Question about Cars & Trucks

Open Question

Nissan marano vdf button - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Vdf off light and the slip light come up and remains


Have the computer scanned for fault codes as a first step.

Mar 08, 2015 | Nissan Pathfinder Cars & Trucks

1 Answer

2004 nissan marano will turn left but not right


Great for NASCAR nut not much else. The question is what happens when you try? Noise? No action at all? Stops turning?

Dec 27, 2014 | Nissan Cars & Trucks

1 Answer

How to change stop light on 2003 nissan marano


The cover lense pops off. Use a screw driver and gently pry it off

Mar 07, 2010 | 2003 Nissan Murano

1 Answer

Abs slip and vdf light on


You can take you're car to any auto zone store and they can put a code reader on it for free it will not cost you a dime and they can tell you why the light is coming on and what is wronge with it

Mar 06, 2010 | 2004 Infiniti G35 Sport Coupe

2 Answers

When should the timing belt on a 2005 nissan marano be replaced ?


Hello tbyers006: My name is Roger and I will help you. According to what the shop manuals show. Your vehicle has a 3.5 V-6 engine. This motor does not have a timing belt. This engine uses a timing chain. Timing chains have no scheduled replacement. Should you have further questions please just ask. Please rate the answer you received. This way I know the answer was helpful. Thank You for using Fix Ya. Roger

Oct 30, 2009 | 2003 Nissan Murano

1 Answer

2004 MARANO WILL NOT START WITHOUT A SPARKPLUG OUT OF THE CYLINDER.YES MUST HAVE THE PLUG ANY PLUG ONE PLUG OUT IT WILL START.


This is caused through a few things
1,Spark not strong enough when trying on all cylinders A get ign coils check out ,as it needs a build up in the coils to boost the next one to fire when hit by charge of 12 volts not 11.5 volts as a plug out also gives a quicker spin.
2'.Loss of compression on all cylinders which would be when you get the compression checked out should be about 160 psi and yours might be 100 psi which will also cause the problem.
3 .Check injectors as they might not have enough squirt untill slightly warm.
But would start with the power to coils first as the power to coils must be constent 12v So check it out and let me know. Ron

Oct 24, 2009 | Nissan Murano Cars & Trucks

1 Answer

2004 nissan maxima SE with 61,000 miles. Driving


no it is not it could be the trans a vavle or a cracked head

Mar 15, 2009 | 2004 Nissan Maxima

1 Answer

How to change oxygen sensor on 2006 marano


it is very easy to change. just look for o2 sensor from the header back. you will need a o2 sensor socket.you can cheat and use a 7/8 open end wrench.my best advice is to set the car up. by warming up the car.just warm it up dont get it cranking hot!!!take the old one out while its warm.and put the new one in when its cold again.about 20 minutes.trust me on this.if you put the new one in while its warm the threads sometimes mess up.

Mar 10, 2009 | 2003 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...