Question about 2003 Ford Taurus

Open Question

2003 ford windstar, Battery Saver Relay - 2003 Ford Taurus

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I need to know what

The fuse number for the fuel pump motor is #5 located under the hood. And it takes a 15A fuse.

Posted on Apr 05, 2009

Ad
joe7379
  • 93 Answers

SOURCE: car wont stay running

have you checked the auto shutdown relay and fuel pump?

joe

Posted on May 19, 2009

  • 10 Answers

SOURCE: battery saver relay is on and do not start

One it could be the battery but if your radio and stuff works then it is not the case, the clicking is your starter trying to turn over, so that could be it as well.

Posted on Jun 03, 2009

  • 1 Answer

SOURCE: battery saver relay is on and wont start taurus 1999

where is the battery relay saver on ford ranger 98 4x4

Posted on May 01, 2010

  • 198 Answers

SOURCE: replacing battery 2003 ford windstar

Remove all guards in the way, unbolt the baterry hold down clamp, remove,then unbolt each battery terminal. replace battery with a fully charged battery of the same type. Clean the terminals good before installing back on the battery. Use thw terminal washers, usually green and red in color, red for the positive post and so on. Rough the posts, smear some battery grease on each post install washers, then battery posts themselves. Tighten both posts just to the point that they will not turn, don't overtighten them they may break, then you'll need new post ends.

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump relay switch located at on a 2003 Ford Windstar


The fuel pump relay is located in the battery junction box.

Jan 22, 2017 | 2003 Ford Windstar

1 Answer

What is the power window fuse/relay combination 2003 ford windstar


Power windows operate through the combination of 30A FUSE 106 in the battery junction box and the accessory delay relay in the central junction box.

Dec 14, 2016 | 2003 Ford Windstar

1 Answer

I have a 2003 ford windstar the hazzard lights keep blinking and it is wearing my battery out.


Read about the problem at the link, it is not a cut and dry issue and it is not controlled by a relay, it is all done through computer mofdules. http://www.automotiveforums.com/t1057904-discuss03_windstar_hazzards_will_not_stop_flashing.html

Oct 14, 2016 | Ford Cars & Trucks

1 Answer

Fuelfuel pump relay location on ford windstar 2003 3.0ltll


Check this fixya question for diagrams:
http://www.fixya.com/cars/t9154097-need_2002_ford_windstar_central_junction

I'm pretty sure 2001-2003 use the same fuse box.
2003 Windstars only came with 3.8L engines
I believe you are looking for fuse #5 and relay #207

818502b2-6b93-4a5d-9515-f67511512e38.gif


25499285-xllmnomyhfij3vuohopglern-2-2.gif


25499285-xllmnomyhfij3vuohopglern-2-3.gif


25499285-xllmnomyhfij3vuohopglern-2-4.gif

Mar 01, 2015 | 2003 Ford Windstar

2 Answers

Where is the interior light relay on 2001 ford windstar


Your interior lights are controlled by the GEM - generic electronic module !
Battery Saver The battery saver relay is controlled by the generic electronic module (GEM) and is located in the fuse junction panel. The battery saver relay is designed to supply B+ voltage to the following:
  • dome and map lamp switches
  • visor lamps
  • glove box lamp switch
  • interior lamp switch
  • interior courtesy lamp relay
  • delayed accessory relay
The function of the battery saver relay is to prevent excessive battery drain by interior lighting circuits. The GEM supplies a ground signal to the battery saver relay anytime one of the wake-up inputs of the GEM is activated to operate the battery saver relay. A wake-up command is sent when:
  • any door becomes ajar or is opened or closed.
  • the ignition key is inserted or removed.
  • the ignition switch is turned from OFF to RUN.
  • the ignition switch is turned from OFF to ACC.
  • a wake-up request is received from the remote anti-theft personality (RAP) module (if equipped).
  • The GEM will maintain the ground input with ignition in RUN or for 40 minutes from the last input activation with ignition in the OFF position. After 40 minutes the ground signal is discontinued.
This de-engergizes the battery saver relay preventing B+ voltage supply to the controlled switches and circuits.
  • Courtesy Lamp On Continuously
  • Short to power.
  • Damaged switch.
  • Generic electronic module.
  • GO to Pinpoint Test AF .
PINPOINT TEST AF: COURTESY LAMPS ON CONTINUOUSLY AF1 PRELIMINARY CHECKS
  • Check connections for clean tight fit.
  • Check for loose or damaged wires.
Do components and wiring check OK? Yes No GO to AF2 . SERVICE or REPLACE as required. GO to AF2 . AF2 CHECK CIRCUIT 53 (BK/LB)
  • Remove interior lamp relay.
  • Measure voltage at interior lamp relay connector Pin 87, Circuit 53 (BK/LB).
Is voltage greater than 0 volts? Yes No SERVICE Circuit 53 (BK/LB) for short to B+. RESTORE vehicle. RETEST system. GO to AF3 . AF3 CHECK CIRCUIT 434 (LB/BK)
  • Measure resistance between interior lamp relay connector Pin 85, Circuit 434 (LB/BK) and ground.
Is resistance 5 ohms or less? Yes No SERVICE Circuit 434 (LB/BK) for short to ground. RESTORE vehicle. RETEST system. REPLACE interior lamp relay. RESTORE vehicle. RETEST system. Interior lamp relay is located in the Instrument panel fuse box .
I/P Fuse Panel (Located Below Driver's Side of I/P )

Feb 28, 2015 | 2001 Ford Windstar

1 Answer

Hazard lights wont go off unless i disconnect battery on my 2003 windstar what's causing this???


most likely it is a stuck flasher relay located on the fuse panel. it is possible that the switch has gone bad but since your having to disconnect the battery i would say relay

Feb 16, 2011 | 2003 Ford Windstar

1 Answer

Car wont stay running


have you checked the auto shutdown relay and fuel pump?

joe

May 19, 2009 | 2003 Ford Windstar

1 Answer

Battery saver relay is on and wont start taurus 1999


where is the battery relay saver on ford ranger 98 4x4

May 03, 2009 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
2003 Ford Taurus Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...