Question about 2003 Toyota Tacoma

Open Question

INSTALL TOYOTA TACOMA BLOCK HEATER - 2003 Toyota Tacoma

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Toyota tacoma heater fan runs slowly in the 3rd & 4th positions

Using a voltmeter, the resisted voltage values for the fan motor are as follows:
LOW- 3 VDC
Med LOW - 6 VDC
Med HIGH - 9 VDC
High - 12 VDC

The fan resistor gets 12 volts from each position of the fan switch, and the 12 VDC is then lowered thru each of the 3 internal resistors inside the fan resistor. My guess is that the resistor has failed, and the resistance wires contained on it may have meshed together. The resistor is on the black box between the blower motor housing and the center of the dash. 2 phillips screws hold it in. Easy to remove/replace. Hope this helps, and thanks for choosing FixYa.

Posted on Nov 24, 2008

Ad
  • 5 Answers

SOURCE: need plug wire schematic for 2000 toyota tacoma

REMOVE THEM ONE AT A TIME THIS WAY YOU DONT GET THEM MIXED UP.

Posted on Mar 19, 2009

  • 64 Answers

SOURCE: pl. let me know how to install block heater in Toyota Corolla 200

If it is magnetic, sometimes the best thing to do is to mount the heater on the underside of you oil pan. This heats the oil and warms the engine after you start the car much faster.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of freeze plugs on 92 toyota 4-runner sr5 3.o


They will be on the lower block under the manifolds a few inches, they will be about 1.25 inches in Diameter and recessed into the block, If you have a block heater in your truck just follow the cord back, when they install a block heater they remove a frost plug and install the heater in the hole in the block.

Feb 28, 2015 | 1992 Toyota 4Runner

1 Answer

Replaced heater coil,radiator,thermostat on 1998


-Make sure the heater valve close and open properly.


Good Luck

Mai Lor

Oct 20, 2014 | 1998 Toyota Tacoma

1 Answer

1999 toyota tacoma heater wont turn off


You may just need to replace the temperature control unit. You can find used ones online for pretty cheap.

Nov 07, 2013 | 2001 Toyota Tacoma

1 Answer

1995 Tacoma heater works only in recirculation mode


Hi, 2 possibilities exist.
1)The heater tap could be seized - to locate, follow the heater pipes that go tthrough the firewall back towards the motor, One of these will have a block on it with an arm and cable connected to it, check that the arm moves freely
2) the thermostat could be stuck open - this involves a bit more work to fix

Dec 08, 2012 | 1995 Toyota Tacoma

1 Answer

Low and medium heater blower inoperative on 2006 toyota tacoma.


Resistor blown in heater. Follow the wires from the heater motor ( in foot well ) to a plug in the ducting between the fan and main heater body in centre of car. Unplug and remove the plate , it should be held in by a couple of screws. The plate should have a couple of wire coils of which , a couple will be broken. Replace resistor and heater should work.
Happy heating Marshall

May 05, 2010 | 2006 Toyota Tacoma

1 Answer

Thermostat location in 2001 toyota tacoma


follow the lower radiator hose to from the rad to the engine block it is on the engine block side of the hose it should have 3 12mm nuts if its a v6 or 2 if its a 4 cylinder

Mar 02, 2010 | 2001 Toyota Tacoma

1 Answer

Working on a 98 toyota tacoma v6 4wd 3.4l eng. I


Yes,need to make sure crank is at TDC as well

Oct 09, 2009 | 1998 Toyota Tacoma

1 Answer

Which fuse is the cabin fan for heater and air conditioner for 2005 toyota tacoma. 4 cylinder.


The 50 amp "Heater" fusible link. located in the engine room relay block.

Sep 13, 2009 | 2005 Toyota Tacoma

1 Answer

How to replace heater fan 2005 tacoma toyota


Under the dash, under the glove box, you will find the heater motor. Unscrew the 3 retention bolts, and the motor drops straight down. Easy to change.

Jun 06, 2009 | 2005 Toyota Tacoma

Not finding what you are looking for?
2003 Toyota Tacoma Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...