Question about 2000 Ford Expedition
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
That's because they are hidden quite well. If you look at the engine, you'll see yellow plastic prongs (?) that look like spark plugs, but hook up to the silver tubing. That's the fuel injectors. BUT, right behind the yellow plugs, are black ones. The black one is the connector to the spark plug. The plug itself sits about 4 inches down into the block of the engine. They are a real pain, and from what I can tell, you only have decent access to the first 2-4 of them, then they get too far back and start going under the dash (you'll see what I mean when you get there).
Posted on Aug 06, 2008
Found this answer in anotherr forum and works for me.
Power Door Lock Relay Location
Posted on Oct 10, 2009
Look under your steering wheel right under the dash. There should be a small white strip with 5 numbers. This is your master code for your vehicle. If you bought the car used and they give you a code, they could have made their own code, but the master will override it. If this don't help, the module for the doors may be going bad.
Posted on Jan 05, 2010
Check the #15 fuse in fusebox behind marked panel on left lower dash just below and left of steering column. This is only a 5 amp fuse but it controls a lot. This fixed our 2001 Expedition. 25 cents.
Posted on Apr 04, 2010
Tips for a great answer:
Mar 14, 2018 | Lincoln Cars & Trucks
Dec 02, 2015 | Ford Cars & Trucks
Mar 22, 2014 | 1998 Ford Expedition
Mar 21, 2013 | Ford Expedition Cars & Trucks
Oct 01, 2012 | 2001 Ford Expedition
Apr 17, 2012 | 2001 Ford Expedition
Jan 10, 2011 | 1998 Ford Expedition
Dec 10, 2010 | 2004 Ford Expedition
Sep 02, 2010 | 1999 Ford Expedition
273 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: