars..Check it.. GOOD LUCK
Posted on Nov 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When you say "all fuses good" Does that mean the fuse panel on the passenger side end of dash...
and both power distribution boxes under the hood? They are attached to the fenders and you will have to remove the metal straps running over the covers to open them. Check power wire going to each box for tightness and 12 volts. If all the fuse's, relay's, and circuit breakers are good, you may have an issue with the "Body Control Module". You will find it under passenger side dash, behind the glove box. Might even be an issue with the ignition switch.
Posted on Aug 27, 2011
SOURCE: Car wont turn over.
There are a number of things that can prevent your engine from turning over. You should check the basics first, make sure the battery is fully charged, the battery cable connections at the battery are clean and tight. Make sure when you turn the key on in the run position, the check engine light is on before you crank the engine. Make sure there are not blown fuses in the underhood and interior fuse boxes that are related to the starting and engine control systems.
Posted on Jan 24, 2011
Tips for a great answer:
Apr 05, 2016 | Dodge Cars & Trucks
Dec 16, 2015 | 2004 Chrysler Town and Country
Feb 20, 2013 | 2002 Oldsmobile Silhouette
Aug 08, 2009 | 2006 Chrysler Sebring
Apr 04, 2009 | 2002 Dodge Intrepid
Sep 20, 2008 | 2003 Mitsubishi Eclipse Spyder
Sep 08, 2008 | 1993 Chrysler New Yorker
Jun 28, 2008 | 2001 Dodge Dakota
414 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: