Question about 2004 Jeep Grand Cherokee

Open Question

Windshield washer not working

Washer fluid is full but does not spray on windshield - wipers work fine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
fyrebyrd1
  • 121 Answers

SOURCE: windshield wiper pump not pumping

Might be a blockage in the hose coming from the pump to the washer nozzles, or the nozzles themselves. Hose might be kinked as well. I'd try to trace and disconnect the hose at the pump, and at each connection to see if there is fluid running through them when the washer is activated. Certain types of washer fluid will evaporate and leave deposits that could potentially clog the system. Could get a little messy, but washer fluid is harmless unless you get it in your eyes. Maybe start with that, cause I can't see an '02 model vehicle having a bad washer pump. Then again anything's possible, but if you can hear the pump running, that's where I'd start. I hope this helps

Posted on Dec 10, 2008

Ad
picatudo
  • 239 Answers

SOURCE: 2000 Jeep Cherokee Sport, window washing does not work

the little pump inside the washer fluid reservoir is bad, replace it

Posted on Dec 28, 2008

  • 7 Answers

SOURCE: 2000 Jeep Cherokee Windshield Washer

You have a motor for the front and rear washer. Check the fuses. If the intermitted wipers does not work, there is a relay under the dash near the steering colum that needs to be replaced.

Posted on Jan 01, 2009

  • 6982 Answers

SOURCE: My 2005 Jeep Grand Cherokee's windshield washer is not working.

Check power at the pump motors. You may not see a fuse because some run off a circuit breaker. If all else fails, a bit "backyard" but you likely could break out the washer pumps from the system and make a simple push button on the dash to operate them.

Posted on Jul 08, 2009

wracefans24
  • 1985 Answers

SOURCE: Windshield Washer Fluid does not come out.

if your wipers work it is not a fuse,
if you cannot hear the pump humming when you push the wash button you will need to replace it,they are around $20.00 at Autozone

Posted on Jan 12, 2010

Testimonial: "Thanks a ton - I will pick one up tomorrow"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windshield Solvent doesn't spray.Wipers work. I can blow air thru lines.But no spray..any suggestions? 1995 Chevy Luminia


Does the pump motor run when turn windshield spray?
Might be home in line.
Might be wrong fluid(too thick)
Might be wiper fluid motor broken.

Nov 03, 2016 | Cars & Trucks

3 Answers

My 2006 Dodge Dakota windshield washer fluid does not spray. I checked the washer pump and it works. The fuses are all good. And the wipers work. When I press the windshield washer button inside the truck...


If the pump works, something should be flowing thru the hose to the spray nozzles.
And if the pump works, everything electrical is working.
How do you know the pump works ?

Apr 14, 2013 | 2006 Dodge Dakota

1 Answer

Neither front nor rear windshield washer fluids are spraying.


Hey Barry, go to your local O'Reilly's, Autozone, or Advance Auto and tell them your issue and ask them for their recommendations..... they WILL help you and it will be much easier than listening and trying to understand what I (or anyone) says on here..

Sep 11, 2017 | 2009 Chevrolet Equinox

1 Answer

1999 BMW 323i wiper fluid is not spraying. Wipers work fine and I did check the fluid level which is full.


When you turn on the washers do you hear the pump running? if so the nozzel could be plug at the windshield or a break in ght hose. If you do not hear the pump running the washer pump could be faulty.

Jan 26, 2011 | 1999 BMW 323 Series

1 Answer

My windshield washer fluid won't spray. I filled the resevoir today but I don't think it was empty My windshield wipers work just fine


You have a sensor on your washer fluid system. Make sure it hasn't been unpluged. It might not be getting voltage.

Jan 10, 2011 | 2006 Chevrolet Impala

2 Answers

My wiper will work but it will not spray washer fluid anymore. Any suggestions?


CHECK WIPER FLUID LEVEL FIRST ALL IS GOOD CHECK FOR POWER AT WIPER WASHER PUMP MOTOR.IF NO POWER AT WIPER WASHER MOTOR.CHECK 15 AMP FUSE IN THE ENGINE COMPARTMENT FUSE RELAY BOX.IF YES YOU ARE GETTING POWER AT WIPER WASHER MOTOR.WIPER WASHER MOTOR FAULTY.

Dec 31, 2010 | 2004 Chevrolet Suburban

2 Answers

Windshield washer stopped working,wiper work fine,audi a4 cab


make sure you have plenty of washer fluid.if all is good.have some one turn on ignition and on turn on wipers washer motor. if you hear washer running look for kinked damage or disconnected hoses.also make nozzles not cloggeg up.if so you can use a pin or paper clip to un stop it.if you dont .hear no washer running check for electrical power.if yes replace washer.it not.check switch and wires.

Jul 25, 2009 | Audi Cabriolet Cars & Trucks

1 Answer

Windshield wiper sprayers


You seem to have the motor not working or there is not any power going to the washer pump motor. Check the fuse in the box first.
Ken S.

Mar 23, 2009 | 1994 Toyota Corolla

2 Answers

Wiper fluid level sensor replacement


Reservoir —Windshield Wiper

Removal
  1. Remove the RH wheel; refer to Section 204-04 .
  1. Position RH splash shield aside.
    1. Remove six screws.
    1. Remove three pin-type retainers.
    1. Position RH splash shield aside.
  1. NOTE: Windshield washer fluid should be collected in a container after the windshield washer hoses are disconnected.
    Disconnect the electrical connector and washer hoses.
  1. Remove the upper reservoir bolt.
  1. Remove the windshield washer reservoir.
    • Loosen the two lower reservoir bolts.
------------------------------------------------------------------------------------

Jan 15, 2009 | 2000 Mercury Villager

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...