Question about 2001 Chrysler Sebring

Open Question

How do you reset security ignition system? - 2001 Chrysler Sebring

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset my security on my 1997 pontiac grand prix


Unfortunately there is no resetting. You need to either replace your ignition lock cylinder and have the new ones tumbler pins changed to your original key. Or have your VATSS system bypassed. A stereo shop that installs remote start systems will be able to help you with the bypass.

May 13, 2016 | Pontiac Cars & Trucks

1 Answer

How do I reset the security anti theft system on a 92 buick Rivera


There is no reset on that year's system. There is no reset for VATS. But luckily VATS is so antiquated you can easily bypass it. The security, antitheft or lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://www.diy-gm-security.com/

26142094-uqbjiurxhdzvqcfivne15ehf-5-0.png

Mar 26, 2016 | Buick Cars & Trucks

1 Answer

How do I reset security system on my 2000 Bonneville?


press the helpful button and follow me on fixya for more tips

Put the key into ignition and turn it to RUN position. All dash lights will illuminate. Don't try to start the car. Leave the key in the ignition for about 5-10 minutes or until security light will stop flashing. The car should start after that. Security lock on the Pontiac disables the injectors, so the engine should crank. If it does not, you may want to check ignition switch, fuse and relay for the starter. Try to reset security first. Sometimes the magnet in the ignition lock cylinder gets dirty and needs cleaning. written by AlexGS
If the above procedure does not work the first time, try again, but right at the start insert key in and out of ignition several times to get good contact, as your key or ignition could be faulty.

Passlock III reset procedure reset security system on chevy buick...

https://ca.answers.yahoo.com/question/index?qid=20080809211716AAHluay

Feb 01, 2016 | Cars & Trucks

2 Answers

Whr is my fuel pump reset button on my 2003 grand am? Its security lock, it wont get any fuel. It cranks but wont start. Not getting any fuel. First time ever happening


There is no reset button.
The problem could be the anti-theft system which would knock out the injectors and spark to the plugs.
If the security light is staying on, the problem could be the chip in the key.

Oct 26, 2015 | Cars & Trucks

1 Answer

How do i reset 2010 GMC Yukon XL security system


30 MINUTE RELEARN PROCEDURE
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to start the engine, then release the key to ON, vehicle will not start.
  3. Observe the SECURITY telltale. After approximately 10 minutes, the telltale will turn OFF.
  4. Turn OFF the ignition, and wait 5 seconds.
  5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.
  6. Important: The vehicle learns the password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
  7. Start the engine. The vehicle has now learned the password.
If this doesn't work, it is possible to bypass the security http://vatspasslockpasskeysecurityhelp.yolasite.com/

Mar 24, 2014 | GMC Yukon XL Cars & Trucks

1 Answer

2002 Deville--I started my car with my key #1, drove a short distance. Took that key out and husband tried to start car with key #2. Security system warning came on and car will not start. Is there an easy...


SWITCH IGNITION ON WITH MASTER KEY TO BE PROGRAMMED.TURN ON IGNITION KEY TO ON POSITION.SYSTEM LED SECURITY LIGHT WILL ILLUMINATE.LEAVE IGNITION KEY ON POSITION FOR 10 MINUTES UNTIL SECURITY THEFT LIGHT DISAPPEAR.THEN SWITCH OFF IGNITION SWITCH WAIT 5 SECONDS, THEN START THE ENGINE,THIS WILL HELP YOU FOR A WHILE BUT YOU NEED TO GET THE THEFT SECURITY SYSTEM SCANNED CHECK OUT AT THE GARAGE OR DEALERSHIP.

Apr 04, 2011 | 2002 Cadillac Deville

1 Answer

Ignition switch of a 1994 LeSabre


Take out the fuse labeled AIRBAG/VATS (Vehicle Anti Theft System) and then put it back in.This will reset the security system allowing your vehicle to start.

Jun 23, 2009 | 1994 Buick LeSabre

1 Answer

2004 cts cadillac service security system; key will not come out of ignition and will not go into park How do I reset security system did kra73093 ever get a response?


Has nothing to do with security system. You either have a bad shifter assembly, or a faulty lock cylinder in your ignition switch.

Jun 09, 2009 | 2004 Cadillac CTS

1 Answer

Security light flashing and ignition doesnt work


your ignition switch is bad for now though turn your key on for at least ten minutes until the light stops flashing this will reset your security system after stops flashing turn key off and then start the truck

Mar 17, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

How should I reset the security system?


Ignition key in door unlock twice resets security

Dec 27, 2008 | 1999 Porsche Boxster

Not finding what you are looking for?
2001 Chrysler Sebring Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...