Question about Cars & Trucks

Open Question

Where is the fuel pump relay located on a 1992 toyota cressida gli6

The fuel pump is not working but it is the new one

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
localwonder
  • 6784 Answers

SOURCE: no power at fuel pump chev.S-10 looking for fuel pump relay and fuse

The fuel pump relay is located Under hood, driver side, upper firewall, mounted in relay block.

The fuse is located under the instrument panel to the left of the steering column. The fuse block should be visible from underneath the steering column, near the pedal bracket. If the panel is not visible, check for a removable compartment door or trim panel which may be used on later models to hide the block.



Posted on Jun 03, 2009

Ad
  • 240 Answers

SOURCE: Where is the fuel pump relay located on a 1992 Mercury topaz

the fuel pump relay is located on the left shock tower in the engine compartment in a black box 6x4x1 inches. there are other relays inside the same box which is actually called the ccrm or constant contorl relay module, there should be a double connector with 20 to 26 wires in it, hard to miss.

Posted on Jun 15, 2009

  • 30 Answers

SOURCE: 1994 toyota fuel pump relay

Fuel pump relay is in the engine compartment left side fuse block

Posted on Jul 08, 2009

  • 242 Answers

SOURCE: dont know location of fuel pump relay for 1992 camaro

This is going to sound stupid, but before you change the fuel pump relay, go back to the tank and give it a few good raps(rubber malet works great) if your pump comes on-the buzz, you need a new pump. also if after replacing the relay- if thats what you determine to be the cause and it still won't run- get your ignition module tested-it needs to send a sig to turn on the relay as a safety. oh and sorry can't tell you were the relay is.

Posted on Aug 26, 2009

Testimonial: "Will test tomorrow, thank YOU so much for help! 2 hours on net looking for relay.; location; goodfirst step T.Y..."

  • 185 Answers

SOURCE: trying to locate relay for fuel pump

fuel pump is inside gas tank, relay is under hood on same side as battery

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WE PUT NEW FUEL PUMP ON B2300 MAZDA 1994 YOU PUT GAS IN THE THROTTLE AND IT RUNS BUT WILL NOT START NO OTHER WAY


New pump may be bad--it happens. There should be a check valve that keeps fuel from draining back when you turn it off. If this is not working it could cause this.

Oct 17, 2016 | Mazda B2300 Cars & Trucks

1 Answer

We have replaced fuel pump in a 98 ego metro LSi drove home ran fine. Now it won't start any ideas why it won't start.


Pam, was the fuel filter replaced at the same time that the fuel pump was replaced? If not, replace the fuel filter. Often, the filter will get clogged with debris. When that happens, the fuel pump will be ruined. Replacing the pump without replacing the fuel filter can ruin the new pump. It is also possible that your new fuel pump is defective. Now that most replacement parts are made in China and the third world, there is virtually NO quality control. I'm a professional mechanic and defective brand new parts are a BIG problem in this industry. Was the fuel pump relay replaced when the new fuel pump was installed? Always install a new relay, as a failing [your old] fuel pump will often damage the relay. This will cause problems with the new fuel pump. I would advise that you install a fuel pressure test gauge to the engine. This will allow you verify whether or not the engine is receiving enough fuel pressure. If the pump works but the pressure is low, also check the fuel pressure regulator. The web links below should help you.


How to Check for Fuel Delivery in Geo Metro eHow

FYI, there is also a "sock" style pre-filter on the fuel pump. This also needs to be replaced any time that you replace the fuel pump.

Mar 13, 2015 | Cars & Trucks

1 Answer

Sorry, if this is a silly question, but is a new Fuel Filter installed automatically/come with a new Fuel Pump? Or do you have to buy a new Fuel Filter and attach to the new Fuel Pump before installin


Has the filter ever been changed? Need to know year and model of the truck. Fuel filters can be near the tank or under the hood. Filters are usually separate from the fuel pump.

Nov 12, 2014 | Cars & Trucks

1 Answer

I have a 1996 mercury cougar. The fuel pump is not coming on (intermittently). The radiator fan ( which hadn't worked till the fuel pump problems) comes on and stays on whenever the fuel pump isn't...


your fuel pump is almost out ...go get a new pump and save this headache ,,trust me I learn new things daily as a mechanic with all of the new things they come up with also run 1 can of sea foam to 1 tank of gas ,,your tail pipe will smoke for about 30 minutes ,,it is blowing carbons out of your engine and you will get super gas mileage

Sep 13, 2013 | Cars & Trucks

1 Answer

Fuel pump not getting power f150 1999 4.6L V8


Check the connections for power with a test light. If your getting power to the pump and it doesn't work then it is bad (new or not)

Jul 22, 2017 | 1999 Ford F150 Regular Cab

1 Answer

1999 chevy silverauto quits running no fuel pressure. new fuel pump new filter. Can't figure it out


might be a bad fuel regulator.. or your fuel pump relay might be going bad.. and also where did u get your fuel pump from.. i ran into a problem where i had to replace a fuel pump 3 times before i finally got on that worked right..

Apr 29, 2012 | Chevrolet Cars & Trucks

1 Answer

I have installed a brand new fuel pump on my 2006 Chevy Trailblazer LS. The fuel pump relays are working properly, but the fuel pump, itself, won't work. What would cause a brand new fuel pump not to...


NOW POWER TO IT OR BAD GROUND OR CLUGED FUEL FILTER ORBAD FUEL RELAY SWITCH THE PUMP SHOULDN;T BE BAD IN AN 06 IT COULD BE IT SHOULDN;T BE CHECK FOR POWER TO THE PUMP IT SELF ITS THE FIRST PLACE TO START IF THE PUMP IS PUMPING DISCONNECT THE LINE AT THE FILTER TO SEE IF YOU HAVE FUEL FLOW AND JUST WORK YOUR WAY UP THE SYSTEM THERES KNOW EASY ANSWER IF YOU WANT TO DO IT YOUR SELF JUST BE LOGICAL AND MAKE SURE YOUR TEST ARE GIVEING THE ANSWER THAT YOU NEED DO THE EASYEST TESTS FIRST AND REPLACE PARTS LAST GOOD LUCK

Oct 22, 2010 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

1999 Chevrolet Silverado 1500 Fuel Pump


check the connector to the fuel pump for corrosion or loose pins, the fuel pumps of newer cars and trucks are designed to last at least 100,000 miles, when the new pumps quit did u verify they had power to them?

Mar 09, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...