Question about Cars & Trucks

Open Question

117 code starting attempt with locked IFZ accomplished

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

03 Lincoln Navigator - No Door Locks, Auto Lights - Already used process of elimination - missing something - Help!


Simple fix; bring the vehicle to the dealership and let them reprogram the system!

Feb 21, 2017 | Ford Cars & Trucks

1 Answer

I know it is a simple adjustment but I would like to accomplish this with one attempt.


And just what is it that you are trying to accomplish plus on what year make and model of vehicle?

Feb 02, 2016 | Cars & Trucks

2 Answers

Want to buy Nissan juke in Black I live in canary Islands any problems with this colour please


Hi.

Juke in Spain is distributed in the colors shown below. Black is one of Juke's colors. This includes Islas Canarias. Nissan dealers in Canary island are mainly in Gran Canaria or Tenerife: Nissan, Islas Canarias

ginko_130.jpg

Here prices:

DI?SEL
  • 1.5 dCi 110 CV Visia 16.000 €
  • 1.5 dCi 110 CV Acenta 16.950 €
  • 1.5 dCi 110 CV Tekna Sport 17.400 €
  • 1.5 dCi 110 CV Tekna Premium 18.350 €
PETROL
  • 1.6i 16v 117 CV Visia 14.550 €
  • 1.6i 16v 117 CV Acenta 15.500 €
  • 1.6i 16v 117 CV Acenta CVT 16.350 €
  • 1.6i 16v 117 CV Tekna Sport 15.900 €
  • 1.6i 16v 117 CV Tekna Sport CVT 16.800 €
  • 1.6i 16v 117 CV Tekna Premium 16.900 €
  • 1.6i 16v 117 CV Tekna Premium CVT 17.750 €
  • 1.6 DIG-T 190 CV Tekna Sport 17.500 €
  • 1.6 DiG-T 190 CV Tekna Premium 18.450 €
  • 1.6 DiG-T 190 CV Tekna Premium CVT 4WD 21.550 €

Here you can configure your Juke online.

Regards.

Ginko

Aug 11, 2011 | Nissan Juke Cars & Trucks

2 Answers

I have a 99 voyager and the ignition will not turn how do I remove it


Here's a copy of a service bulletin on your problem.

I'll bet the dealer says $300 for parts and 2 hrs labor.:screwy:

Ignition Key - Will Not Turn And/Or Cannot Be Removed
NUMBER: 23-23-00
GROUP: Body
DATE: JUNE 30, 2000
SUBJECT:
Ignition Key Will Not Turn And/Or Cannot Be Removed
MODELS:
1997 - 2000 (NS) Town & Country/Caravan/Voyager
OVERVIEW:
This bulletin involves performing one or any combination of the following procedures; cutting a new ignition key, and/or adjusting transmission shifter cable, and/or replacing the ignition lock cylinder and/or replacing the ignition lock housing and switch assembly.
SYMPTOM/CONDITION:
1. Cannot turn the ignition key when attempting to start vehicle, this condition may be intermittent.
2. Unable to remove the ignition key from the lock cylinder.
PARTS REQUIRED:
AR(1)04778115 Key
AR(1)05003843AB Cylinder, Ignition Lock
AR(1)04690523 Assembly, Ignition Switch and Lock Housing
EQUIPMENT POSSIBLY REQUIRED:
Key Cutter such as Pentastar Service Equipment (PSE) IL-MK1-P2627 or
IL-ECM-100
T-27 Torx Bit
T-25 Torx Bit
T-10 Tamper Resistant Torx Bit
SR-706059 Lock Cylinder Build Kit, Pentastar Service Equipment (PSE)
DIAGNOSIS/REPAIR PROCEDURE:
DOES NOT REQUIRE HOISTS OR OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT. THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLERS MOBILE SERVICE PROGRAM.
SYMPTOM/CONDITION ONE
1. Ensure the steering wheel is centered and the vehicle is positioned on a level surface.
2. Disconnect the negative battery cable.
3. Insert ignition key into the ignition lock cylinder and attempt to rotate the key to the start position and then the accessory position.
4. If the key does not turn, remove the key from the lock cylinder and rotate it 180°. Reinsert the key into the lock cylinder and attempt to rotate the key. If the key does not turn skip to step 14. If the key does turn make a new key.
NOTE: USE THE KEY CODE ON THE VEHICLE INVOICE TO CORRECTLY CUT THE NEW KEY. KEY CODES ARE ALSO AVAILABLE USING THE D.I.A.L. SYSTEM, MAIN MENU OPTION 13. DO NOT USE A KEY DUPLICATOR TO MAKE THE NEW KEY.
5. Insert the new ignition key into the ignition lock cylinder and attempt to rotate the key to the start position and then the accessory position.
6. If the key turns, remove the key from the lock cylinder and turn it over 180°and reinsert the key into the lock cylinder. Attempt to rotate the key.
7. If the key turns, repeat steps 5 and 6 ten times. If the key continues to rotate smoothly the repair is complete. If the key fails to turn smoothly at each rotation attempt, continue to step 8.
8. Remove the ignition lock cylinder using the procedure outlined on page 8D-29 of the 2000 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-0005). DO NOT ATTEMPT TO DISASSEMBLE THE Lock CYLINDER.
9. Build a new lock cylinder to the key code on the vehicle invoice, using the instructions in the Pentastar Service Equipment SR-706059 Lock Cylinder Build Kit.
10. Install the new ignition lock cylinder using the procedure outlined on page 8D-29 of the 2000 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-0005).
11. Insert the new ignition key into the new ignition lock cylinder and attempt to rotate the key to the start position and then the accessory position.
12. If the key turns, remove the key from the lock cylinder and turn it over 180°and reinsert the key into the lock cylinder. Attempt to rotate the key.
13. If the key turns, repeat steps 11 and 12 ten times. If the key continues to rotate smoothly the repair is complete. If the key fails to turn smoothly at each rotation attempt, continue to step 14.
14. Remove the ignition lock housing and ignition switch as an assembly using the procedure outlined beginning on page 19-47 of the 2000 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-0005).
NOTE: SKIP STEPS 13 AND 14 OF THE SERVICE MANUAL REMOVAL PROCEDURE SO THE IGNITION LOCK HOUSING AND IGNITION SWITCH ARE REMOVED AS AN ASSEMBLY.
15. Install a new ignition lock housing and ignition switch assembly, p/n 04690523, using the procedure outlined beginning on page 19-49 of the 2000 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-0005).
NOTE: PRIOR TO PERFORMING STEP 2 OF THE SERVICE MANUAL LOCK HOUSING INSTALLATION PROCEDURE, INSTALL THEN REMOVE THE TWO LOCK CYLINDER HOUSING MOUNTING SCREWS INTO THE LOCK HOUSING MOUNTING HOLES TO CREATE THE THREADS IN THE HOLES.FAILURE TO CREATE THE MOUNTING HOLE THREADS PRIOR TO INSTALLATION TO THE STEERING COLUMN MAY CAUSE MISALIGNMENT OF THE LOCK HOUSING TO STEERING COLUMN AND DAMAGE BINDING OF STEERING COLUMN MAY RESULT.
STEPS 5 AND 6 OF THE SERVICE MANUAL INSTALLATION PROCEDURE FOR THE LOCK HOUSING ARE NOT NECESSARY FOR THIS TSB PROCEDURE.
WHEN PERFORMING STEP 9 OF THE SERVICE MANUAL PROCEDURE USE THE NEW LOCK CYLINDER THAT WAS BUILT IN STEP 9 OF THE SYMPTOM/CONDITION ONE DIAGNOSIS / REPAIR PROCEDURE OF THIS BULLETIN.
16. Insert the new ignition key into the new ignition lock cylinder and attempt to rotate the key to the start position and then the accessory position.
17. If the key turns, remove the key from the lock cylinder and turn it over 180°and reinsert the key into the lock cylinder. Attempt to rotate the key.
18. If the key turns, repeat steps 16 and 17 ten times. If the key continues to rotate smoothly the repair is complete.
SYMPTOM/CONDITION TWO
1. Check the operation of the shift lever. The shift lever should fall freely away from the driver when it is brought up into the Park position.
2. If the shift lever does not seat fully up and away from the driver the column will not allow the key to be removed.
3. If binding of the shift lever is discovered, adjust the transmission shift cable using the procedure outlined on page 21-114 of the 2000 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-0005).

Jun 01, 2010 | 1999 Plymouth Grand Voyager

1 Answer

Door lock not working on the drivers side. 1999 Ford Explorer. Need wiring diagram and how to remove the parts.


Visual Inspection Chart Mechanical Electrical
  • Binding latches
  • Door lock cylinder
  • Misaligned door
  • Lock actuator
  • Fuse
  • Relays
  • Switch
  • Wiring harness
  • Loose or corroded connections
Symptom Chart Condition Possible Sources Action
  • The door lock is inoperative
  • Circuitry.
  • Power door lock actuator (218A42).
  • GO to Pinpoint Test A .
PINPOINT TEST A: THE DOOR LOCK IS INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS A1 CHECK THE OPERATION OF THE SUSPECT DOOR LOCK sxn~us~en~file=box1.gif~gen~ref.gifCheck for binding or stuck conditions by manually operating the inoperative door lock.
  • Is the lock stuck or binding?
sxn~us~en~file=arrow.gif~gen~ref.gifYes REPAIR or REPLACE the binding components. TEST the system for normal operation.
sxn~us~en~file=arrow.gif~gen~ref.gifNo GO to A2 . A2 CHECK THE POWER DOOR LOCK ACTUATOR FOR LOCK OPERATION — CIRCUIT 117 (PK/BK) sxn~us~en~file=box1.gif~gen~ref.gif
sxn~us~en~file=ic0004.gif~gen~ref.gif Inoperative Power Door Lock Actuator
sxn~us~en~file=box2.gif~gen~ref.gif
sxn~us~en~file=gn0085a.gif~gen~ref.gif sxn~us~en~file=box2.gif~gen~ref.gifMeasure the voltage at the inoperative power door lock actuator connector Pin 1, Circuit 117 (PK/BK), and ground while operating the door lock switch to the LOCK position.
  • Is the voltage greater than 10 volts?
sxn~us~en~file=arrow.gif~gen~ref.gifYes GO to A3 .
sxn~us~en~file=arrow.gif~gen~ref.gifNo REPAIR Circuit 117 (PK/BK). TEST the system for normal operation. A3 CHECK THE POWER DOOR LOCK ACTUATOR FOR UNLOCK OPERATION — CIRCUIT 118 (PK/O)/163 (R/O) sxn~us~en~file=box1.gif~gen~ref.gif
sxn~us~en~file=gn0086a.gif~gen~ref.gif sxn~us~en~file=box1.gif~gen~ref.gifMeasure the voltage at the inoperative power door lock actuator connector Pin 2, Circuit 118 (PK/O) or 163 R/O, and ground while operating the door lock switch to the UNLOCK position.
  • Is the voltage greater than 10 volts?
sxn~us~en~file=arrow.gif~gen~ref.gifYes INSTALL a new power door lock actuator. TEST the system for normal operation.
sxn~us~en~file=arrow.gif~gen~ref.gifNo REPAIR Circuit 118 (PK/O) and/or 163 (R/O). TEST the system for normal operation.

Mar 10, 2010 | 1999 Ford Explorer

1 Answer

Air suspension out (inactive ) code



1. The automatic suspension system on a Land Rover must be placed in a service mode (High Lock) prior to raising the vehicle on a frame-contact hoist. This can only be accomplished by using a Land Rover Test Book Scan tool or an aftermarket equivalent.

2. If the suspension is allowed to hang freely at maximum extension, the suspension controller will enter a fault lockout mode and disable the compressor and height sensors

3. In addition, the suspension system will vent the suspension in an attempt to bring the vehicle to a correct ride height.

4. Since the suspension is hanging free at maximum extension, all the air will be vented, causing the vehicle to sit at maximum low when taken off the frame-contact hoist. A Land Rover Test Book Scan Tool or an equivalent is required to reset the suspension once it has entered the lockout mode.

Sep 23, 2009 | 2003 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...