Question about Peugeot Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
These are dealer only parts, you may be able to find a used one though, go on line and use one of those used part locator services, they are great and you get fairly quick answers and save 1/2 of the price of a new one.
Posted on Nov 08, 2008
SOURCE: I have a 1998 BMW
Wit the door open, using a srewdriver, use it to throw the catch, then see if the latch locks into position. if it doesn't then a new catch will be required as the locking latch spring inside the latch would have broken
Posted on Jan 18, 2009
There are 'star bolts' on the latch, loosen them off, not too much that it' s loose, just tight, close the door lightly, and make sure the door is latched, slowly open the door and tighten the starbolts,
Posted on Nov 15, 2009
SOURCE: timing marks on peugeot 1.9 tdi
there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key
there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel
i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel
the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)
when the hole is inthe right place you can insert a m8 bolt and wind it in to the head
with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully
with this now done your 1.9 tdi engine is timed up
Posted on Dec 07, 2009
Tips for a great answer:
Nov 18, 2016 | Peugeot Cars & Trucks
Aug 10, 2016 | Peugeot 308 Cars & Trucks
Jan 16, 2016 | Cars & Trucks
Feb 27, 2015 | Peugeot Cars & Trucks
Apr 08, 2012 | 2002 Chevrolet Blazer
Jan 11, 2011 | GMC Yukon XL Cars & Trucks
Jan 01, 2010 | 1990 Buick Reatta
Nov 15, 2009 | 2006 Peugeot 405
Dec 06, 2008 | 1998 BMW 5 Series
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: