SOURCE: I need many specs for
If your going to do do that much work , I would invest in a Chilton's or Haynes manual
SOURCE: valve adjustment
tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters
SOURCE: The problem I have is knowing what the clearance
Let me know if this help you.
Testimonial: "This is just exactly what I was looking for. Thanks."
SOURCE: HINO NO4C MOTOR STALLING
sounds like a fuel tank inspection/flush or replacement is on the horizon.... sometimes dirty fuel has contaminated your tank or the tank itself is rusting from the inside out... either way it needs to be addressed... drain the tank analyse what gets drained for particles and water...send the tank to a radiator shop for a complete boil out/inspection....blow out the lines and replace the filter again along with the fuel bowl etc. after that all should be well?
SOURCE: What is the valve tappet
Intake: 0.007-0.009 in. (0.18-0.22mm) Exhaust: 0.009-0.011 in. (0.23-0.27mm)
6,574 views
Usually answered in minutes!
×