Question about Saturn SL2
I have purchased the module but no one can tell me where it supposed to go.
The Saturn Fuel pump relay and fuse is located undar the panes on the passenger side of the center console near the passengers left foot there are two relays there that look identical one is fuel pump relay. Just switch them around they are bot the same and see if the fuel pump runs now also the fuel pump fuse is in there i can't send diaagrams on fixya because their program will not let them go through if you need one email me at email@example.com Please give me a fixya rating if this information is helpful to you
Posted on Aug 31, 2008
yes it is the ignition coils . po304 is a miss fire on #4 cylinder.wires and plugs should fix the problem unless ignition coil is not firing. there are 2 coils they run 1&4 2 &3 cylinders.
Posted on Mar 12, 2009
Hello radenke: My name is Roger and I will help. You can find the filter located under the vehicle mounted or the drivers side of the engine compartment fuel rail. Should you need further help please just ask. Please rate the answer you received. This way I know the information was helpful. Thank You for using Fix Ya. Roger
Posted on Oct 30, 2009
Your valve body and possibly input shaft nut need to be replaced. The valve body's booster valve is worn down and won't create pressure. Before it went completely out it slammed on the input shaft nut and loosened it.
You need to replace the valve body and retorque the input shaft nut. The transmission is not junk. The above needs to be replaced and change the filter and fluid and do it every 20K miles.
Posted on Feb 22, 2010
Tips for a great answer:
Nov 20, 2013 | 1992 Saturn SL2
Aug 26, 2011 | Saturn SL1 Cars & Trucks
Aug 20, 2011 | 1999 Chrysler LHS
Mar 19, 2011 | Saturn SL2 Cars & Trucks
Oct 12, 2010 | 1999 Saturn SL
May 02, 2010 | 1993 Saturn SL2
Apr 11, 2010 | 1999 Saturn SL
Dec 08, 2009 | 1999 Saturn SL
Nov 08, 2009 | 2002 Saturn Sl
May 12, 2009 | 1999 Saturn SL
343 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: