Question about 2004 Mitsubishi Endeavor
THEIR ARE ABOUT 9 BOLT TO REMOVE THAT SUPPORT THE INTAKE. 2 ARE IN THE REAR IN THE CENTER OF THE SUPPORT BRACKET THE 5 THAT ANCHOR THE INTAKE ITSELF AND 2 UNDER THE INTAKE THROTTLE BODY. ( 12MM) 3 HOSES ON TOP OF THE INTAKE TO REMOVE AND 1 SENSOR TO UNPLUG OR UNBOLT (8MM)THE ONE ON TOP OF THE INTAKE (TOP LEFT REAR). THIS WILL GIVE YOU ACCESS TO THE REAR PLUGS.
REMOVE THE SENSORS BRACKET OR HOLDER ( ON THE LEFT JUST LIFT UP TO REMOVE) AND SWING THE INTAKE TO THE RIGHT. UNPLUG THE PLUG MODULE THEN UNBOLT THEM (10MM).
Posted on Aug 29, 2009
Loosen the plug with a socket ..and use a magnet to retrieve it
Posted on Jan 25, 2009
SOURCE: 2004 Mitsumishi Endeavor
The front three should be easy enough. They are right in front of the intake plenum. (big black plastic looking thing on top of the engine. The back three are underneath the intake plenum. It seems like a lot to tackle but it is really not that bad.
As always, if you are not sure you have the skills to attempt this go to a qualified mechanic. I did mine in an afternoon.
Posted on Jul 21, 2008
SOURCE: My spark plugs in my
YOU NEED LONG SPARK PLUG SOCKET. NEED A 3/8 INCH RATCHET WRENCH.YOU NEED EXTENSION.YOU NEED SPARK GAUGE YOU NEED A TORQUE WRENCH. NOT MANDATORY JUST DONT OVER TIGHTEN SPARK PLUGS STRIP ALUMINUM THREADS WAIT UNTIL ENGINE COOL TO KEEP FROM WARPING THE HEADS. SPARK PLUGS LOCATION ON TOP OF CYLINDER HEADS.TO GET TO SPARK PLUGS THE COILS ON TOP EACH SPARK PLUG.HAS TO BE REMOVED BY REMOVING SMALL SCREW.THAT HOLD COILS DOWN.AND CHANGE ONE SPARK PLUG AT A TIME SO YOU WONT GET THEM MIXED UP.GAP PLUGS AT 0.028 - 0.031
Posted on Jan 28, 2011
Tips for a great answer:
Mar 03, 2015 | 2005 Mitsubishi Endeavor
Aug 30, 2011 | 2006 Mitsubishi Endeavor
Mar 22, 2011 | 2005 Mitsubishi Endeavor
Jan 28, 2011 | Mitsubishi Endeavor Cars & Trucks
Sep 07, 2010 | 2005 Mitsubishi Endeavor
Jun 28, 2009 | 2004 Mitsubishi Endeavor
Mar 04, 2009 | 2004 Mitsubishi Endeavor
Nov 15, 2016 | 2004 Mitsubishi Endeavor
2,840 people viewed this question
Usually answered in minutes!