Question about Hyundai Getz
Intermittant acceleration problem garage diagnostics reveals nothing no warning light on dashboard
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: P1403 DPFE
this basically means the EGR valve has been wrongly connected, the hose is partially off or is faulty, also the hoses like to block up with a carbon build up wich will cause the valve to stay partialy open giving you a poor idle
Posted on Oct 09, 2009
Testimonial: "Thanks bob nowwhere is it?"
Read the owners manual or call the V.W. service department. sound like you need to clean the filter. If you ignore the warning more then 3x you will cause damage and it will be costly.
Posted on Apr 25, 2009
If it says "airbag" on the stering wheel AND on the dash in front of the passenger,then it has a passengers side airbag.
Children are much safer in the back seat in the event of a collision.
Posted on Jul 02, 2009
hi from uk ! to set clock/time on getz look t the speedometer ? you will see two buttons on the bottom of dial ? the left button is to cancel the trip meter by pressing button in for trip A and again for B trips the right hand button marked hr + min ? to set hour time turn to left untill hr time is shown then release now turn button to right to set the minutes then releas when time/minutes ar correct that is it! ps you cannot cancel the odometer/milage clock only trip meter hope this helps best wishes from n/west uk
Posted on Oct 16, 2009
Testimonial: "Thank you very much, your instructions were perfect :)"
Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.
Posted on Nov 04, 2009
Tips for a great answer:
May 14, 2014 | 2005 Hyundai Getz 1.6
Dec 28, 2013 | Cars & Trucks
Jul 04, 2012 | Hyundai Cars & Trucks
Jan 19, 2011 | Hyundai Accent Cars & Trucks
Dec 07, 2009 | 2008 Hyundai Elantra
Nov 14, 2009 | 2006 Hyundai Accent
Oct 28, 2009 | 2001 Hyundai Accent
Apr 02, 2009 | Hyundai Motor S Cars & Trucks
Mar 30, 2009 | Hyundai Motor 2004 Accent
127 people viewed this question
Usually answered in minutes!