Question about 2001 Acura MDX

Open Question

How to remove acura mdx door panel

Window off track

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sheiden9
  • 87 Answers

SOURCE: need to remove dvd player in 2005 acura mdx

heres a set of instructions for the dvd player
http://senduit.com/beca9e

Posted on Apr 03, 2009

mcgyver468
  • 710 Answers

SOURCE: my 2001 acura mdx driver side door won't close

THE DOOR CATCH HAS A DOUBLE "C" THAT HOLDS THE DOOR CLOSED. FIRST TAKE A SCREWDRIVER INSIDE THE "C". USING THE HANDLE ON THE INSIDE, PULL THE HANDLE AS IF YOU WERE OPENING THE DOOR AND AT THE SAME TIME, OPEN THE DOUBLE "C" WITH THE SCREWDRIVER. I HOPE THIS HELPS. THANKS FOR USING FIX-YA. PLEASE FEEL FREE TO KEEP ME POSTED. GOOD LUCK

Posted on Sep 02, 2009

Testimonial: "it worked! thank you."

co7196
  • 3433 Answers

SOURCE: 2006 Acura MDX bluetooth stopped

Bluetooths have batteries, Rechargeable. If it won't hold a charge replace the batt.

Posted on Oct 16, 2009

  • 1 Answer

SOURCE: 2004 Acura MDX Water Leak

The 2002 MDX I worked on turned out to be a drainage problem . Seems the factory installed foam in the bottom of the hinge pillar post which blocked the drain holes . Take off the mud flap , remove enough of the splash shield to access the bottom of the hinge pillar and drill a half inch hole at the front lower corner aiming the drill slightly upward ( be sure to protect the bare metal) .Water gushed out when I did this. For extra ins. remove the kick panels and check for two holes a few inchs from the floor, plug and chaulk these holes. Hope this worksfor you too

Posted on Jan 07, 2010

  • 3 Answers

SOURCE: Need to reset the code my Acura MDX navigation

check the side of the glove box. my TL has it on the outside side panel as you look from the driver side. my honda prelude had the code there as well. hope this helps

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MDX Acura 2004 can't open the drivers side door from the outside


Remove the door panel and check the linkage and outer handle.

Jun 19, 2014 | 2004 Acura MDX

1 Answer

How to remove drivers door outside handle on a 2004 Acura MDX


Pop off the cover and remove the screws. 5 minute job.

May 30, 2014 | 2004 Acura MDX

1 Answer

How do i remove front door panel from 2003 acura mdx


Special Tools Required


  • KTC
    trim tool set SOJATP2014*

  • Trim pad remover, Snap-on A 177A or equivalent, commercially
    available
    *Available through the American Honda Tool and Equipment Program; call
    888-424-6857

    NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage
    when prying components.
    1. Remove the
      mirror mount cover.
      Take care not to scratch the door panel.
    1. Remove the inner handle (A). Take care not to scratch the door
      panel.




      -1
      Pry out the cap (B), and remove the screw (C).




      -2
      Pull the inner handle forward and out half-way.




      -3
      Disconnect the inner handle rod (D) from the joint bushing (E), and power
      door lock switch connector (F). For some models: On driver's side, disconnect
      the driving position memory switch connector (G).

      -3
      NOTE: Check the bushing for damage, and replace if necessary.
  • Detach the clips (A) and hooks (B), then remove the speaker grille
    (C). Remove the screws (D).

    1. Detach the clips (A) and release the hooks (B), then remove the
      switch panel (C). Take care not to scratch the door panel. Disconnect the power
      window switch (door multiplex control unit) connectors (D). On driver's side,
      disconnect the power mirror switch connector (E).

    2. Pry out the cap (F), and remove the screw (G).

    1. Release the clips that hold the door panel (A) with a commercially
      available trim pad remover (B), then remove the door panel by pulling it upward.
      Disconnect the speaker connector (C).

      On driver's side, disconnect the front door subharness connector (D). On
      passenger's side, disconnect the courtesy light bulb socket (E), and detach the
      harness clip (F) from the panel.

      Remove the door panel with as little bending as possible to avoid creasing or
      breaking it.

    2. Install the door panel in the reverse order of removal, and note
      these items:
      • Check the clips for damage or stress-whitening, and replace them with new
        one.
      • Make sure the connectors are plugged in properly, and the inner handle rod
        and courtesy light bulb socket are connected properly.
      • Push the clips into place securely.
      • Do the power window control unit reset procedure.
      • Make sure the window and power door locks operate properly.
      • If equipped with driving position memory switch, check for proper operation.
    rjaai003_204.asp?menuid=rdbawh030000&sessionid=b23b61ec-6b2d-41dc-8d50-15026d64c21a&dbkey=s3u5a00j16126721401kdad01rjaai003_204.asp?menuid=rdbawh030000&sessionid=b23b61ec-6b2d-41dc-8d50-15026d64c21a&dbkey=s3v1a00j16126721401kdad03rjaai003_204.asp?menuid=rdbawh030000&sessionid=b23b61ec-6b2d-41dc-8d50-15026d64c21a&dbkey=s3u4a00j16126721401kdad01rjaai003_204.asp?menuid=rdbawh030000&sessionid=b23b61ec-6b2d-41dc-8d50-15026d64c21a&dbkey=s3u6a00j16126721401kdad01

    Sep 18, 2013 | 2003 Acura MDX

    1 Answer

    How to remove door panel from 2003 acura mdx


    bet plastic pray bars, from auto store,
    pry bottom with 1lb force, POP. the rest should be obvious.
    more pry, and removing other parts on panel,
    FSM covers this is spades.

    Sep 15, 2013 | 2003 Acura MDX

    1 Answer

    2007 MDX rear hatch panelling


    go on line look up you tube look for videos how to remove hatch panel 2007 MDX.or try online repair manuals.

    Apr 22, 2013 | 2004 Acura MDX

    1 Answer

    How to install the right mirror for accura MDX 2008


    You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then remove the bolts securing the mirror to the door

    Sep 17, 2009 | 2008 Acura Mdx

    1 Answer

    I was rolling up one of my rear power windows and it made a terrible noise and then fell back down. It now will not roll up and it slides freely when I pull up on the glass.


    You will have to remove the screws of the door panel, than take flat-tip screwdriver and pry off door panel. Than you will have to put window back on the track.

    Jun 22, 2009 | 2006 Acura MDX

    1 Answer

    Passenger window out of track? how do I get it back into track or is it pins?


    There's most likely two spots on either track that has screws you tighten down to hold the window in place, and on track. You'll have to take the door panel off to see more of the window.

    Through the holes in the frame of the door, roll the window down/up, or pull it up/push it down, and try to find the track tighteners.

    Apr 23, 2009 | 2004 Acura MDX

    3 Answers

    Acura MDX Navigation system is intermittent. Need to remove it to send to Alpine for repair. Can't find instructions.


    its really easey to remove the dvd unit under the pasenger seat. just put the seat all the way forward and pull the plastic guard from the seat track (pull straight back) then unplug the harness connectors in the back of the unit.
    Then put the seat all the way back and remove the 1o mm nuts on the side brackets of the unit and pull it forward.

    Jan 20, 2009 | 2005 Acura MDX

    Not finding what you are looking for?
    2001 Acura MDX Logo

    Related Topics:

    217 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Acura Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7710 Answers

    Are you an Acura Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...