Question about Cars & Trucks

Open Question

Where is spark plug on Bombardier outlander 2004

Cant find location of spark plug

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: cant find spark plugs

To do the job to factory specs, you'll also need a torque wrench--a little 3/8" drive one that can handle 8-20 N-m and will fit in tight spaces is the way to go--some anti-seize compound for the spark plug threads, some silicone grease for the O-rings on the coils, and a source of compressed air. I really needed the compressed air. There was a bunch of dirt in the rear plug holes on both sides I wouldn't have wanted in my engine. 

To get access to everything, remove the 10 mm bolt on either side of the resonator, release the four spring clips on the air filter box, release the the air filter box cover from the hooks on the engine side, then lift the front of the resonator to remove the plastic pin from the rubber grommet at the front of the resonator and work the resonator out of the rubber gasket that connects it to the throttle body. There is no clamp holding the resonator to the throttle body gasket, it just has a friction fit. Set the whole resonator/hose/air filter box top assembly aside. Stuff a clean shop rag in the throttle body gasket to keep dust from blowing into the throttle body. Remove the air filter and put it in a clean spot for the same reason. You may want to remove the left hand Allen screw on the resonator bracket and loosen the right hand screw so you can swivel the resonator bracket up out of the way to access the #1 coil nut with a socket. 

Do one coil/plug at a time so there is no way you can drop a part in a cylinder! Unplug the connector to the coil by pushing down on the release on the top of the plug and sliding them out of the coil. 

After removing the 10 mm nut that holds each coil in place, use compressed air to blow out all the dust around the coil, then remove the coil (pull up gently with a little twisting motion back-and-forth) and blow all the dust around the spark plug out so you don't get anything nasty down in the cylinders. 

Your OEM plugs are NGK ZFR6F-11G, gapped at 0.042-0.044, Use the anti-seize compound on the spark plug threads so you can get them out next time. Finger-thread the plugs until they are snug, then torque them to 20 N-m.

A thin coat of the silicone grease goes on the O-ring on the coil to make it easier to install in the cylinder head and to make the O-ring last longer. Install the coil on the plug, then put the 10 mm nut back on to fasten the coil down. Torque the coil nut to 8 N-m. Re-connect the connector, and go on to the next plug.

If you have the right tools, this job is easier than doing it with an old distributor/plug wires setup, and the whole thing will cost you less than $20 including the plugs, the anti-seize and the silicone grease. 

Good luck and hope this helps

Posted on May 25, 2009

  • 333 Answers

SOURCE: Change spark plugs

Remove the intake baffle if equipped (5 10mm screws), then remove the coilpacks/wires (10mm bolts), then remove sparkplugs (use 5/8" socket)

Posted on Sep 10, 2009

ftw1952
  • 10319 Answers

SOURCE: How can i find out what the right kind of spark

here is a website with your spark plug as needed for your model

http://catalog2.genpt.com/catviewer15/(tgqwfq45qqa3yz45vldbws55)/Catalog/DetailBG.aspx?ShowPics=1&R=NGK7162_0068411157

Posted on Jul 04, 2010

  • 1 Answer

SOURCE: Where are the spark plugs

spark plugs are under valve cover. Each plug has its own coil pack module. Plug is under this. Be ware, factory plugs may have to be ordered ( $ 15 - 20 ea.) , depending on parts stores in your area. here in Canada, some stores had wrong computer listings for all brands of plugs for this car!! The factory plugs are NKG Iridium, and are longer than conventional plugs!! I'm about to change mine ( 160000 KM's).Looked at plugs cpl mths ago, didnt look too bad. Hope to get another 160 K's from new ones ! Good luck .!

Posted on Sep 24, 2010

  • 7 Answers

SOURCE: How do I change the

remove the cover written GDI remove the coil packs take a normal spark plug sucket an grind it down till its able to pass thru the hole

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10' canam outlander 650, keeps blowing injector fuse. Check engine, DPS, and low batt amp warning comes on first, any ideas? Doesn't restart with out jump and new fuse.


amp blowing fuses ' High Lifter Forums

forum.highlifter.com > ... > [Most Popular Discussions] > ATV Accessories
Dec 31, 2007 - 2006 Can-Am Outlander 650XT Bombardier ... RE: amp blowing fusesMonday, December 31, 2007 10:31 PM (permalink). I want to use an ...

Aug 30, 2015 | Cars & Trucks

1 Answer

2003 bombardier outlander blew spark plug out of head . Threads are stripped what are my options.


What you need to do is install a time cert thread replacement. DO NOT use a helicoil, as it will not survive the heat.

You will want to have the head off for this repair, as chips will fall into the engine.

Sep 06, 2012 | Cars & Trucks

1 Answer

WHERE ARE THE SPARK PLUGS LOCATED ON A 2004 MITSUBISHI OUTLANDER


they are under the black plastic air box.there you will see 4 coils held down by one bolt each take them out and down inside are the spark plugs .

Jun 26, 2011 | 2004 Mitsubishi Outlander

1 Answer

How do I change the spark plugs in a 2004 Mitsubishi Outlander with a 2.4 liter engine


remove the cover written GDI remove the coil packs take a normal spark plug sucket an grind it down till its able to pass thru the hole

Feb 14, 2011 | 2004 Mitsubishi Outlander

2 Answers

Where are the spark plugs located on a mitsubishi outlander 2004?


spark plugs are under valve cover. Each plug has its own coil pack module. Plug is under this. Be ware, factory plugs may have to be ordered ( $ 15 - 20 ea.) , depending on parts stores in your area. here in Canada, some stores had wrong computer listings for all brands of plugs for this car!! The factory plugs are NKG Iridium, and are longer than conventional plugs!! I'm about to change mine ( 160000 KM's).Looked at plugs cpl mths ago, didnt look too bad. Hope to get another 160 K's from new ones ! Good luck .!

Aug 18, 2010 | 2004 Mitsubishi Outlander

1 Answer

How do I change the spark plugs in a 2003 Outlander


1.cool off engine
2. remove spark plug high tension cord from the spark plugs.
3. remove spark plugs using a spark plug socket wrench by turning it counter clockwise
4. install new spark plugs and high tension wires...

Apr 07, 2010 | 2003 Mitsubishi Outlander

3 Answers

How do i change the fuel pump on a 2004 chevy cavalier?


you will have to drop the fuel tank ,remove the straps while supporting tank,remove fuel lines and vent lines,lower to ground ,remove ring that holts pump ***. in tank.Be certain to change filter and strainer

Mar 26, 2010 | 2004 Chevrolet Cavalier

1 Answer

Change spark plugs


Remove the intake baffle if equipped (5 10mm screws), then remove the coilpacks/wires (10mm bolts), then remove sparkplugs (use 5/8" socket)

Jun 17, 2009 | 2004 Mitsubishi Outlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...