Question about 1992 Oldsmobile Cutlass Ciera

Open Question

How to change radio from am to fm - 1992 Oldsmobile Cutlass Ciera

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i tune Mazda Demio (2004 model) radio to Southern African frequencies?


fm frequencies are just that fm frequencies ( not japanese, chinese ,english or anything else
it is a range of frequencies in the fm band that local stations broadcast on
so all you have to do is to turn the tuner knob until you get 107 fm
so as you turn the knob you will loose 89 and it will go probably 90.5 , 100.20, 102.7 etc and if there is a station broadcasting that your radio will pick up it will come in and then fade out as you keep moving the knob
you may have to change the mode as there are fm 1 ,fm 2,fm 3 bands to get your fm 107 as it will depend on what megahertz 107 is operating on

Oct 05, 2015 | Mazda Cars & Trucks

1 Answer

I had my tpms sensor changed and my battery tested on my 2010 chevy hhr and now my fm stations on my radio do not work, can you tell me why and how to fix it. thank you


I BELIEVE THE FM PROBLEM IS IN THE RADIO, NOT RELATED TO OTHER WORK...HAVE RADIO TESTED, PULLED, AND REPAIRED/REPLACED

Nov 24, 2014 | Cars & Trucks

1 Answer

2003 bmw 525i radio


have the radio checked out as the band change switch is not working. Try going into the mode /menu section of the radio and adjusting it there . Changing antenna does nothing as the radio works on either band with the same antenna

Nov 20, 2013 | Cars & Trucks

1 Answer

Change fm TO AM (MW)


What is the car year and model there? Sometimes just need "push" volume or tuning button.

Aug 20, 2012 | Cars & Trucks

1 Answer

Changed battery now radio will work on am only when i push the am/fm button the display reads set1


When you replaced the battery, it reset the radio. You will need to reprogram the radio stations you want on fm. Find the radio station you want and then press the set button on the radio and then the corresponding number on your radio (ie: set1, set2, set3, set4 or set5)

Feb 27, 2011 | 1995 Jeep Grand Cherokee

3 Answers

How to fix fm japan radio to recieve GCC fm signals ?


You can get a converter like this one.

http://catronics.com.au/fmconverter.html

It's a simple solution and it works.

Jan 18, 2011 | 1998 BMW 5 Series

2 Answers

I just got a Jabra Cruiser and need to change the radio frequency to 88.1. Does anyone know how to do that? Thank you!


All that means is to put your radio on FM 88.1, and just wait. Jabra will find the exact frequency (mine is 88.7) and then it will work. When you want to use it to listen to music, just put the radio on 88.1 .

Dec 26, 2009 | 2008 Subaru B9 Tribeca

2 Answers

The AM/FM radio in my 2003 cadillac CTS faded to only static


check antenna cable connections at radio & antenna.suspect power antenna if equipped.

Sep 30, 2009 | 2003 Cadillac CTS

2 Answers

Radio switches between AM, FM, and CD


Check fuse no. 18(20 amp) in the under dash fuse panel. This is the fuse that keeps power to radio at all times to keep memory alive.

Feb 04, 2009 | 2006 Ford Fusion

2 Answers

Radio code


If you don't have the radios security code, you can try entering 1111 as some replacement radios were coded with this security code. Your local Audi Dealer may be able to provide the correct security code for your vehicle, if you provide them with your vehicles Identification Number (VIN). This VIN is typically located on the drivers door pillar.

The radio should have a serial number on the unit which also can be given to the Audi dealer and checked in their data base of radio security codes. The serial number will start with AUZ, one radio serial number for example is AUZ1Z9A1965412.

To enter the code on the Wiesbaden Radio: Turn on the radio, SAFE should be displayed.
Push and hold the AM/FM button, then while holding the AM button down, push and hold down the SCAN button. Release the AM/FM and SCAN buttons, and the display should show 1000. Now enter the correct code using the radio pre-set station buttons (1-4). Button 1 changes the first digit in the code "1"000, Button 2 changes the second digit in the code 1"0"00, button 3 changes the third digit, button 4 changes the last digit in the code. In most cases the first digit is a 1 and won't need to be changed. You push each pre-set station button multiple times to step through the digits (1-9) to get the correct code displayed.

Code 1246 would entered by pushing button "2" two times, pushing button 3 four times, and pushing button 4, six times.

After entering the correct security code, push and hold down the AM/FM button, then while holding down the AM/FM button, push and hold down the SCAN button. The display will then show SAFE, release the two buttons, and now the radio should play correctly.

Sep 19, 2008 | 2001 Audi S4

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...