Question about 2002 Mitsubishi Eclipse Spyder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: windows will no go down
check the fuses under hood and under steering wheel inside the car,if that dont help you will have to change the switch on the drivers door panel,double check if its connected tight.please leave comment,vote,note.thankyou
Posted on Sep 13, 2009
Most heater control valves are on or near the firewall behind the engine. Look for coolant hoses attached to a small metal piece. It also will have an arm that has a cable from inside the vehicle attached to it.
Posted on Oct 19, 2009
Maintenance schedules are usually not on a yearly schedule. They are based on miles or months (whichever comes first) and what services are required depend on how much you drive your car. If you down load a factory service manual it will tell you at what mile/month intervals to do maintenance.
Posted on Dec 09, 2010
It is located in the engine compartment fuse box, its the relay on the right hand side closet to the headlight 1st row
Posted on Apr 21, 2012
Tips for a great answer:
Jun 25, 2015 | 2002 Mitsubishi Lancer
Apr 25, 2015 | 2002 Mitsubishi Mirage
Oct 05, 2012 | Audi A4 Cars & Trucks
Apr 21, 2012 | 2002 Mitsubishi Eclipse
Jul 28, 2011 | 2002 Mitsubishi Montero
MPI CONTROL RELAY AND FUEL PUMP
RELAY CONTINUITY CHECK
UNDO THE RELAY CONNECTOR
1) Without Battery Voltage: check continuity between connector terminals 2 & 4
2) With Battery Voltage: connect 12v battery power to connector terminals 2 (-) & 4 (+) . Then, check continuity between connector terminals 1 & 3. Refer to diagram below:
If the relay connector does not measure the correct continuity, then replace the relay.
"If this solution has helped you resolve your problem, please be kind enough to leave a testimonial"
Jun 04, 2011 | 1995 Mitsubishi Diamante
Dec 09, 2010 | 2004 Mitsubishi Eclipse
Jul 21, 2010 | 2002 Mitsubishi Diamante
Jan 31, 2009 | 2000 Mitsubishi Eclipse
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: