Question about 2000 Daewoo Leganza

1 Answer

Time belt i have the picture now i ned to know how to line them up

Posted by on

  • jimboyj Jan 25, 2009

    thank for the help you all ben a help i very glad you all could help me thank you verry much i just dont know how to thank you for all the great help you have given me



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Before removing belt when you rotate crankshaft the MARK will all line up as shown in the picture. Then you loosen tensioner and remove belt there is no need to rotate the pulley to remove and install belt. However if you removed belt without first lining up marks then you need to Line up Crankshaft first by turning cylinder #1 on TDC=top dead center the piston has to be all the way up on COMPRESSION STROKE then line up cam marks. Good luck its pretty simple.

Posted on Jan 25, 2009

  • O Mclean Jan 25, 2009

    You are welcome., Thank you is Good enough It was my PLEASURE



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to line up timing marks on a 3.1 v6

ok now you add a new post
and add 3.1L V6 , clear that.
but spark or cam?
all cars have cam timing and spark timing.
some newer cars the cam sensor is fixed, but not yours. i bet.

why not , pray tell, say what you removed. or fiddled with.

May 29, 2014 | 1993 Pontiac Grand Prix

1 Answer

Wont start, turn over

check if u have spark at any1 of the sparkplugs if not likly coil is bad if u do check fuel lines or just might be gas cao gas filter fuel pump or i have even seen broken valus rocker arms timing belt another word ned to separtate where problem lies

Feb 16, 2013 | 2001 Nissan Xterra

2 Answers

My Nissan Murano has 82,000 miles. Do I ned to


Your owners manual will give you the mileage at which it should be changed.

Apr 06, 2010 | 2003 Nissan Murano

3 Answers

I need to know how to route the serpentine belt to BYPASS the a/c compressor and which belt to use. Thanks

Go to your local auto parts store and purchase a serpentine belt for a 1997 Ford F150 with the same engine as yours and ask for one without A/C. That belt will work and fit perfectly. You cannot use your existing belt and bypass the A/C compressor as the belt will be too long.

Oct 06, 2009 | 1997 Ford F150 Regular Cab

4 Answers

Timing mark locations on EJ22 subaru engine

Complete instructions including pictures for the 22

May 09, 2009 | 1991 Subaru Legacy

1 Answer

1999toyota camry timiming belt

replace the water pump and the drive belts...the timing belt isn't a easy job 

Apr 03, 2009 | 1999 Toyota Camry

2 Answers

Fitting n13 timing belt

A 1990 Nissan Pulsar has a timing chain, not a belt. Here is the picture.

Mar 14, 2009 | 1990 Nissan Pulsar

Not finding what you are looking for?
2000 Daewoo Leganza Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

78267 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides