Question about 1991 Toyota Camry

1 Answer

91 toyota camry door ajar light stays on along with the chime

The fuse that controls the seatbelt power windows and gauges keeps blowing its a 7.5 a fuse.  The door open light and the chime stays on constantly while i drive when i replace the fuse the chime stops. When im driving but the fuse soon blows out and the chime continues. but the door open light stays on all the time. I have a feeling that these problems are all interconnected do you have any recomendations.

Posted by on

  • Anonymous Mar 15, 2014

    when key is the switch and drive rside door is open there is no chime

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,674 Answers

Probably a faulty door switch. Are you familiar with what I'm talking about. Little push like switches that the doors push on as they close, usually on door post by latch end, or sometimes in jamb of door at hinge end.

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door chimr module loca5ion 2005 taurus


There isn't a chime module , built into instrument cluster !
Door Ajar Chime
The door ajar chime feature is controlled by the smart junction box (SJB). The driver and passenger door ajar switches, and the lift gate are hardwired to the SJB. If any door or lift gate is sensed as being open, and the ignition switch is in RUN/START position, the SJB will process the input and sends a chime request to the instrument cluster over the controller area network (CAN).
Safety Belt Warning Chime
The safety belt chime feature is controlled by the restraints control module (RCM). The driver safety belt switch is hardwired to the RCM. The RCM communicates with the instrument cluster over a hardwire connection. If at any time during the first 6 seconds after the ignition switch is placed in RUN the driver safety belt is sensed as being unfastened, the RCM will process the input, and in turn, sends a chime request to the instrument cluster.
Do you know what C.A.N controller area network is ? Serial data communication bus.
Do How to Diagnose Controller Area Network CAN

May 28, 2016 | 2005 Ford Taurus

1 Answer

2004 fx4 f 150 just got through disabling door ajar and seatbelt chime now odometer don't work and the radio stays on with the key out of the ignition


somehow I was the annoynmess person with the question about the door ajar and a seatbelt alarm that we disabled, and odometer quitting the radio stayed on well it was just a plug and the odometer speedometer all that works now, but the radio still stay on with a key out of ignition, and now the AC don't cool

May 31, 2014 | 2004 Ford F150

2 Answers

2004 fx4 f 150 just got through disabling door ajar and seatbelt chime now odometer don't work and the radio stays on with the key out of the ignition


There is another legitimate and easy way to disable seat belt chime. Radio is supposed to stay on til door opens. That is correct

May 31, 2014 | 2004 Ford F150

1 Answer

Camry door chime stays on, door ajar light goes off as normal


Could be the sensor in the key switch telling you the key is still in the lock.

Jul 23, 2012 | 1991 Toyota Camry

1 Answer

I have a 1997 toyota corolla that one of the chimes (seat belt, key ignition or lights) just started dinging and won't stop until the car is turned off.


Get in the car, make sure your dome light is set to door-operation.
Close all the doors, does the dome light go out?
If so, it's not the door ajar chime. If not, one of your door pin switches is defective.
Buckle your seatbelt, does the seatbelt warning light on the dash go out?
If so, it's not the seatbelt alarm. If not, it's the seatbelt buckle receiver.
The light warning works with the key off, so it is not that since turning the car off would not stop it.
Last thing it could be is the ignition key alarm.
I have seen a few malfunction over the years.

Sep 13, 2009 | 2001 Toyota Corolla

1 Answer

Gauge fuse keep blowing up


7.5A fuse keeps blowing because there is an electrical connection fault. Take the car for diagnosis.

Mar 19, 2009 | 1991 Toyota Camry

2 Answers

91 Camry fuse problem


If there is anything, that is in any way "burnt", it needs to be replaced.
I would try a local auto recycler before I ordered a new light failure sensor.

Nov 10, 2008 | 1991 Toyota Camry

1 Answer

1991 Toyota Camry


try a higher amp fuse

Nov 10, 2008 | 1991 Toyota Camry

1 Answer

98 f150 power windows/4x4/dome light/window wipers problem


2 possible problems one might be the ignition switch is not powering up those components,the other might be the gem module its like a body control module and it runs those components

Aug 31, 2008 | 1998 Ford F150 Regular Cab

2 Answers

Fuse keeps blowing on 1997 camry


there could be chaffed wires that r grounding

Aug 15, 2008 | 1997 Toyota Camry

Not finding what you are looking for?
1991 Toyota Camry Logo

672 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...