Question about 2001 Mitsubishi Mirage

1 Answer

Need radio code and how 2 input it - 2001 Mitsubishi Mirage

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

David check the glove box side sometimes the code is there/ you should be able to go to any dealership on drive and they can show you for free. Remember they want your business. And right know is the best time.

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Safe mode car radio


To unlock your VW factory radio from "SAFE" mode, you will need to enter the radio code. Typically, the code is written on a radio card included with the documentation for the vehicle when the car is first sold.

If you don't have the code, or have lost it, you can retrieve it by visiting your VW dealer. You will need the car's VIN number and the serial number of the radio (located on the body of the radio).

The procedure to enter the code is as follows:

Press the "MODE" and "SCAN" buttons simultaneously and hold them until "1000" appears on the radio display. Release the buttons as soon as this number appears.

Refer to your Radio Card and use the station preset buttons ("1", "2", "3" and "4") to input the code. Press the "1" button repeatedly to input the first digit, the "2" button to input the second digit, etc.

Press and hold the "MODE" and "SCAN" buttons simultaneously until "SAFE" appears again. Release, and the radio should be unlocked.

Do not enter the wrong code more than three times, or the radio will lock itself. Note the dealer can also enter the code for you (they may charge a small fee).

Oct 17, 2013 | Volkswagen Cars & Trucks

1 Answer

"Safe" keeps displaying on radio, locked out


You need to remove the radio back up fuse for at least 2 minutes (yeah, I know they say 30 seconds, but it hasn't always worked for me), then reinstall the fuse. It should show 1000 or something similar on the digital display. You need to have the 4 digit code to unlock the radio and depress a couple of buttons after entering the code.

Remember that you push the radio pre-set station buttons to enter the code; button 1 for the first digit, button 2 for the second digit and so on. You will then need to push another button on your radio to enter the code. The button that you need to push will depend on which type radio you have.

If you don't have the radio code, look on the trunk floor to see if the radio serial number or code for the radio is there. If the PDI was done correctly and the radio wasn't replaced, then there should be a sticker on the trunk floor area with the serial number of the radio and/or the code. If it isn't there, then the radio needs to be removed from the vehicle to see the code that is stamped into the metal body of the radio. This plus the VIN number are input into the VW information system (done at the dealership only) to obtain the radio code.

The instructions for inputing the code should be in the owners manual or radio suppliment as supplied by VW, when the vehicle was sold new. If you have the code but aren't sure about how to input the code, see the local dealership, they can do it on the driveway in a manner of a few moments.

If the radio requires to be pulled to obtain the code, expect to pay between .5 to 1.0 of labour at the dealership's posted labour rate to obtain the code and input it into the radio to make it function. They used to do it for free until they ended up doing something 10 or more of these a day, because everyone else was charging up to $120! to unlock and programme the radio!

Mar 04, 2013 | Cars & Trucks

1 Answer

Pulled radio to get serial # and now I can't get the radio to go into code input mode. it just says "safe" and the icon for pause is on


If you've entered a bad code a couple times, you need to wait an hour while the radio and ignition are on. Then, turn on the radio, SAFE should be displayed. Then Press the FM1 button and hold it down, then while holding down the FM1 button, press and hold the AM buttons so that both buttons are held down simultaneously. Release the buttons. Now enter the correct code using the radio pre-set station buttons (one through 4). Button 1 changes the first digit in the code "1"000, Button "two" changes the second digit in the code 1"0" "three" 00, button changes the third digit, button 4 changes the last digit in the code. In most cases the first digit is a 1 and won't need to be changed. You push each pre-set station button multiple times to step through the digits (1-9) to get the correct code displayed.
Code 1246 would entered by pushing button "2" two times, pushing button 3 four times, and pushing button 4, six times.

After entering the correct security code, push and hold down the FM1 and AM button simultaneously as before until SAFE is displayed, then release the 2 buttons, and now the radio should now work.

Jan 21, 2013 | 1993 Audi 100

2 Answers

I need a code to unlock my car radio for a 2000 Mitsubishi Galant, please...\r\nI have the information needed to do so... Serial number : 99224138A MR472958 Thank you so much!


Your code should be 2101.

Use the preset buttons to input the code. Preset 1 scrolls through digit 1, preset 2 for digit 2, etc.

Once the code is set, push the unlock button; depending on model the unlock button will be either CD, TAPE, or AM/FM.

Sep 22, 2009 | Mitsubishi Cars & Trucks

1 Answer

Acura tl 2008 CODE ERRORE


radio is locked out from installing incorrect code to many times need to disconnect battery for couple minutes then reconnect and install correct code

May 02, 2009 | 2001 Acura MDX

1 Answer

The rev counter indicates 500 revs on tick over


If you have the correct 4 digit code, you should be able to input it right in. After 3 unsuccessful attempts i will lock out. Push the BND button and hold until radio says code in.

2 ways to get the correct code
1. Giving your VIN# to the land rover dealer in exchange for the radio.
2. If that code doesn't work, you will need to have the radio pulled and provide them with the serial # to the radio and provide that to the dealer.

Mar 27, 2009 | 1998 Land Rover Range Rover

2 Answers

Car radio problem


I would try removing either the two fuses for the radio or disconnecting the ground on the battery for a while. When you start the car it should rest from "OFF" to "CDE" and you will be able to enter code again

Feb 23, 2009 | 2001 Volvo S40

3 Answers

Need to input my radio code on 2005 Honda Civic


ok your radio displays ERR , OK 3 options let it sit for an hour turned on , to reture to CODE display , or pull the radio fuse out for a minute and put it back in , returning to the CODE display , or disconnect the battery for a minute , returning to the CODE display . you got the ERR display because the code was wrong or not entered correctly , make your choice of getting the radio back to the CODE display by 1 of those 3 choices , while the radio displays CODE , use the preset buttons , if the first number of your code is 4 , then press the #1 preset button 4 time , when the first number has been input , put the 2nd number in by pressing the #2 prest button , if 2nd number of code is 8 , press the # 2 preset button 8 times till the # 8 is displayed , and so on . you see where this is giong ? when you have entered all the numbers correctly you will have you radio back . when you say you have the radio code , good luck ! were rooting for ya .

J5

Jan 19, 2009 | 2005 Honda Civic

1 Answer

Re setting the radio on my VW Golf


heres what u do , switch radio on , safe appears in radio display , followed by 1000 approximately 3 seconds later , input the security code found on the radio card using the station preset buttons on the radio , Button 1 corresponds to the first number in the security code , 2 is the second and so on . press the applicable button repeatedly until the desired number appears in the display , ( press button 1 three times if the first number is 3 ), when the entire code has been input and appears on the display , press the right side of the seek button for longer than 2 seconds until an audible signal is heard , ,,, if you do not get this procedure correct , in 2 attempts , the radio will lock up for 1 hour before you can try again .. if this happens , leave the radio on for minimum 1 hour without touching it , after that time you may try again ..

J5

Jan 15, 2009 | 2001 Volkswagen Golf

Not finding what you are looking for?
2001 Mitsubishi Mirage Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...