Question about 2004 Lexus RX 330

Open Question

2005 RX330 Tail Light burn out replace circuit board?

Was informed by dealer service dept that in order to fix 2005 tail light burn out, they have to replace the circuit board at the tune of about $170. Can this be correct?

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 548 Answers

SOURCE: RX 330 - Replace tail light on 2004 Lexus RX330

on the backside of the light there should be a plastic access panel that you can gently pull off with a small flat-bladed screwdriver and then get to the light bulbs. if not, look for a small recess on the side of the lens cover itself.

Posted on Jan 23, 2009

Ad
michigan man
  • 3533 Answers

SOURCE: burned out tail light

open up the rear hatch and remove the panel in the corner you are replacing the blub and then you see small screws or nuts that you have to remove and it maybe the kind you just twist the blub out of the socket.

Posted on Feb 21, 2009

morse008
  • 1111 Answers

SOURCE: how to replace the right rear tail lightbulb rx330

can you not see the bulb itself i believe they come out through the back

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2011 Mercury Milan tail light on passenger side is out. The circuit board flickers when I push the brakes.


Make sure all bulbs are ok on the side that is flickering.You may have a ground issue and that can be related to a bulb

May 23, 2015 | 2011 Mercury Milan

1 Answer

Passenger tail light out the top one replaced tail light socket still not working bulb is 3157


These have a circuit board in the tail lights.They are prone to failure due to moisture The replacement boards are available after market from any parts store that sells dorman products

Jan 18, 2014 | 2003 Dodge Durango

1 Answer

Tail light assembly keeps going bad on my 1999 GMC Sierra


You need to help by providing more information about what actually fails in the tail light assembly.

Aug 20, 2017 | Cars & Trucks

1 Answer

2005 chevy silverado abs problem light stays on


Check the fuses.I know that there was a recall for the ABS senser,but not sure what years are covered.Check with the dealer service Dept.The just clean the sensor and there is no charge.Not sure if this could cause your issue.I had this done on a 02 and a 04.They also replaced the tail gate cables for free.

Jan 21, 2010 | 2005 Chevrolet Silverado

1 Answer

How to replace the right rear tail lightbulb rx330


can you not see the bulb itself i believe they come out through the back

Sep 07, 2009 | 2004 Lexus RX 330

1 Answer

Tail light circuit burned out from trailer harness


IM LOOKING FOR SERVICE MANUAL TOO. HOPEFULLY DOWNLOADABLE ONE.
ANY HELP (KASANDEN@JUNO.COM)

Jul 08, 2009 | 2005 Jeep Liberty

1 Answer

Tail/Brake Light constantly burning out


sound like a wire is broken and touching the frame of the car

May 20, 2009 | 2005 Kia Optima

1 Answer

BRAKE LIGHTS..... A SHORT MAYBE?


FYI - there was a recall on the GMC Envoy tail light circuit boards back in 2004-05. I would suggest taking it to an authorized dealer and ask them about it. A lot of times these types of things are taken care of at no charge if it is/was a factory recall. It's a safety issue - they should take care of it.

May 19, 2009 | 2002 GMC Envoy

1 Answer

Brake lights on tail don't work, upper one does.


There is a recall on the tail lights from GM. The problem I found on mine were faulty contacts that would burn out the bulb contacts in short order after replacing the bulbs. So even if you replace the bulbs they will only work for a short while before they burn out. Take it to a GM dealer to get the complete tail light assemblies replaced.

May 11, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

Brake lights quit working


Tail lights acting insane?

We had the same issue with our 2000 Pontiac Montana. Brake lights, turn signal lights, running lights, back-up lights and emergency flasher didn’t work at all or operated at random. The cause: poorly designed aluminum contacts on the tail light circuit board and wiring harness connector arced over and disintegrated with normal use.

Pull the tail lamp assembly, remove the electrical connector and look for burned contacts on the connector plug and the connector socket (they call this long plastic piece with the socket the circuit board: it includes the four bulb sockets. Replace the circuit board and the wiring connector.

You can DIY this job with basic auto mechanical/electrical skills and tools. The two circuit boards and the two connectors set me back $230 (2009 cost) for new parts. The electrical contacts on the factory replacement parts are improved.

I needed a T-30 torx driver to remove the tail light assembly (you need this to change out bulbs, too), wire cutters, wire strippers, electrical tape and an electrical lug crimper to do the job.

Aug 02, 2008 | 2003 Pontiac Montana

Not finding what you are looking for?
2004 Lexus RX 330 Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

907 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...