Question about Ford Taurus

Open Question

1992 Ford Taurus blowing 60 amp fuse when trying to start, but not all the time

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

280zlvr
  • 126 Answers

SOURCE: EEC fuse: 1992 ford explorer

sounds like you have a bad relay that is shorted out or you might have a bad fuel injector shorting out fossible fuel pump wireing short do some probing aroun with the multi meter try to find direct short , use the process of elimination .
now let me see does your truck start up and run then fuse blows? is the fuse the correct amperage check your owners manual to see how long does it run before blowing fuse ? when its running is it running smooth while is running?

Posted on Jul 11, 2008

  • 130 Answers

SOURCE: 1999 Ford Taurus fuse box

It should use fuse location 22. The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided in the fuse panel cover.

The black wire is always the ground. Ford used an assortment of color stripped wires for positive.

Posted on May 03, 2009

tneubauer
  • 437 Answers

SOURCE: 1993 Ford Taurus brake light fuse keeps blowing

Look for a short on the LG/R wire coming out of the BOO (brake on/off) switch.

Posted on Jun 06, 2009

  • 1 Answer

SOURCE: ford f350 diesel truck 30 amp fuse keeps blowing.

It is the fuel heater, All you have to do is unplug it.a4c0d50.gif

Posted on Jan 06, 2010

Testimonial: "Thanks for the diagnosis. It's disappointing that our local Ford service will not advise to help get it running, even to make it in for service."

  • 1206 Answers

SOURCE: window relay on 1998 ford taurus clicking sound

check the fuses in the car under the dash on driver side ,only other thing it could be is the power wire in the driver door jam could have a broken ground that is one way it would affect all the windows.

Posted on Jan 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse 18 keeps blowing


Once a fuse blows,it does so for a reason
Common Sense
In a 60 year driving career you have maybe 6 fuses blow
Replacing them 5 out of 6 time they blow again
Ask yourself why
You need to find the most logical item in that circuit
& start testing & that usually requires a wiring diagram
or you have no map or now where to start any testing.
Something overloaded a circuit find it & replace it or
resolve the wiring issue

Aug 03, 2013 | 1994 Ford Mustang

1 Answer

1992 ford explorer keeps blowing 60 amp ignition fuse?


sounds like you need to replace your mittenspickle.But first you should take a safety break.I find this usually helps.

Nov 21, 2010 | 1992 Ford Explorer

1 Answer

Starter relay, ignition switch 40 amp fuse blows when starting


On my 2000 ford taurus the starting system white/pink line went to the transmission range sensor or(neutral saftey switch), It was the switch that was intermittantly shorting the starting circuit.

Sep 14, 2010 | 2003 Ford Taurus

2 Answers

Put in new alternator 98 ford taurus dohc car will start thn stop


Check ground wire from engine to frame and battery to body

Jul 23, 2010 | 1998 Ford Taurus

2 Answers

Trying to install a new stereo in a 92 ford taurus and the dome light blew. i don't have an owner's manual to check for which fuse it is and the fuses location. i changed the bulb but still nothing. can...


fuse should be located under the stering wheel or in ur split box under the hood ur gonna have to find wich one i blown make sure u have the car off for all electrical repairs and wireing untill completely finished or u risk blowing fuses and other electrical components

Apr 04, 2010 | 1992 Ford Taurus

1 Answer

My taurus keeps blowing meaga fuse even after changing alternater and alternater wire what could be the problem


It really sounds like a major short in the wire going into the mega fuse box. I would just start tracing the positive wires ,I would start at the starter and work my way to the alternator, battery ,and fuse box. It takes a lot of current to blow one of those 60 amp fuses so I would expect to be one of the thicker wires causing the short and you will probably see arc marks where the wire touched the frame causing the short. Well I hope this can help you out.

Feb 24, 2010 | 2000 Ford Taurus

1 Answer

FUSES KEEP BLOWING FOR THE DASH AND TAIL LIGHTS


your lights are grounding out some where you will have to check for a dead short in the wiring use a volt meter in the resitance mode and track through you power side of the lights untill you find your dead short, start at the back and work your way to the fuse box pull the fuse and follow the wire. there is a short in it it will just take some time going through look for worn coating, cracks, or melted.
good luck & and happy hunting

May 16, 2009 | 1988 Ford Taurus

1 Answer

1992 Ford Taurus


I had that problem and found my inside dimmer switch to be touchy. You might try adjusting the dial.

Mar 24, 2009 | 1992 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...