Question about 2004 Ford F250

Open Question

CODE P1812 my 4 wheel drive wont work, the hubs lock on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
shawn_neal_6
  • 19 Answers

SOURCE: My left front locking hub on 4x4 ford truck wont lock in

check the cv joint

Posted on Dec 20, 2008

Ad

SOURCE: When in auto hubs the 4 wheel drive doesn't work

They are operated by vacuum. Check to make sure the vacuum lines are connected and not ripped or anything. If that checks out fine, remove the vacuum line from the hub and apply vacuum to the hub, if the hubs lock then the problem is in the vacuum line or switch.

Posted on May 09, 2009

  • 3 Answers

SOURCE: Noise in front axle when I lock my hubs on an 1988 Ford F-150

i would bet you need to replace your locking hubs

Posted on Jul 30, 2009

MNfisherman
  • 11896 Answers

SOURCE: front hub to lock in to 4 wheel drive is locked

This is common. the locks due tend to freeze up and need either a greasing or replacement. I do suggest automatic locking hubs that you don't have to turn yourself. You can get the part almost anywhere

Posted on Sep 30, 2009

  • 11 Answers

SOURCE: i have a 1996 ford ranger. my 4 wheel drive wont

If your sure it is acually going into gear than check the auto hubs, they go bad alot. also you can with help from a 2nd person jack the truck up all 4wheels put the truck in 4x4 and drive and see if both drive shafts spin if they do its the hubs if the front one doesnt, its the transfer case

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my hubs for my 4 wheel drive lock in?


try to jack it up before trying to lock hubs, you should feel the hub click into place,

Sep 02, 2014 | 2005 Ford F-150

1 Answer

I have a 1990 dodge w 250 I lock it in to wheel drive and lock the hubs in when it snowed and put it in first and let the clutch out and the drive shaft spins and the axles spin but wont pull what could be...


My first impression is the hubs are not engageing. Make sure that they are in fact working and haven't seized up or that you havent mis read the sign and in fact disengaged the hubs

Jan 26, 2013 | Cars & Trucks

2 Answers

Front drive shaft not fully engaged in 4WD, with truck on stands all 4 wheels do rotate but if i stop front wheels the front drive shaft is not engaged


Hi,
Do you have auto locking hubs on the front wheels, or manual locking hubs?
If you have auto locking hubs chances are they are not engaging properly and will need to be removed and spline sets checked for broken teeth on locking hub and locking shaft.
If you have manual locking hubs then check that they are firm when turning to engage them in the lock position.If they are light when engaging them to the lock position then they my have broken/worn out the locking hub and spline. Also check that the engaging spring inside the hub has enough tension to engage the hubs they may be broken. If the hub are all ok then you have a problem in the transfer box, where the 4WD lever is not meshing the transfer box properly. Hope this helps, let me know how you get on.

Jason

Apr 04, 2010 | 2002 GMC Sierra C/K1500

3 Answers

2004 F150 WILL NOT GO INTO 4 WHEEL DRIVE


the first thing to do is to have the trany computer scanned for codes, the code will help alot in pin pointing your problem,you can try autozone they scan for free, these trucks that ive worked on.one had a bad 4wd transfer case selector motor, and another had bad front wheel locking hubs, these hubs are vaccum operated and go bad often the diafram rips on most of them.

Mar 01, 2010 | 2004 Ford F150

1 Answer

I have a 1998 Ford Ranger 4X4. The 4X4is not working. The light on the dash is lite up and the front axile to the front differential is in gaged but the front wheels spin freel like they are not getting...


If you are seeing the front drive shaft turn,Then it is in four wheel drive,
Your truck has automatic lock in hubs,The most common problem with Rangers is that the lock in hubs get worn and wont keep the axle engaged to the wheel,
If you go to Auto zone they have new lock in hubs for around $50.00
Or you could up grade and get hubs that you manually turn and lock in.

Dec 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

Four wheel drive lights come on but no four wheel drive


The light comes on indicating that the transfer case is engaged in 4wd, but that doesn't mean the hubs are locked. If you have automatic locking hubs, you should check to make sure they are working correctly. This GM vehicle may be equipped with vacuum locking hubs... meaning there is a vacuum line running from the transfer case selector to the hubs on each side. The vacuum makes the hubs lock into place. If those vacuum lines are damaged or missing, they wont lock. If you have electronic locking hubs, they may need to be replaced. Good luck.

Dec 09, 2009 | 1997 Chevrolet Blazer

2 Answers

I have a 2000 4wd tacoma with manual locking hubs and the 4wd does not seem to be engaging after locking the hubs and shifting the lever into 4 hi or 4 low


Sounds like one of your hubs is sticking and not engaging. You can check them by engaging the hubs and the transfer case and jacking up each front wheel independently if it doesn't spin your good, if it does you found your problem. As far as fixing a hub goes, it may be just dry and need some grease, or there are some very good aftermarket hubs available from Warn.
Hope this helps

Dec 08, 2009 | 2001 Toyota Tacoma

2 Answers

Transfer case locks into low gear but front wheels do not pull


You have to have your front hubs locked in for four-wheel drive to work

Jun 10, 2009 | 1992 Jeep Wrangler

1 Answer

4 WHEEL DRIVE DONT WORK


first off your heater dial swithc is buggered. and as for the four wheel drive is it all electric diff locks or do you have to get out and lock hubs in etc?

Dec 22, 2008 | Nissan Titan Cars & Trucks

Not finding what you are looking for?
2004 Ford F250 Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...