Hello, I'm sending you exploded view of the glove box and the in cabin
micro filter cover illustration. Remove the two upper screws on the
glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door.
Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the
filters are facing in the direction indicated by the direction arrow
for the airflow. Direction arrow is printed on side of in cabin micro
Install in cabin micro filter cover. Reinstall glove box.