Question about 1992 Mitsubishi Diamante

1 Answer

380 ES Mitsubishi 2006 model door window control

I got a 380 ES Mitsubishi 2006 model. The driver's door window cannot be open while all other three windows functionally operates with their control switches. I tried several times to operate the switch door window at driver side but still no response.

Could you share to me what really the problem is?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

It possably isnt the switch it maybe the motor itself if you open the door panel and disconect the moter run 2 wires to the main battery becarefull because when you do this the motor may or may not work if the window goes up or down when you do this then your moter is good if not replace motor otherwise switch your wires from one switch to anouther that you know is good and try to see if it works then your switch may be bad.. do to the drivers window being used the most the switch or motor will go bad sooner then the others

Posted on Jan 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the wiring schematics for driver door panel and all switches in a 2003 Chevy Tahoe. My window won't go down on that side and I'm sure I have a short somewhere because my switch works with all other...


You don't know what your getting into , The door switches have electronic control modules incorporated ,DDM- Driver door module an PDM passenger door module .
The power window system consists of the following components:
?€¢
Driver Door Module (DDM)


?€¢
Passenger Door Module (PDM)


?€¢
Body Control Module (BCM)


?€¢
RR power window switch


?€¢
Window up and window down relays in each of the rear passenger window switches


?€¢
Window lockout switch


?€¢
Reversible power window motors in each of the doors (circuit breaker protected)


?€¢
LT DOOR CB 25A (System power for left windows)


?€¢
RT DOOR CB 25A (System power for right windows)


The DDM contains four power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the two front windows have three positions UP, Down and Express Down, while the switches for the rear windows have only two positions, UP and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a Class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has two positions Up and Down. Each of these switch positions is a direct input to the PDM.
The two rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a Class 2 message from the DDM, can control the set of relays which will activate the rear window motors.
You need a scan tool to diagnose these systems
Power Window Inoperative - Driver Door

1

Did you perform the Door Systems Diagnostic System Check?
Go to Step 2
Go to Diagnostic System Check - Door Systems

2

Operate the driver power window in the UP and DOWN directions.
Does the driver power window operate properly?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3

3

  1. Install a scan tool.
  2. Monitor the driver window status data parameter in the driver door inputs list.
Does the driver window status data parameter display an active state?
Go to Step 11
Go to Step 4

4

  1. Monitor the driver window status data parameter in the driver door module inputs list.
  2. Activate the driver power window switch in the up and down positions.
Does the driver window status data parameter change accordingly?
Go to Step 5
The data link connector (DLC) allows a scan tool to communicate with the class 2 serial data line. The serial data line is the means by which the microprocessor-controlled modules in the vehicle communicate with each other. Once the scan tool is connected to the class 2 serial data line through the DLC, the scan tool can be used to monitor each module for diagnostic purposes and to check for diagnostic trouble codes (DTCs). Class 2 serial data is transmitted on a single wire at an average of 10.4 kbps.

You

Mar 24, 2015 | Cars & Trucks

1 Answer

Why wont windows and lock work? could it be the front ecu?


Check inside of door where wiring comes thru for broken wires ,ECU doesn't control windows or door locks. You didn't state what model vehicle you own. But opening and closing door on drivers side causes broken wires on numerous vehicles over the years, most makes and models. Split boot and check all wires inside for breakage.

May 29, 2014 | Mitsubishi Galant Cars & Trucks

1 Answer

I have a 2006 mitsubishi endevor. my power windows and locks are not working. alos no power to my hatch just wondering if have any ideas on whats wrong so i can fix it.


You should check the fuse for the windows and hatch, if that is not what the problem is then i suggest replacing the main drivers door control panel.

Aug 10, 2013 | Mitsubishi Endeavor Cars & Trucks

1 Answer

Mitsubishi galant es 1999 power window off track


Did you already removed the door panel? If yes check the track, it could be loose

Mar 30, 2013 | 1999 Mitsubishi Galant ES V6

1 Answer

Fuse box location mitsubishi 380 2005


hi

the first internal fuse box on a Australian 380 Mitsubishi is located on the drivers right side end of the dash.


open the drivers side door and on the right end of the dash, you will see a panel that sits flush on the end of the dash.


pry the panel open with your fingers or a tool, it opens up to the right, there are relays and fuses in there for the cars different functions.


the 2nd fuse box is located under the hood/bonnet on the Australian 380 model.


if you are in front of the car looking at the windscreen it is located on the right side in a black box near the suspension tower.


the top pops off and relays and fuses are in there.


both fuses boxes have the wiring diagrams under the lids so you can identify which fuse operates which function


to match the fuses to the diagram, start from one end first and check the amps for that fuse then the next one in the same row and then the next one.


after that you should be able match the fuses to the diagram, if the fuses dont match the diagram from that end, then start at the other end and do the same thing.


i hope this helps


cheers

Jul 23, 2012 | Mitsubishi Cars & Trucks

1 Answer

2006 RX330, After having battery problems, I can't open all the windows from the driver's door. All the windows work from their respective door. Any suggertions? Thanks Tom


Each window has a pressure sensor that must be reset each time the battery is disconnected. My wife has an '04 RX330. According to the owner's manual for '04, to reset the pressure sensor for a window, bring the window down half-way, using the control on the same door as the window and then raise it back up, holding the up position on the control for 1 second after the window is all the way up.

On the '04, this brings window control back to driver's side module.

Feb 01, 2011 | 2006 Lexus Es 330

1 Answer

Describe how to replace a air filter in lancer 2006 es


hello there:
you will find the air cleaner box on the front drivers side under the hood...it will be near the finder it could be round or square some you will need to remove the screws out of the sides of the filter box and some you will just have three to four clips you will have to snap the clamp off and then lift out hope this will helps you out sincerely D.Jones

Jun 06, 2010 | 2006 Mitsubishi Lancer

Not finding what you are looking for?
1992 Mitsubishi Diamante Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...