Question about 2000 Ford Taurus

1 Answer

My 06 taurus remote start stopped working along with remote door locks. i reprogramed the remote according to manual. this worked then it stopped working again. tried reprograming again now it doesnt work. temps in the teens. be nice to have it work again.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 3,103 Answers

Ummm does the remote have good batteries in it (sorry have to ask) most remotes need good power to send signals any distance and sometimes the signal will reflect off shiny surfaces and confuse the remote..are you shooting thru a window? thats fogged up? moisture will cause a drop in signal clarity(to includ the car windows and sheet metal as well. good luck and repost please..

Posted on Jan 17, 2013

  • alan butler Jan 17, 2013

    yea. new battery installed. remote unlocks doors & trunk but wont lock doors or remote start car

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: 2001 Ford Taurus door locks

The electric motor that pulls the lock button up and down has failed, you will need to pull the door panel to replace it. Yes it is fairly common.

Posted on Oct 08, 2008

  • 30 Answers

SOURCE: 1999 focus key fob doesnt work changed battery and

turn key on and off eight to ten times and door locks should lock then unlock
push and button on keyfob

Posted on Mar 11, 2009

  • 7 Answers

SOURCE: how to reprogram key pad on door on 97 explorer

enter original code then press #1 enter new code and press #1 again

Posted on May 26, 2009

redbeard00
  • 957 Answers

SOURCE: Power locks won't work from remote

No you dont have to reprogram the remotes. Please give as much info as you can about the problem. What is working and not working. Is every other function working with the unit. Is this an after market autostart or OEM (from FORD) or is it one of the vehicle security systems?

Posted on May 28, 2009

eldorondo
  • 79 Answers

SOURCE: I have a 2008 ford

cycle your ignition 8 times on and off really fast then on the eight time you cycle the door locks should lock and unlock,then hit the lock and unlock button on your fob that should set it just for one car. if you try to reset the fusion key your dealer will charge you alot of money

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I locked my keys in my 06 mercury mariner and i need to reset the code to my car, how can i reset the code?


You must have all remote entry transmitters (maximum of four) available before beginning this procedure. According with the Mariner Owners Manual check this procedure to reprogram the remote entry transmitters:

1. Ensure the vehicle is electronically unlocked.
2. Put the key in the ignition.
3. Turn the key from the 1 (LOCK) position to 3 (RUN).
4. Cycle eight times rapidly (within 10 seconds) between the 1 (LOCK) position and 3 (RUN).
Note: The eighth turn must end in the 3 (RUN) position.
5. The doors will lock, then unlock, to confirm that the programming mode has been activated.
6. Within 20 seconds press any button on the remote entry transmitter.
Note: If more than 20 seconds have passed you will need to start the procedure over again.
7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.
8. Repeat Step 6 to program each additional remote entry transmitter.
9. Turn the ignition to the 1 (LOCK) position after you have finished programming all of the remote entry transmitters.
10. The doors will lock, then unlock, to confirm that the programming mode has been exited.

Note: If all remote entry transmitters are not present during the programming procedure, the missing transmitters will not work with the vehicle following programming.

Hope helps.

Sep 07, 2011 | 2005 Mercury Mariner

1 Answer

I have a 2008 ford fusion along with 2002 ford taurus. Just for the testing purposes I was trying to program the taurus keyless remote into the fusion, and now the single keyless remote is working on both...


cycle your ignition 8 times on and off really fast then on the eight time you cycle the door locks should lock and unlock,then hit the lock and unlock button on your fob that should set it just for one car. if you try to reset the fusion key your dealer will charge you alot of money

Sep 26, 2010 | 2008 Ford Fusion

1 Answer

Remote for my car not working.


Reprogram the Key FOB
Look in owners manual ,on how it is programmed

May 06, 2010 | 1999 Ford Taurus

2 Answers

My keyless remote stopped working. One key won't start car at all. With the other key w/ keyless remote you can manually unlock doors & trunk with key & will start car but can't use the lock/unlock...


Hello. You are correct, the dealerships usually do charge over one hundred dollars. There are a few internet stores where you can get the same programmable fob for so much less. Here is one that I have used and been happy with
http://remote-superstore.com/
Regards, Joe
ps - please rate my answer as helpful. Thanks. J.

Feb 13, 2010 | 2000 Ford Taurus

1 Answer

Remote not working, why


Sometimes they just stop working, idk why, sometimes the battery dies. Try this: lock the doors with the switch in the car - turn the from off to on without starting the car eight times ending in the on position - the locks should unlock then lock themselves - then press unlock on the remote - the lock should unlock - turn the key to off and remove then try the remote again. If nothing happened, replace the battery and try to program again. if that doesn't work, get a new remote.

Aug 14, 2009 | 2006 Ford Taurus

1 Answer

Ford 2000 Taurus, Keyless entry remote no longer works. Changed battery no luck. Tried reprograming and found door locks did not cycle open closed. Could not go further. Any ideas? Thanks, Al


I have a 2000 ford Taurus and my keyless remote has stopped working and having problems with key unlocking the door from outside, none of the remote work do u have any idea what my problem could be ?

Jul 30, 2009 | Ford Taurus Cars & Trucks

2 Answers

Honda Accord doors lock and unlock randomly


I have the same problem.My Accords door unlock when I am turning left above a certain speed.Have you been able to resolve the problem?

May 31, 2009 | 2003 Honda Accord

1 Answer

The key of my honda 2006 does not work upon pressing lock and unlock button. I need to insert the key to the principal door to lock all the doors and activate the alarm. The trunk is locked as well. Any...


the key fob remotes need to be reprogramed or have the battery checked... make sure to have all key fob remotes present when reprogramming...

Apr 06, 2009 | 2006 Honda Accord

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

Not finding what you are looking for?
2000 Ford Taurus Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...